number are shown on the display. If you wish to check the
restore source directory, press the cursor [
W] key.
5.
Turn the dial to select a restore source project, and
press the [ENTER] key.
The indication "LOAD SURE?" appears on the display, to
verify the restore process.
6.
To execute the restore process, press the [ENTER]
key. If you wish to cancel the process, press the
[EXIT] key instead.
When restore starts, the indication "LOAD wait..." appears
on the display. When the restore operation is finished, the
display indication changes to "LOAD COMPLETE".
7.
To return to the main screen, press the [EXIT] key
several times.
Deleting backup data
You can delete backup data (directories) from the media
used for backup (ZIP disk or MO disk or hard disk), if the
data is no longer needed.
Data saved on a CD-R/CD-RW disc cannot be deleted. In
case of a CD-RW disc, it is possible to delete the entire
disc in one operation, for later reuse (
→ p. 18).
1.
Verify that the SCSI device is connected correctly
to the MRS-1044 series.
Once a directory has been deleted, it cannot be restored.
Take care not to accidentally delete a directory that you
may still need.
2.
When using a MO drive, or ZIP drive, make sure
that the correct disk is inserted.
3.
In the main screen, press the [PROJECT/UTILITY]
key.
4.
Use the cursor [
E
]/[
R
] keys to make the display
indicate "UTILITY BACKUP", and then press the
[ENTER] key.
If the above menu does not appear, the MRS-1044 series
has not properly recognized the SCSI device. Check the
power on/off condition of the device and the SCSI
connection.
5.
Use the cursor [
E
]/[
R
] keys to make the display
indicate "BACKUP DELETE", and then press the
[ENTER] key.
The screen for selecting the project to delete appears.
6.
Turn the dial to select the project to be deleted,
and press the [ENTER] key.
The indication "DELETE SURE?" appears on the display,
to verify the delete process.
7.
To execute the delete process, press the [ENTER]
key. If you wish to cancel the process, press the
[EXIT] key instead.
When delete starts, the indication "DELETE wait..."
appears on the display.
When the delete operation is finished, the display
indication changes to "DELETE COMPLETE".
8.
To return to the main screen, press the [EXIT] key
several times.
• When wishing to delete backup data spanning several
media volumes, repeat the above procedure for each
volume.
• Always verify the directory name, to make sure that you
do not accidentally delete another project.
