Bedienungsanleitung Zoom R16 (Seite 2 von 100) (Englisch)

533793

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Usage and safety precautions

In this manual, symbols are used to highlight warnings and

cautions for you to read so that accidents can be prevented.

The meanings of these symbols are as follows:

Please observe the following safety tips and precautions to ensure

hazard-free use of the R16.

Power requirements

Since power consumption of this unit is fairly high, we

recommend the use of an AC adapter whenever possible.

If you use batteries, use either alkaline or nickel-metal

hydride batteries.

AC adapter operation

• Be sure to use only a DC5V/1A/center plus AC adapter

(ZOOM AD-14). Use of an adapter other than that

speciﬁed could damage the unit and pose a safety hazard.

• Connect the AC adapter only to an AC outlet that

supplies the rated voltage required by the adapter.

• When disconnecting the AC adapter from the AC outlet,

always grasp the adapter itself and do not pull on the

cable.

• During lightning or when not using the unit for an

extended period, disconnect the AC adapter from the

AC outlet.

Battery operation

• Use six conventional size AA-1.5 volt batteries.

• The R16 cannot be used for recharging. Pay close

attention to the labeling of the batteries to make sure

you choose the correct ones.

• When not using the unit for an extended period, remove

the batteries from the unit.

• If battery leakage has occurred, wipe the battery

compartment and the battery terminals carefully to remove

all remnants of battery ﬂuid.

• While using the unit, the battery compartment cover

should be closed.

About grounding

Depending on installation conditions, a slight electrical

charge may be felt when touching a metal part of the

R16. If you wish to avoid this, ground the unit by connecting

the ground screw on the rear panel to a good external

ground.

• To prevent the risk of accidents, never use any of the

following for grounding:

• Water pipes (risk of electric shock)

• Gas pipe (risk of explosion)

• Telephone wiring ground or lightning arrestor

(risk of lightning strike)

Environment

Avoid using your R16 where it will be exposed to:

• Extreme temperature

• High humidity, moisture, or splashing water

• Excessive dust or sand

• Excessive vibration or shock

Handling

Never place objects ﬁlled with liquids, such as vases, on

the R16 since this can cause electric shock.

The R16 is a precision instrument. Do not exert undue

pressure on the keys and other controls. Also take care

not to drop the unit, and do not subject it to shock or

excessive pressure.

Connecting cables and input and output jacks

You should always turn off the power to the R16 and all

other equipment before connecting or disconnecting

any cables. Also make sure to disconnect all connection

cables and the power cord before moving the R16.

Alterations

Never open the R16 case or attempt to modify the product

in any way since this can result in damage to the unit.

Volume

Do not use the R16 at a loud volume for a long time since

this could cause hearing impairment.

Electrical interference

For safety considerations, the R16 has been designed to provide

maximum protection against the emission of electromagnetic

radiation from inside the device, and protection from external

interference. However, equipment that is very susceptible to

interference or that emits powerful electromagnetic waves should

not be placed near the R16, as the possibility of interference

cannot be ruled out entirely.

With any type of digital control device, the R16 included,

electromagnetic interference could cause malfunction and could

corrupt or destroy data. Care should be taken to minimize the risk

of damage.

Cleaning

Use a soft, dry cloth to clean the R16. If necessary, slightly

moisten the cloth. Do not use abrasive cleanser, wax, or solvents

(such as paint thinner or cleaning alcohol), since these may dull

the ﬁnish or damage the surface.

Back up

The data on the R16 could be lost because of malfunction or

incorrect operation. Back-up your data.

Copyrights

Except for personal use, unauthorized recording from

copyrighted sources (CDs, records, tapes, video clips,

broadcast material and so on) is prohibited.

ZOOM Corporation does not bear any liability for injunctions

regarding copyright law infringement.

The SD symbol and SDHC symbol are trademarks.

Windows®/Windows Vista® are trademarks or registered

trademarks of Microsoft®.

Macintosh® and Mac OS® are

trademarks or registered trademarks of Apple Inc.

Steinberg and

Cubase are trademarks or registered trademarks of Steinberg Media

Technologies GmbH Inc.

Intel® and Pentium® are trademarks or

registered trademarks of Intel® Corporation.

AMD Athlon™ is a

trademark or registered trademark of Advanced Micro Devices, Inc.

All other trademarks, product names, and company names mentioned

in this documentation are the property of their respective owners. All

trademarks and registered trademarks mentioned in this manual are

for identiﬁcation purposes only and are not intended to infringe on the

copyrighted properties of their respective owners.

This symbol indicates explanations about extremely

dangerous matters. If users ignore this symbol and

handle the device the wrong way, serious injury or

death could result.

This symbol indicates explanations about dangerous

matters. If users ignore this symbol and handle the

device the wrong way, bodily injury and damage to

the equipment could result.

SAFETY PRECAUTIONS

Usage Precautions

Zoom R16 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom R16

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info