Bedienungsanleitung Zvox AccuVoice AV150 (Seite 6 von 8) (Englisch)

792458

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

6 Quick Setup Guide

Using Both Audio Inputs on the AccuVoice TV Speaker AV150

If you have your TV's optical digital output connected to the AV150’s optical

digital input, you could also use the AV150’s analog minijack input for a second

audio source. You can also connect an analog audio source to the MINIJACK

ANALOG input. This second source could be music from a portable audio

device, an audio disc in a player or the audio from a “music only” channel sent

to the AV150 from the analog audio output of a cable or satellite set top box.

To hear an audio source connected to the analog audio input on the ZVOX

AV150 TV Speaker, press the INPUT button on the TV Speaker remote control

until you see the GREEN light (the BLUE light is the digital input).

Connection Options

Placing The AccuVoice TV Speaker in Front of the TV.

Most people choose to place the ZVOX speaker in front of the TV. But it can also

be placed on any level surface near the TV – above, below or to the left or right.

Choose a place that lets you direct the ZVOX Speaker towards the TV viewers.

• A safe, secure installation of the AccuVoice TV Speaker is the

owner’s responsibility.

• Do not place any objects on top of the AccuVoice TV Speaker.

Placement Options

ZVOX Speaker Wall Mounting Information

The AV150 speaker has two M3 threaded sockets in the enclosure back.

Two 10mm length screws are provided for these sockets. With the correct

additional hardware, you can use these sockets to secure the ZVOX AV150

speaker to most at surfaces, like a wall or shelf. Longer screws may be

necessary NOTE: It is the ZVOX AV150 owner’s responsibility to ensure the

any such mounting is safe and secure. Each of the two mounting sites should

be able to secure a ve pound (3 KG) object.

Volume Up/Down

Volume Up blinks ORANGE.

Volume Down blinks YELLOW.

Power

The Power button switches the ZVOX

speaker between STANDBY and On.

Note: The ZVOX AV150 will also enter

STANDBY if it receives no audio signal for

approximately 30 minutes. A command

from a remote control or a restored audio

signal will turn it back on.

Input Selection

Press the INPUT button on the ZVOX

remote to select between the speaker’s

two inputs (BLUE or GREEN lights).

The choices are:

Optical digital — BLUE

Analog minjack — GREEN

Mute

Press this button to mute the ZVOX speaker.

When MUTE function is active, the display

blinks the Volume lights. The AV150 will

enter Standby if it is left in MUTE for longer

than ve minutes.

Button Functions on the

ZVOX Remote Control

Remote Control Button Layout.

TV to AV150 Audio Signal Cable Guide

The AV150 includes two analog signal cables and one optical digital signal

cable. One of these three cables will connect from most TVs or cable/

satellite set top boxes to the digital or analog input on the AV150. In the rare

instance your TV or cable/sat set top box has only an optical minijack audio

output, an optical miniplug to standard optical plug cable is needed (not

supplied with the AV150).

INPUT

SURROUND

POWER

MUTE

ACCUVOICE

VOLUME

OTHER

SETTINGS (PS)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zvox AccuVoice AV150 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zvox AccuVoice AV150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info