Bedienungsanleitung Zvox SB380 SoundBar (Seite 10 von 12) (Englisch)

792485

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Other Settings Button

The Other Settings button allows Bass and Treble adjust-

ment and turns Output Leveling On and Off.

1) Bass Adjustment: The rst press of the Other Settings but-

ton displays the current Bass setting. The range of bass ad-

justment goes from LO 4 to LO-6 (This display is shorthand

for Lows plus 4 and Lows minus 6). Use the volume buttons

to adjust the bass output across this range. Then wait for the

adjustment display to turn off.

2) Treble Adjustment: A second press of the Other Settings

button displays the current Treble setting. (The range of

treble adjustment is HI 4 to HI-4. That is shorthand for Highs

plus 4 and Highs minus 4). Use the volume buttons to adjust

the bass output across this range. Then wait for the adjust-

ment display to turn off.

3) Output Leveling: A third press of the Other Settings button

displays the Output Leveling feature. The display will be ei-

ther OL (Output Leveling engaged) or noOL (Output Leveling

off). Use the volume buttons to turn Output Leveling on or

off. Then wait for the adjustment display to turn off.

When engaged, Output Leveling prevents large swings in

volume. It also reduces volume differences between TV

channels on cable or satellite systems.

A fourth press of the Other Settings button returns you to the

current volume setting and exits Other Settings adjustment.

OTHER

SETTINGS (PS)

Bass set at -2

Treble set at 1

Output Leveling On

Mute

MUTE VOLUME INPUT

End Panel Controls on the Soundbar

On the viewer’s right end of the soundbar are four buttons.

A) POWER button:

This button turns the soundbar “ON” if it is in Standby. If this

button pressed briey while the soundbar is “ON”, it will mute

and unmute the soundbar. To turn off the soundbar, press and

hold down this button for about ve seconds.

B) Volume Up/Down rocker button:

Adjusts volume up and down. Pressing either side of this but-

ton will “unmute” the speaker if it is muted.

C) Input button:

A brief press and release of the INPUT button selects the next

input in sequence.

Tonal Prole Setting

The soundbar has three settings to better match the acoustics

of its room position.

Face Front......... PS16 - on a at surface, facing front.

Face Up............. PS17 - on a at surface, facing up.

Wall mount........ PS18 - on a vertical surface, facing into the

room.

The default setting for the soundbar is Face Front.

If your soundbar’s position is Face Up or Wall mount, you

should select PS17 or PS18 from the PS menu.

PS Menu operation: You bring up the PS menu by pressing

down on two buttons on the end panel of the soundbar:

Power ( ) and Volume Up (+). After about ve to seven sec-

onds, you should see PS start ashing. The rst time you bring

up the PS menu, it should show “PS 0”.

Once you see the PS display, release the buttons. Then press

and release the Volume Up button to increase the PS number.

Continue pressing and releasing the Volume Up button until

you reach the setting you want: PS16, PS17 or PS18.

For further information about the options provided by the PS

menu, see the separate information sheet Soundbar Adjust-

ment Options, available online at ZVOX Audio’s website.

8 Remote Control and End Panel - SB380 Soundbar

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zvox SB380 SoundBar Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zvox SB380 SoundBar

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info