544197
164
Zoom out
Zoom in
Vorherige Seite
1/384
Nächste Seite
Chapter 8 Storage
Media Server User’s Guide
164
You see a warning screen before you delete a volume.
Figure 58 Delete a Volume Warning Screen
8.2.3 Volume Status
You (the administrator) can see the status of a volume in the Status or Storage screens.
The NSA has the following classifications for the status of a volume:
Healthy if all disks in the volume are OK and the file system is functioning properly.
OK means the USB connected device is functioning properly.
Resync when you create a RAID volume.
Recovering appears when repairing a RAID 1 volume. (A RAID1 volume was once degraded, but
you have installed a new disk and the NSA is restoring the RAID1 volume to a healthy state.)
Degraded when a volume is currently down, but can be fixed. Data access may be slower from a
degraded volume, so it’s recommended that you replace the faulty disk and repair the volume as
soon as you can.
Inactive when a disk is missing from a RAID 0 volume or a two-disk JBOD volume. The volume
is unusable. If you removed one of the disks you should be able to re-install it and use the
volume again (as long as you did not change anything on the disk). If a disk has failed, you need
to replace it and re-create the whole volume. All data will be lost. See page 348 for how to install
or replace a hard drive.
Down when a volume is down and can not be fixed.
A down RAID volume cannot be used until you repair or replace the faulty disk(s) in the volume.
Degraded means one of the disks in the RAID volume is not available but the volume can still be
used. For a degraded volume, you should replace the faulty disk as soon as possible to obtain
previous performance. See your Quick Start Guide for more information on replacing a disk.
Capacity This field shows total disk size, the percentage of the volume being used and the
percentage that is available.
Actions This field displays icons allowing you to edit, scan, repair, expand, migrate, or delete a
volume. You can also locate or eject an external volume.
Note: If you delete a volume, all data in the volume disk(s) is erased.
Table 22 Storage > Volume (continued)
LABEL DESCRIPTION
164

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL NSA325 v2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL NSA325 v2

ZyXEL NSA325 v2 Kurzanleitung - Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info