Bedienungsanleitung ZyXEL NSA325 v2 (Seite 351 von 384) (Englisch)

544197

351

Zoom out

Zoom in

Vorherige Seite

1/384

Nächste Seite

Chapter 20 Troubleshooting

Media Server User’s Guide

351

I cannot get to the NSA login screen.

• Use the NAS Starter Utility to discover your NSA. If you have admin privileges, you can directly

change the IP address of the NSA using the NAS Starter Utility.

• Make sure you have used the NAS Starter Utility to initialize your NSA.

• If you used the RESET button, the NSA may have a new IP address. Close and reopen the NAS

Starter Utility to discover the NSA.

• Make sure the NSA is turned on.

• If you are trying to login directly by typing the server name into your web browser’s address

field, make sure you are using the correct server name as the web site address.

• The default server name is ‘nsa’ followed by the number of your model (‘nsa320’ for

example). If you have changed the server name, use the new one.

• If the server name has been changed and you do not know the new server name, see the

troubleshooting suggestions for I forgot the server name of the NSA.

• If it still doesn’t work, try using the NAS Starter Utility.

• Check the hardware connections, and make sure the LEDs are behaving as expected. See the

Quick Start Guide and Section 21.1 on page 371.

• By default, the NSA gets an IP address automatically. The NSA assigns itself an IP address if no

device assigns one. If your computer is also set to get an IP address automatically, the computer

and the NSA can both assign themselves IP addresses and communicate. See Section 9.4 on

page 176 if you need to configure the NSA with a static IP address.

• If you are connecting to the NSA by its IP address, make sure you use the correct one. If the NSA

has a wired Ethernet connection and a wireless connection through an attached USB wireless

dongle, the NSA has a different IP address for each connection. To connect through the wired

Ethernet connection, use the wired Ethernet connection’s IP address. To connect through the

wireless connection, use the wireless connection’s IP address.

• Make sure your computer’s IP address is in the same subnet as the NSA’s IP address. You can use

the NAS Starter Utility to find the NSA’s IP address. Skip this if you know that there are routers

between your computer and the NSA.

• Ping the NSA from your computer. Make sure your computer’s Ethernet adapter is installed and

functioning properly. In a (Windows) computer, click Start, (All) Programs, Accessories and

then Command Prompt. In the Command Prompt window, type “ping” followed by the NSA’s

IP address (use the NAS Starter Utility to find the NSA’s IP address if you don’t know it) and then

press [ENTER].

• Make sure you are using Internet Explorer 6.0 (and later) or Firefox 1.07 (and later).

• Make sure your Internet browser does not block pop-up windows and has JavaScript and Java

enabled. With Internet Explorer 6, you may also have to enable scripting of safe ActiveX controls.

See Section 20.4.1 on page 352.

I forgot the password.

• The default password is 1234.

• If you have changed the password and forgotten it, you will have to reset the NSA.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL NSA325 v2 Seite 351

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL NSA325 v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info