Bedienungsanleitung ZyXEL Prestige 2000W v.2 (Seite 2 von 6) (Englisch)

65664

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Date: 2005-04-06

2 (2)

since the VIA headers are added again to the outgoing response. See section 2.4 below on

how to limit the size of IP packets in the Internet Gate.

1. Connect the power cable from your ZyXEL cradle to your power outlet.

2. Switch on the ZyXEL handset by holding down the

key during a few seconds.

If it does not respond, the battery might not be charged. Charge the batteries and try

again later

1.1 Two basic ways to setup your phone / client

You can use your SIP phone/client in two basic ways:

(A) registered at an operator’s

SIP server, or

(B) registered at your Internet Gate, using the Internet Gate as the SIP server.

(A) If you will register your client at an operator’s SIP server, you should skip section 1.4

below and instead follow the SIP setup descriptions given by your operator. In this case

you do not need to do any configuration of SIP accounts on your Internet Gate. Also, make

sure to turn off any NAT or firewall traversal tricks such as STUN, TURN, ICE in your

phone. The Internet Gate is SIP transparent by default and will forward outgoing and

incoming SIP traffic.

(B) If the Internet Gate will be used as SIP server, you should setup user accounts on it.

The Internet Gate supports SIP server registrations both from the LAN and the WAN (e.g.

Internet). By default the Internet Gate will grant all SIP server registrations from the LAN

without any authentication. In order to control who is allowed and who is disallowed to

on the Internet Gate. Our recommendation is that you setup user accounts on the Internet

Gate for all users – whether LAN users or WAN users - since this gives you administration

control and give the users maximum flexibility. Also, if you have the SIP Switch software

upgrade installed the setup of user accounts makes it easy to assign a short extension

number to each user. Please refer to www.intertex.se/upfiles/SIPSwitchDescription.pdf

for

more info on setting up short extension numbers with the SIP Switch.

1.2 Configuring the wireless network on the Internet Gate

1. Surf into your Internet Gate by entering http://192.168.0.1 in your web browser’s

URL- field.

2. Below Configurations: choose Network.

3. Verify that the wireless setting AIR used as is not disabled and that the DHCP

server box is checked.

4. Choose Wireless Settings

5. Enter a suitable wireless network name in the text box Network Name

(SSID), e.g. IGSIP.

6. It is recommended that you in some way limit the access to your wireless network

since your LAN otherwise is completely open and vulnerable to attacks. There are

several ways to limit the wireless access: a) using WEP encryption with a associated

Same as ITSP (Internet Telephony Service Provider)

INTERTEX DATA AB

Rissneleden 45, SE-174 44, Sweden, Tel: +46 8 6282828, Fax: +46 8 6286414, www.intertex.se

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL Prestige 2000W v.2 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info