805547
1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
MILUX
General safety information
The instructions described in this manual must be observed. Failure to comply with
theses instructions will result in material damages, injury or fatal accidents.
This product must be used exclusively to regulate heating installations.
Other use is not compliant
Contents
1. Product characteristics
2. Display
3. Keypad
4. First use
5. Standby switch
6. Operating modes
6.1. TIME SETTING menu
6.2. COMFORT Mode
6.3. REDUCED Mode
6.4. AUTOMATIC Mode
6.5. PROGRAM Menu
6.6. ANTIFREEZE Mode
7. Special functions
7.1. HOLIDAY function
7.2. Keypad lock
7.3. Cooling function
7.4. RESET function
8. Battery replacement
9. ITCS function (optional)
10. Technical characteristics
11. Problems and solutions
12. Recycling
13. Annexes
1. Product characteristics
Weekly programmation by 1 hour step
9 built-in programs
4 user programs
Program graphic display
Room temperature and time display.
Comfort / Reduced / Anti-freeze temperatures.
Temporary temperature override
Automatic or Manual operation
Holiday function
Keypad lock function (child safety)
Battery operated > 2 years
Low battery pictogram
Battery replacement without loss of the program memory except the
hour
« O / I » switch for standby mode
Intelligent Temperature Control System function (optional): ITCS
2. Display
[1] : Operating mode menu
[2] : Temporary temperature override
[3] : Heating indicator
[4] : Room temperature or set temperature
[5] : Cooling indicator
[6] : if displayed, [4] indicates the ambient temperature
[7] : Holiday function activated
[8] : Current day graphic program
[9] : Hour
[10] : Day of the week (only available on weekly version)
[11] : Low batteries
3. Keypad
Validation key (OK)
Plus key (+)
Minus key (-)
Left navigation key (◄ )
Right navigation key (►)
4. First use
Check that the battery protection is well removed.
Put the switch on « I » position (see chapter 5- stanby switch))
Adjust the date and the hour (see chapter 6.1 TIME SETTING menu)
The thermostat is ready for operation. The default operating mode is the
automatic mode with the factory program P1”,(see the detailed program
P1” in the annexes).
You can customize your program as you want. To do so, refer to chapter 6.5
PROGRAM Menu.
5. Standby switch
This switch is located under the product as shown below:
To put the product in standby, put the switch on « O » position. The screen
switches off to reduce battery consumption. The keys (+), (-), (◄) and (►) become
inactive. A press on (OK) key allows displaying briefly the ambient temperature
and the hour, together with the pictogram:
To activate the product, put the switch on « I » position. During 3 seconds, the
software version will be displayed. Then, the thermostat comes back in the
selected operating mode before the standby.
WARNING: In this standby mode, your installation can freeze.
6. Operating modes
Use the navigation keys (◄) or (►) to change the operating mode.
6.1. TIME SETTING menu :
Press (OK) to enter in the menu. The minute display is flashing.
Set minute value with (+) and (-) keys
Press (OK) key to validate.
Set hour value with (+) and (-) keys
Press (OK) key to validate.
( (►) key allows to return to the minute setting)
Weekly version
Set day value with (+) and (-) keys
(1=monday, 2=tuesday, …)
Press (OK) key to validate
6.2. COMFORT Mode :
In this mode, thermostat applies comfort setpoint temperature indefinitely. By
pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted:
The ambient temperature is displayed after few seconds:
A press on (OK) key allows the displaying of comfort setpoint temperature.
To apply temporarily comfort mode, use the special function « HOLIDAY ».
6.3. REDUCED Mode :
In this mode, the thermostat applies reduced setpoint temperature indefinitely
By pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted like
the COMFORT temperature. The ambient temperature is displayed after few
seconds. A press on (OK) keys allows the displaying of reduced setpoint
temperature.
To apply temporarily reduced mode, use the special function « HOLIDAY ».
6.4. AUTOMATIC Mode :
The thermostat follows the chosen program (see chapter 6.5 for the program
selection / edition) with respect to current hour.
By pressing (+) and (-), an overriden temperature can be adjusted until the next
program step:
The pictogram is displayed.
At the next program change, the pictogram will disappear and the program will
carry on.
6.5. PROGRAM Menu:
Press (+) or (-) keys to choose a program number:
= Comfort setpoint temperature set in the COMFORT mode
= Reduced setpoint temperature set in the REDUCED mode
If you select a built-in program « P1 to P9 », press (OK) key to apply this
program in the automatic mode .
A light weekly programs description is given below:
Number Description
P1 Morning, Evening & Week-end
P2 Morning, Midi, Evening & Week-end
P3 Day & Week-end
P4 Evening & Week-end
P5 Morning, Evening (bathroom)
P6 Morning, Afternoon & Week-end
P7 7h - 19h (Office)
P8 8h - 19h, Saturday (Shop)
P9 Week-end (Secondary House)
A detailed programs description is given in annexes.
If you select a user program « U1 à U4 », press (OK) key to enter in edition
mode :
With navigation keys (◄) and (►), move the blinking cursor on the hour of the day
that you want to modify.
When the day seems to be correctly edited, press (OK) key.
Daily version: the day’s program is validated for every day of the week.
Weekly version: you switch to the next day edition. By validating the day 7, you
validate the program edition. This program will be followed by your thermostat in
automatic mode (see chapter 6.4).
6.6. ANTIFREEZE Mode :
In this mode, the thermostat applies antifreeze setpoint temperature indefinitely. By
pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted like the
COMFORT temperature. The ambient temperature is displayed after few
seconds. A press on (OK) keys allows the displaying of the antifreeze setpoint
temperature.
To apply temporarily the antifreeze mode, use the special function « HOLIDAY ».
PPLIMW15281Ac
GB
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Watts Milux wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info