Bedienungsanleitung Watts Milux (Seite 2 von 2) (Englisch)

805547

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

7. Special functions

7.1. HOLIDAY function :

Go to HOLIDAY mode by using navigation keys (◄) and (►). The

pictogram and the text “no” must flash:

You can adjust the duration. Press (+) or (-) keys to adjust hour number (H) if it is

less than 24 hours, then the day number (d).

With navigation keys (◄) and (►), select the comfort or reduced or

antifreeze mode. The pictogram and the remaining number of hours /

days will be displayed until the period’s end:

Once completed, the thermostat will switch on automatic mode .

To stop holiday mode before the period’s end, go to HOLIDAY menu with

navigation keys (◄) and (►). pictogram and the remaining time flash. Use (-)

key to display “no” and validate with (OK) key.

7.2. Keypad lock

This is a prevention function against any parameter change. It is valid in comfort

, automatic , reduced and antifreeze mode.

To lock the keypad, maintain (OK) key pressed then press on (-) or (+) keys.

is displayed.

To unlock the keypad, maintain (OK) key pressed then press on (-) or (+) keys.

is displayed.

7.3. Cooling function :

You can use your MILUX RF to control a cooling system (air-conditioner…). To

change thermostat operating mode, move the cursor on the comfort menu

with navigation keys (◄) and (►). Then, maintain (OK) key pressed and press

simultaneously on (◄) key. One of the below screens must appear:

Use (+) or (-) keys to modify the operating mode. Press (►) key to come back to

the main screen and to validate your selection.

In cold mode “COLD”, the antifreeze mode is removed.

7.4. RESET function :

This function is used to erase all programs and to restore the default

manufacturing parameters.

Go to TIME SETTING menu , maintain (OK) key pressed during 10 seconds.

All display’s segments will light up. It will demonstrate that the thermostat is in

reset phase. Once completed, the thermostat restarts in the delivery configuration

with the following default settings:

 U1 to U4 programs reset all in comfort.

 In heating mode :

Setting temperatures: 21°C, 17°C, 6°C.

 In cooling mode:

Setting temperatures: 22°C, 24°C

WARNING: Remember to adjust time value after the reset (see chapter

6.1)

8. Battery replacement

Once the low battery pictogram is displayed, you have to replace the batteries.

 Put on the clip on the left side and pull the front face to remove it :

 Replace the both batteries:

 Close the thermostat by placing the front face in front of the rear face

and push on it to lock:

WARNING: Remember to adjust the value of the time after the reset

(see chapter 6.1)

9. ITCS function (optional)

Your thermostat has an Intelligent Temperature Control System (ITCS). It will

activate your installation in advance to ensure the desired temperature at the hour

programmed following your weekly program.

To operate, this Intelligent Temperature Control System realizes automatically

several time measurements. When you switch on your thermostat for the first time,

a time measurement taken to reach the setting temperature is realized. This time

will be adjusted by new measurements at each program change to adapt with

outside temperature evolution. Then, you can program your thermostat without

advancing the switch on times because it will be done automatically for you.

10. Technical characteristics

Environment. (Temperatures)

Operating temperature:

Transport and storage :

0°C - 40°C

-10°C to +50°C

Measurement precision 0.1°C

Set temperature range :

Comfort and Reduced

Antifreeze

5°C - 35°C by 0,5°C step

0,5 - 10°C by 0,5°C step

Regulation characteristics

Cycle (PWM): 15 minutes for 2°C with

Anti-short cycle of 3 minutes in OFF and 2

minutes in ON.

Electrical Protection Class II - IP30

Batteries &

Operating life

2 LR3 AAA 1.5V Alkaline batteries

~ 2 years

Sensible elements:

Internal

NTC 10k ohms at 25°C

Connection 3 points screw connector in the bottom of

the case

Max. switching current/voltage 5A/400 VAC resistive

CE Directives

Your product has been designed

in conformity with the European

Directives.

EMC 2004/108/EC

RoHS 2011/65/EU

Product conformed to :

Classification :

Contribution :

UE 811/2013 and 2010/30/UE

(2%)

11. Problems and solutions

My thermostat doesn’t switch on

Battery problem

- Check that the batteries protection is well removed.

- Check the direction of the batteries.

- Check the batteries charge

- Check the switch position

My thermostat displays an error message

Sensor problem

The message Err is displayed and the pictogram

flashes (ambient sensor)

Low batteries The pictogram flashes

- Replace the batteries

My thermostat seems to operate correctly but the heating doesn’t function

correctly

Output - Check the receiver connections.

- Check the power supply of the heating element.

In case of persistent problems, contact your installer or seller.

12. Recycling

Electrical and electronic out of order appliances must be collected

separately by using specific systems in your country.

Batteries should not be recycled with household waste but collected

in suitable collection systems

13. Annexes

Comfort =

Reduced =

= daily version

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Watts Milux Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info