Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
43
1
82
ALED1905T
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    ALED1905T

    1
    43
    82



  • Page 2

    Contents
    Features ............................................................... 44
    Introduction ........................................................... 44
    Preparation ........................................................... 44
    Safety Precautions ............................................... 45
    Power................................................................ 45
    Connection to a Television Distribution System
    (Cable TV etc.) from Tuner ............................... 46
    Package Contents ................................................ 47
    Environmental Information ................................... 47
    Repair Information ............................................ 47
    Remote Control Buttons ....................................... 48
    LCD TV and Operating Buttons ............................ 49
    Viewing the Back side Connections ..................... 49
    Viewing the Connections - Side Connectors ........ 50
    Power Connection ................................................ 50
    Using Digital Multimedia Connectors.................... 51
    USB Memory Connection ................................. 51
    Connecting the LCD TV to a PC........................... 51
    Using Side AV Connectors ................................... 51
    Connecting to a DVD Player via HDMI ................. 51
    Connecting to a DVD Player via Component
    Sockets (YPbPr) or Scart Cable ........................... 52
    Remote Control Handset ...................................... 52
    Inserting Batteries ............................................. 52
    Switching On/Off................................................... 52
    To Switch the TV On ......................................... 52
    To Switch the TV Off ......................................... 52
    Input Selection ...................................................... 53
    Basic Operations .................................................. 53
    Operation with the Buttons on the TV ............... 53
    Volume Setting .............................................. 53
    Programme Selection ................................... 53
    AV Mode ....................................................... 53
    Operation with the Remote Control .................. 53
    Volume Setting .............................................. 53
    Programme Selection (Previous or Next
    Programme) .................................................. 53
    Programme Selection (Direct Access) .......... 53
    Viewing Electronic Programme Guide (EPG) ....... 53
    First Time Installation............................................ 54
    Installation ............................................................ 55
    Automatic Channel Scan (Retune) Menu
    Operation .......................................................... 55
    Manual Tuning ..................................................... 55
    Digital Manual Search....................................... 55
    Analogue Manual Search ................................. 56
    Analogue Fine Tune.......................................... 56
    Clear Service List (*) ......................................... 56
    Managing Stations: Channel List .......................... 56
    Operating the Channel List ............................... 56
    Moving a Channel ............................................. 56
    Deleting a Channel ........................................... 56

    Renaming a Channel ........................................ 56
    Locking a Channel ............................................ 57
    Managing Stations: Favourites ............................. 57
    Button Functions ............................................... 57
    Managing Stations: Sorting Channel List ............. 57
    On-Screen Information ......................................... 57
    Media Playback Using Media Browser ................. 58
    Viewing Photos via USB ................................... 58
    Media Browser Settings .................................... 59
    Changing Image Size: Picture Formats ................ 59
    Configuring Picture Settings ................................. 60
    Operating Picture Settings Menu Items ............ 61
    Picture Settings Menu Items ............................. 61
    PC Picture Settings........................................... 61
    Configuring Sound Settings .................................. 62
    Operating Sound Settings Menu Items ............. 62
    Sound Settings Menu Items.............................. 62
    Configuring Your TV’s Settings ............................. 62
    Operating Settings Menu Items ........................ 62
    Settings Menu Items ......................................... 62
    Using a Conditional Access Module ..................... 63
    Viewing Conditional Access Menu (*) ............... 63
    Configuring Language Preferences ...................... 63
    Language Settings ............................................ 64
    Parental Control.................................................... 64
    Parental Settings Menu Operation ................... 64
    Timers ................................................................... 64
    Setting Sleep Timer .......................................... 64
    Setting Programme Timers ............................... 65
    Adding a Timer .............................................. 65
    Editing a Timer .............................................. 65
    Deleting a Timer ............................................ 65
    Configuring Date/Time Settings ............................ 65
    Configuring Source Settings ................................. 66
    Configuring Other Settings ................................... 66
    Operation .......................................................... 66
    Other Features ..................................................... 67
    Teletext ................................................................. 67
    Tips ....................................................................... 67
    Appendix A: PC Input Typical Display Modes....... 68
    Appendix B: AV and HDMI Signal Compatibility
    (Input Signal Types).............................................. 68
    Appendix C: Supported DVI Resolutions.............. 69
    Appendix D: Supported File Formats for USB
    Mode..................................................................... 69
    Appendix E: Software Upgrade ............................ 70
    Specifications ....................................................... 71
    MOBIL TV INSTRUCTION MANUAL ................... 72

    English - 43 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 43

    29.04.2011 15:20:40



  • Page 3

    Introduction

    Features
    • Remote controlled colour LCD TV.
    • Fully integrated Terrestrial digital TV (DVB-T MPEG2)
    • HDMI connectors for digital video and audio. This
    connection is also designed to accept high definition
    signals.
    • USB input.
    • 1000 programmes (analogue+digital).
    • OSD menu system.
    • Integrated tuner MPEG2 compatible.
    • Scart socket for external devices (such as video,
    video games, audio set, etc.).
    • Stereo sound system. (German+Nicam)

    Thank you for choosing this product. This manual will
    guide you for the proper operation of your TV.
    Before operating the TV, please read this
    manual thoroughly. Please do keep this
    manual in a safe place for future references.
    This device is intended to receive and display TV
    programs. The different connection options make
    an additional expansion of the reception and display

    • Teletext, fastext, TOP text.

    sources possible (receiver, DVD player, DVD
    recorder,

    • Headphone connection.
    • Automatic programming system.

    VCR, PC etc.). This device is only suitable for the
    operation in dry interiors. This appliance is intended
    solely for private domestic use and may not be used
    for industrial and commercial purposes. We exclude
    liability in principle, if the device is not used as
    intended, or unauthorized modifications have been
    made. To operate your LCD TV in extreme ambient
    conditions may cause the damage of the device.

    • Forward or backward manual tuning.
    • Sleep timer / Child lock.
    • Automatic sound mute when no transmission.
    • NTSC playback.
    • AVL (Automatic Volume Limiting).
    • Auto power down.

    Preparation

    • PLL (Frequency Search).
    • PC input.
    • Plug&Play for Windows 98, ME, 2000, XP, Vista,
    Windows 7.
    • Game Mode

    Please read the corresponding instructions of this
    handbook prior to the first usage of the device, even
    when the usage of electronic devices is familiar
    to you. Notice especially the chapter SAFETY
    PRECAUTIONS. Carefully keep the handbook as
    future reference. When selling the device or giving it
    away, absolutely give these direction for use.

    For ventilation, leave a free space of at least 10 cm
    all around the set. To prevent any fault and unsafe
    situations, please do not place any objects on top of
    the set. Use this device in moderate climates.

    10 cm

    10 cm

    10 cm

    English - 44 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 44

    29.04.2011 15:20:41



  • Page 4

    Safety Precautions

    Heat and Flames

    Read the following recommended safety
    precautions carefully for your safety.

    Power
    • Always use the provided AC adaptor.
    • Operate only from the power source specified on
    the AC adaptor.
    • The power adaptor may become hot during normal
    operation. This is not a malfunction.
    • Please make sure that the adaptor is not covered
    while in operation. Leave a space of 15 cm
    (minimum) around the AC adaptor.
    • The rating information and safety caution of the AC
    adaptor are provided on the adaptor.
    WARNING: When the set is not in use for a long time,
    disconnect from the power.

    Power Cord
    Do not place the set, a piece of furniture, etc. on the
    power cord (mains lead) or pinch the cord. Handle the
    power cord by the plug. Do not unplug the appliance
    by pulling from the power cord and never touch the
    power cord with wet hands as this could cause a short
    circuit or electric shock. Never make a knot in the cord
    or tie it with other cords. The power cords should be
    placed in such a way that they are not likely to be
    stepped on. A damaged power cord can cause fire or
    give you an electric shock. When it is damaged and
    needs to be replaced, it should be done by qualified
    personnel.

    Moisture and Water
    Do not use this device in a humid and
    damp place (avoid the bathroom, the
    sink in the kitchen, and near the washing
    machine). Do not expose this device to
    rain or water, as this may be dangerous
    and do not place objects filled with
    liquids, such as flower vases, on top.
    Avoid from dripping or splashing.

    The set should not be placed near to
    open flames and sources of intense heat
    such as an electric heater. Ensure that
    no open flame sources, such as lighted
    candles, are placed on top of the TV. Batteries should
    not be exposed to excessive heat such as sunshine,
    fire or the like.

    Lightning
    In case of storm and lightning or when
    going on holiday, disconnect the power
    cord from the wall outlet.

    Replacement Parts
    When replacement parts are required, make sure that
    the service technician has used replacement parts,
    which are specified by the manufacturer or have the
    same specifications as the original one. Unauthorized
    substitutions may result in fire, electrical shock or
    other hazards.

    Servicing
    Please refer all servicing to qualified
    personnel. Do not remove the cover
    yourself as this may result in an electric
    shock.

    Waste Disposal
    • Instructions for waste disposal:
    Packaging and packaging aids are recyclable and
    should principally be recycled. Packaging materials,
    such as foil bag, must be kept away from children.
    Batteries, including those which are heavy metal-free,
    should not be disposed of with household waste.
    Please dispose of used battery in an environment
    friendly manner. Find out about the legal regulations
    which apply in your area.
    • Don’t try to recharge batteries. Danger of explosion.
    Replace batteries only with the same or equivalent
    type.

    If any solid object or liquid falls into the cabinet, unplug
    the TV and have it checked by qualified personnel
    before operating it any further.

    Cleaning
    Before cleaning, unplug the TV set
    from the wall outlet. Do not use liquid
    or aerosol cleaners. Use soft and dry
    cloth.

    This symbol on the product or on its packaging means
    that your electrical and electronic device
    should be disposed at the end of its
    service life separately from your
    household wastes. There are separate
    collection systems for recycling in EU.
    For more information, please contact the
    local authority or the dealer where you
    purchased the product.

    Disconnecting the Device

    Ventilation
    The slots and openings on the TV set are intended for
    ventilation and to ensure reliable operation. To prevent
    overheating, these openings must not be blocked or
    covered in anyway.

    The mains plug is used to disconnect TV set from
    the mains and therefore it must remain readily
    operable.

    English - 45 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 45

    29.04.2011 15:20:42



  • Page 5

    Headphone Volume
    Excessive sound pressure from earphones
    and headphones can cause hearing loss.

    Installation
    To prevent injury, this device must be securely
    attached to the wall in accordance with the installation
    instructions when mounted to the wall (if the option
    is available).

    LCD Screen
    The LCD panel is a very high technology product with
    about a million thin film transistors, giving you fine
    picture details. Occasionally, a few non-active pixels
    may appear on the screen as a fixed blue, green or
    red point. Please note that this does not affect the
    performance of your product.
    Warning! Do not leave your TV in standby or operating
    mode when you leave your house.

    Connection to a Television Distribution
    System (Cable TV etc.) from Tuner
    Device connected to the protective earthing of the
    building installation through the mains connection or
    through other apparatus with a connection to protective
    earthing-and to a television distribution system using
    coaxial cable, may in some circumstances create a
    fire hazard.
    Connection to a cable distribution system has
    therefore to be provided through a device providing
    electrical isolation below a certain frequency range
    (galvanic isolator, see EN 60728-11).
    Note: The HDMI connection between PC and TV
    may cause radio interference in which case it is
    recommended to use VGA(DSUB-15) connection.

    The Standby Off/On button doesn´t separate this
    device completely from mains. Moreover the device
    consumes power in the standby operation. In order to
    separate the device completely from mains, the mains
    plug has to be pulled from the mains socket. Because
    of that the device should be set up in a way, that an
    unobstructed access to mains socket is guaranteed,
    so that in case of emergency the mains plug can be
    pulled immediately. To exclude the danger of fire, the
    power cord should principally be separated from the
    mains socket prior to a longer period of non-usage,
    i.e. during vacations.
    Electrical device not in the hands of children
    Never let children use electrical device unsupervised.
    Children can´t always recognize properly the
    possible dangers. Batteries / accumulators can be
    life threatening when swallowed. Store batteries
    unreachable for small children. In case of swallowing
    a battery medical aid has to be sought immediately.
    Also keep the packaging foils away from children.
    There is danger of suffocation.
    Licence Notification (optional)
    Manufactured under license from Dolby
    Laboratories.
    TRADEMARK ACKNOWLEDGMENT
    “Dolby” and the double-D symbol are trademarks of
    Dolby Laboratories.

    Be sure to ground the connection properly.
    Connect the ground terminal of the AC adaptor with the ground
    terminal provided at the power outlet using the enclosed power cord.
    If the provided plug does not fit your outlet, consult an electrician for
    replacement of the obsolete outlet.
    English - 46 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 46

    29.04.2011 15:20:43



  • Page 6

    Package Contents

    Environmental Information
    • This television is designed to consume less energy
    to save environment.
    You not only help to save the environment but also
    you can save money by reducing electricity bills
    thanks to the energy efficiency feauture of this TV.
    To reduce energy consumption, you should take the
    following steps:
    • You can use Power Save Mode setting, located in
    the Feature menu. If you set Power Save Mode
    as On, the TV will switch to energy-saving mode
    and luminance level of TV set will be decreased to
    optimum level. Note that some picture settings will
    be unavailable to be changed when the TV is in
    Power Save Mode.

    LCD TV

    Batteries: 2 X AAA

    • When the TV is not in use, please switch off or
    disconnect the TV from the mains plug. This will
    also reduce energy consumption.

    Remote Control

    • Disconnect power when going away for longer
    time.

    Instruction Book

    • Note that annually, using the TV set in Power Save
    Mode has more power efficiency than disconnecting
    the TV from the mains plug instead of keeping
    stand-by mode. Therefore it is highly recommended
    to activate Power Save Mode setting to reduce
    your annual power consumption.And also it is
    recommended to disconnect the TV from the mains
    plug to save energy more when you do not use.
    • Please helps us to save environment by following
    these steps.

    Repair Information

    1 X Video & Audio Connection Cable
    Note: You should check the accessories after purchasing.
    Make sure that each accessory is included.

    Please refer all servicing to qualified personnel. Only
    qualified personnel must repair the TV. Please contact
    your local dealer, where you have purchased this TV
    for further information.

    English - 47 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 47

    29.04.2011 15:20:44



  • Page 7

    Remote Control Buttons
    1. Standby
    2. Image size/ Expand (in TXT mode)

    INFO

    3. Sleep timer
    4. Numeric buttons
    SLEEP

    5. Return / Exit (in DTV mode) / Index page (in
    TXT mode)

    SCREEN

    SOURCE

    PRESETS

    6. Cursor up / Page up (in TXT mode)
    7. Cursor left
    8. Programme up (Page down in DTV mode)
    9. Programme down (Page up in DTV mode)
    10. Mono-Stereo / Dual I-II / Current language
    11. Previous Programme / Swap

    RETURN

    MENU

    12. Electronic programme guide
    13. Info / Reveal (in TXT mode)
    14. Picture mode selection
    15. Source selection
    16. Red button / Zooms videos (in Media Browser
    video mode)
    17. Green button
    18. Yellow button
    19. Menu on-off
    20. Blue button
    21. OK / Edit Channel list / Hold (in TXT mode)

    29

    22. Cursor right / Subpage (in TXT mode)

    FAV

    LANG.

    SUBTITLE

    EPG

    /

    23. Cursor down / Page down (in TXT mode)

    28
    30

    24. Volume up
    25. Volume down

    31

    26. Mute
    27. Teletext / Mix
    28. Subtitle on-off (in DTV mode) / TXT Subtitle
    29. FAV (*) (Favourite Selection) (in DTV mode)
    30. No Function
    31. Media Browser playback buttons. (in DTV
    mode)
    (*) Only for EU country options.
    Note: Buttons that are not indicated with a
    number on the remote control illustration are
    not functional in TV mode.

    English - 48 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 48

    29.04.2011 15:20:45



  • Page 8

    LCD TV and Operating Buttons
    FRONT and REAR VIEW

    Control buttons VIEW

    Control Buttons
    1. Standby Off/On button
    2. TV/AV button
    3. Programme Up/Down buttonsVolume Up/Down buttons
    Note:You can use +/- buttons
    to change volume. If you want
    to change channels, press P/V/
    AV button once and then use
    +/- buttons. If you hold the P/V/
    AV button about a few seconds,
    source OSD will be displayed.
    Main menu OSD cannot be
    displayed via control buttons.

    P\V-AV

    Viewing the Back side Connections

    HDMI 1

    12V

    DC IN

    SPDIF
    Coax.OUT

    1. HDMI 1: HDMI Input
    HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of
    displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
    Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
    can accept either 720p or 1080p (Optional) signals. No sound connection is needed for an HDMI to
    HDMI connection.
    2. RF Input connects to an aerial antenna system.
    Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
    to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
    3. SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and
    SCART socket on your external device (such as a decoder, a VCR or a DVD player).
    Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
    Note: S-VHS signal is supported via the scart socket.
    4. PC Input is for connecting a personal computer to the TV set.
    Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
    Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.
    English - 49 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 49

    29.04.2011 15:20:47



  • Page 9

    WARNING: You cannot use PC and YPbPr at the same time.
    5. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
    Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
    V+

    V+

    6. DC 12 V Input is used for connecting the supplied power adaptor. V-

    V-

    .

    Viewing the Connections - Side Connectors
    1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that
    you subscribe to. For more information, see “Conditional Access” section.
    2. Side USB input.
    3. TV control buttons.
    4. Side audio-video connection input is used for connecting video and audio signals of
    external devices. To make a video connection, you must use the supplied AV connection
    cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV
    socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW
    input (located on the plural side) of the supplied AV connection cable. Colours of the
    connected jacks should match.

    5Vdc
    Max:500mA

    P\V-AV

    SIDE AV

    To enable audio connection, you must use RED and WHITE inputs of the side AV
    connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED
    and WHITE jack of the supplied side AV connection cable. Colours of the connected
    jacks should match.

    USB

    Note: You should use audio inputs of side AV connection cable (RED & WHITE)
    to enable sound connection when connecting a device to your TV by using PC or
    COMPONENT VIDEO input.
    5. Headphone jack is used for connecting an external headphone to the system. Connect to the
    HEADPHONE jack to listen to the TV from headphones (optional).

    Power Connection
    IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives
    12 V voltage. Connect this adaptor to a system that supplies 110-240V AC,50/60Hz.
    • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
    mains.

    12V
    HDMI 1

    To POWER
    INPUT DC 12 V
    terminal

    DC IN

    SPDIF
    Coax.OUT

    AC adapter

    English - 50 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 50

    29.04.2011 15:20:49



  • Page 10

    Using Digital Multimedia
    Connectors

    Using Side AV Connectors

    • It is possible that certain types of USB devices (e.g.
    MP3 Players) may not be compatible with this TV.
    • You may back up your files before making any
    connections to the TV set in order to avoid any
    possible data loss. Note that manufacturer will not
    be responsible for any file damage or data loss.
    • Do not pull out USB module while playing a file.
    CAUTION: Quickly plugging and unplugging USB
    devices, is a very hazardous operation. Especially,
    do not repeatedly quickly plug and unplug the
    drive. This may cause physical damage to the USB
    player and especially the USB device itself.
    SIDE VIEW

    • For connecting a camcorder or camera , you should
    use AV socket (side). To do this, you must use the
    supplied video/audio connection cable. First, plug
    single jack of the cable to the TV’s AV IN socket
    (side). Afterwards, insert your camera cable’s (not
    supplied) connectors into the plural part of the video/
    audio connection cable. Colours of the connected
    jacks should match. See illustration below.
    • Afterwards, you should switch to Side AV source. See
    the section Input selection in the following sections
    for more information.
    AV Connection
    Cable (supplied)

    AV Cable
    (not supplied)

    SIDE AV

    • You can connect USB devices to your TV by using
    the USB input of the TV. This feature allows you to
    display/play JPG, MP3 and video files stored in a
    USB stick.

    You can connect a range of optional equipment to your
    LCD TV using side connectors of the TV.

    USB MEMORY

    Camera

    Headphone

    USB

    • To listen the TV sound from headphones, you
    should connect headphones to your TV by using the
    HEADPHONE jack as illustrated above.

    5Vdc
    Max:500mA

    Connecting to a DVD Player via HDMI

    USB Memory Connection
    IMPORTANT: The TV should be switched off while
    plugging or unplugging a USB device. Plug your
    USB devices to the USB input of the TV. You can
    connect a usb device to your TV by using the USB
    input of the TV.

    Please refer to your DVD player’s instruction book
    for additional information. Power off both the TV and
    the device before making any connections.

    Note: It is possible certain types of hard disk drives
    are not supported.

    • If your DVD player has an HDMI socket, you can
    connect via HDMI for better video and audio quality.

    Note: Not all cables shown in the illustration are
    supplied.

    Connecting the LCD TV to a PC

    PC VGA Cable
    (Not supplied)

    PC Input
    (back)

    Or

    SIDE AV

    Side Audio/Video
    Connection Cable
    (Supplied)

    Side AV Input

    12V
    HDMI 1

    For displaying your computer’s screen image on your
    LCD TV, you can connect your computer to the TV set.
    Power off both computer and display before making
    any connections. Use 15-pin D-sub display cable to
    connect a PC to the LCD TV. When the connection
    is made, switch to PC source. See “Input selection”
    section. Set the resolution that suits your viewing
    requirements. Resolution information can be found
    in the appendix parts.

    DC IN

    SPDIF

    HDMI Cable
    (not supplied)

    Coax.OUT

    External device

    • When you connect to DVD player as illustrated above,
    switch to the connected HDMI source. See, Input
    Selection section for more information on changing
    sources.

    PC Audio Cable
    (Not supplied)

    English - 51 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 51

    29.04.2011 15:20:51



  • Page 11

    Connecting to a DVD Player
    via Component Sockets
    (YPbPr) or Scart Cable
    • Some DVD players are connected through
    COMPONENT SOCKETS (YPbPr). YPbPr can be
    used only when you connect a device that has a
    YPbPr output through the PC input with YPbPr to
    PC cable (YPbPr cable is not supplied).

    Remote Control Handset
    Inserting Batteries
    • Remove the battery cover located on the back of
    the handset by gently pulling backwards from the
    indicated part.
    • Insert two AAA/R3 or equivalent type batteries
    inside. Observe the correct polarity (+/-) when
    inserting batteries and replace the battery cover.

    • When the connection is made, switch to YPbPr
    source. See, “Input selection” section.
    • To enable audio connection, use the VGA/
    Component Audio cable. First, plug single jack
    of the cable to the TV. Afterwards, insert your DVD
    player’s audio cable’s connectors into the plural part
    of the VGA/Component audio connection cable
    (see illustration below). Colours of the connected
    jacks should match ( RED & WHITE).
    Note: Remove the battery from remote control
    handset when it is not to be used for a long period.
    Otherwise it can be damaged due to any leakage of
    batteries. Remote range is approximately 7m/23ft.

    Audio Cable
    (not supplied)

    SIDE AV

    AV Connection
    Cable (supplied)

    To DVD Player's
    Audio Outputs.

    • When the connection is made, switch to YPbPr source.
    See, Input selection section.
    • You may also connect through the SCART input.
    HDMI 1

    12V

    Switching On/Off
    To Switch the TV On
    • Connect the power cord to the 110-240V AC, 50/60
    Hz. Then the standby LED lights up.(The led will
    blink during the standby On/Off)
    • To switch on the TV from standby mode either:

    DC IN

    SPDIF

    • Press the “ ” button, P+ / P- or a numeric button
    on the remote control.

    Coax.OUT

    • Press the “ ” button, - or + button on the TV. The
    TV will then switch on.
    Note: If you switch on your TV via PROGRAMME
    UP/DOWN buttons on the remote control or on the
    TV set, the programme that you were watching last
    will be reselected.
    By either method the TV will switch on.

    Scart Cable
    (not supplied)

    To Switch the TV Off
    • Press the “ ” button on the remote control or press
    the “ ” switch on the TV, so the TV will switch to
    standby mode.
    • To power down the TV completely, unplug the
    power cord from the mains socket.

    External device

    • Note: These three methods of connection perform the
    same function but in different levels of quality. It is not
    necessary to connect by all three methods.

    Note: When the TV is switched to standby mode,
    standby LED can blink to indicate that features such
    as Standby Search, Over Air Download or Timer is
    active.

    English - 52 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 52

    29.04.2011 15:20:52



  • Page 12

    Volume Setting

    Input Selection
    Once you have connected external systems to
    your TV, you can switch to different input sources.
    Press “SOURCE” button on your remote control
    consecutively for directly changing sources.

    • Press “V+” button to increase the volume. Press “V-”
    button to decrease the volume. A volume level scale
    (slider) will be displayed on the screen.

    Programme Selection (Previous or Next
    Programme)
    • Press “ P-” button to select the previous
    programme.
    • Press “P+” button to select the next programme.

    Programme Selection (Direct Access)
    • Press numeric buttons on the remote control to select
    programmes between 0 and 9. The TV will switch
    to the selected programme. To select programmes
    between, press the numeric buttons consecutively.
    When the pressing time is due for the second
    numeric button, only the first digit programme will
    be displayed. Press directly the programme number
    to reselect single digit programmes.

    Note: YPbPr mode can be used only when you
    connect a device that has a YPbPr output through the
    PC input with YPbPr to PC cable (not supplied).

    Basic Operations
    You can operate your TV using both the remote
    control and onset buttons.

    Operation with the Buttons on the TV
    Main menu OSD cannot be displayed via control
    buttons. “+/-” buttons will function as volume up/down
    as default. Even if you set other functions for these
    buttons, “+/-” buttons will perform as default after a
    short while.

    Volume Setting

    Viewing Electronic Programme
    Guide (EPG)
    You can view the electronic programme guide (EPG)
    to view information about available programmes.To
    view the EPG menu please press EPG button on the
    remote control.
    • Press “ ”/“ ” buttons to navigate through channels.
    • Press “ ”/“ ” buttons to navigate through the
    programme list.
    • EPG menu displays available information on all
    channels.
    • Please note that event information is updated
    automatically. If there are no event information
    data available for channels, EPG will be displayed
    with blanks.

    • Press “P/V/AV” button once and then use “+/-”
    buttons to increase or decrease volume, so a volume
    level scale (slider) will be displayed on the screen.
    While Tv is on, +/- button can use as volume + or
    volume - as default.

    Programme Selection
    • Press “P/V/AV” button once and then use “+/-” buttons
    to change channel. By pressing “+/-” button,you can
    select the next or previous programme.

    AV Mode
    • Hold the “P/V/AV” button, source OSD will be displayed
    in a few second.

    Operation with the Remote Control
    • The remote control of your TV is designed to control
    all the functions of the model you selected. The
    functions will be described in accordance with the
    menu system of your TV.

    OK (Options): Displays programme options including
    “Select Channel” option.
    INFO (Event Details): Displays the programmes in
    detail.
    Green button: Programme schedule will be listed
    Yellow button: Display EPG data in accordane with
    timeline schedule

    English - 53 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 53

    29.04.2011 15:20:53



  • Page 13

    Blue button (Filter): Views filtering options.

    programme guide database in accordance with the
    genre. Info available in the programme guide will
    be searched and results matching your criteria will
    be listed.
    (Now) : Shows the current programme.

    First Time Installation
    IMPORTANT: Ensure that the aerial is connected
    before switching on the TV for the first time
    installation.

    Red button (Prev Time Slice): Displays the
    programmes of previous time slice.

    • When the TV is operated for the first time, installation
    wizard will guide you through the process. First,
    language selection screen will be displayed:

    Green button (Next Time Slice): Displays the
    programmes of the next time slice.
    Yellow button (Prev Day): Displays the programmes
    of previous day.
    Blue button (Next day): Displays the programmes
    of the next day.
    Numeric buttons (Jump): Jumps to the preferred
    channel directly via numeric buttons.
    OK (Options): Displays programme options including
    “Select Channel” option.
    Text button (Filter): Views filtering options.
    INFO (Details): Displays the programmes in detail.

    • Use “ ” or “ ” buttons to select your language
    and press OK button to set selected language and
    continue.
    • After selecting the language, “Welcome!” screen will
    be displayed, requiring you to set Country,Teletext
    Language and Scan Encrypted options.

    Red button (Prev Day): Displays the programmes
    of previous day.
    Green button (Next day): Displays the programmes
    of the next day.
    Yellow button (Zoom): Expands programme
    information.
    Blue button (Filter): Views filtering options.
    INFO (Details): Displays the programmes in detail.
    Numeric buttons (Jump): Jumps to the preferred
    channel directly via numeric buttons.
    OK (Options): Displays programme options including
    “Select Channel” option.
    Text (Search): Displays “Guide Search” menu.
    SUBTTL: Press SUBTITLE button to view Select
    Genre menu. Using this feature, you can search the

    • By pressing “ ” or “ ” button, select the country
    you want to set and press “ ” button to highlight
    Teletext Language option. Use “ ” or “ ” button
    to select desired Teletext Language.
    • Press “ ” button after setting Teletext Language
    option. Scan Encrypted will be then highlighted.
    You can set Scan Encrypted as Yes if you want to
    scan coded stations.Afterwards select the desired
    Teletext Language.
    • Press OK button on the remote control to continue
    and the following message will be displayed on the
    screen:

    English - 54 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 54

    29.04.2011 15:20:53



  • Page 14

    Select Automatic Channel Scan (Retune) by using
    “ ”/“ ” button and press OK button. Automatic
    Channel Scan (Retune) options will be displayed. You
    can select Digital Aerial, Analogue or Digital AerialAnalogue tuning using “ ”/“ ” and OK buttons.

    Automatic Channel Scan (Retune) Menu
    Operation
    To select the “Yes” or “No” option, highlight the item by
    using “ ” or “ ” buttons and press OK button.

    Digital: Searches and stores aerial DVB stations.

    Afterwards, the following OSD will be displayed on the
    screen and the digital television will search for digital
    terrestrial TV broadcasts

    Full: Searches and stores both analogue and aerial
    DVB stations.

    Analogue: Searches and stores analogue stations.

    • Whenever you select an automatic search type and
    press OK button, a confirmation screen will appear
    on the screen. To start installation process, select
    Yes, to cancel select No by using .“ ” or “ ” and
    OK button.
    • After auto channel scan type is set and selected
    and confirmed, installation process will start and
    progress bar will move along. Press “MENU” button
    to cancel process. In such a case, located channels
    are not stored.

    Note: You can press “MENU” button to cancel.
    • After all the available stations are stored, Channel
    List will be displayed on the screen. If you like the
    sort channels, according to the LCN,please select
    “Yes” and than press “OK”.

    Manual Tuning
    HINT: This feature can be used for direct broadcast
    entry.
    • Select Manual Channel Scan from the Installation
    menu by using “ ”/“ ” and OK buttons. Manual
    Scan options screen will be displayed.
    • Select the desired Search Type using “ ” or “
    ” button. Manual search options will change
    accordingly. Use “ ”/“ ” button to highlight an item
    and then press “ ” or “ ” button to set an option.
    You can press “MENU” button to cancel.

    Digital Manual Search

    • Press OK button to quit channel list and watch TV.

    Installation
    Press “MENU” button on the remote control and
    select Installation by using “ ” or “ ” button. Press
    OK button and the following menu screen will be
    displayed.
    In manual channel scan, the number of the multiplex
    or frequency are entered manually and only that
    multiplex or frequency are searched for the channels.
    After selecting search type as Digital, you can enter
    the multiplex or frequency number using the numeric
    buttons and press OK button to search.

    English - 55 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 55

    29.04.2011 15:20:54



  • Page 15

    Analogue Manual Search

    Select Edit Channel List to manage all stored
    channels. Use “ ” or “ ” and OK buttons to select
    Edit Channel List.
    After selecting search type as analogue, you can use
    “ ”/“ ” button to highlight an item and then press “
    ” or “ ” button to set an option.

    Operating the Channel List

    Enter the channel number or frequency using the
    numeric buttons. You can then press OK button
    to search. When the channel is located, any new
    channels that are not on the list will be stored.

    Analogue Fine Tune
    • Select Analogue Fine Tune from the Installation
    menu by using “ ” or “ ” and OK buttons. Analogue
    fine tune screen will be displayed. Analogue Fine
    Tune feature will not be available if there are no
    analogue channels, digital channels and external
    sources stored.

    • Press “ ” or “ ” button to select the channel that
    will be processed. Press “ ” or “ ” button to select
    a function on Channel List menu.

    • Press OK button to proceed. Use “ ” or “ ” button
    to set Fine Tune. When finished, press OK button
    again.

    • Use P+/P- buttons to move page up or down.

    Clear Service List (*)

    • Press “MENU” button to exit.

    (*) This setting is visible only when the Country option
    is set to Denmark, Sweden, Norway or Finland.
    Use this setting to clear channels stored. Press “ ” or
    “ ” button to select Clear Service List and then press
    OK. The following OSD message will be displayed
    on the screen:

    • Press BLUE button to view filtering options.

    Moving a Channel
    • First select the desired channel. Select Move option
    in the channel list and press OK button.
    • Edit Number screen will be displayed. Enter the
    desired channel number by using the numeric
    buttons on the remote control. If there is a previously
    stored channel on that number, a warning screen
    will be displayed. Select Yes if you want to move the
    channel and press OK.
    • Press OK button to process. Selected channel is
    now moved.

    Deleting a Channel
    Press OK to cancel. Select Yes by pressing “ ” or “ ”
    button and press OK to delete all of the channels.

    You can press GREEN button to tag/untag all
    channels; YELLOW button to tag/untag channel.

    Managing Stations: Channel List

    • Select the channel that you want to delete and select
    Delete option. Press OK button to continue.

    The TV sorts all stored stations in the Channel List.
    You can edit this channel list, set favourites or set
    active stations to be listed by using the Channel List
    options.

    • A warning screen will appear. Select YES to delete,
    select No to cancel. Press OK button to continue.

    • Press “MENU” button to view main menu. Select
    Channel List item by using “ ” or “ ” button. Press
    OK to view menu contents.

    • Select the channel that you want to rename and
    select Edit Name option. Press OK button to
    continue.

    Renaming a Channel

    English - 56 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 56

    29.04.2011 15:20:56



  • Page 16

    • Pressing “ ” or “ ” button moves to the previous/
    next character. Pressing “ ” or “ ” button toggles
    the current character, i.e., ‘b’ character becomes ‘a’
    by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
    ‘0...9’ replaces the highlighted character with the
    characters printed above the button one by one as
    the button is pressed.

    • BLUE: Displays filtering options.

    • When finished, press OK button to save. Press
    “MENU” to cancel.

    You can select broadcasts to be listed in the channel
    list. To display specific types of broadcast, you should
    use Active channel list setting.

    Locking a Channel
    You can press GREEN button to tag/untag all
    channels; YELLOW button to tag/untag a single
    channel.

    • YELLOW: Tag/untag a channel.
    • GREEN: Tag/untag all channels.

    Managing Stations: Sorting
    Channel List

    Select Active channel list from the Channel list
    menu by using “ ” or “ ” button. Press OK button
    to continue.

    • Select the channel that you want to lock and select
    Lock option. Press OK button to continue.
    • You will be asked to enter parental control PIN.
    Default PIN is set as 0000. Enter the PIN number.

    • Press OK button when the desired channel is
    highlighted to lock/unlock the channel. Lock symbol
    will be displayed next to the selected channel.

    Managing Stations: Favourites
    You can create a list of favourite programmes.
    • Press “MENU” button to view main menu. Select
    Channel List item by using “ ” or “ ” button. Press
    OK to view menu contents.

    You can select a broadcast type option from the list
    by using “ ” /“ ” and OK buttons.

    On-Screen Information
    You can press “INFO” button to display on-screen
    information. Details of the station and current
    programme will be displayed on the information
    banner.

    • Select Favourites to manage favourite list. Use “
    ”/“ ” and OK buttons to select Favourites.
    • You can set various channels as favourites so that
    only the favourite channels are navigated.

    The information banner gives information on the
    channel selected and the programmes on it. The
    name of the channel is displayed, along with its
    channel list number. Hint: Not all channels broadcast
    the programme data. If the name and time of the
    programme are not available, then information banner
    will be displayed with blanks.
    If the selected channel is locked, you must enter the
    correct four-digit numeric code to view the channel
    (default code is 0000). “Enter PIN” will be displayed
    on the screen in such a case:

    • Select a channel by using “ ” or “ ” button. Press
    OK button to add selected channel to favourites list.
    Press OK button again to remove.

    Button Functions
    • OK: Add/remove a station.
    English - 57 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 57

    29.04.2011 15:20:57



  • Page 17

    Lang (Play Preview): Displays selected file in a small
    preview screen.

    Media Playback Using Media
    Browser

    INFO: Changes filter options.

    If the USB stick is not recognized after power off/on
    or First Time Installation, first, plug the USB device
    out and power off/on the TV set. Plug the USB device
    in again.

    FAV: Sorts files by name.
    The following menu will be displayed while playing
    a video file:

    To display Media Browser window, press either
    “MENU” button on the remote control and then select
    Media Browser by pressing “ ” or “ ” button. Press
    OK button to continue. Media Browser menu options
    will be displayed.
    Also, when you plug USB devices, media browser
    screen will be displayed automatically:

    Play (

    button): Starts the video playback.

    Stop (

    button): Stops the video playback.

    Pause (

    button): Pause the video playback.

    Rewind (

    button): Goes backward.

    Forward (

    button): Goes forward.

    Subtitle/Audio (LANG. button): Sets subtitle/Audio.
    Yellow: Opens subtitle time correction menu

    You can play music, picture and video files from the
    connected USB memory stick. Use “ ” or “ ” button
    to select Videos, Photos, Music or Settings.
    Viewing Videos via USB

    Press RETURN button to switch back to previous
    menu.

    Viewing Photos via USB
    When you select Photos from the main options,
    available image files will be filtered and listed on this
    screen.

    When you select Videos from the main options,
    available video files will be filtered and listed on this
    screen. You can use “ ” or “ ” button to select a video
    file and press OK button to play a video. If you select
    a subtitle file and press OK button, you can select or
    deselect that subtitle file.
    Jump (Numeric buttons):The TV will jump to the
    file starting with the letter you input via the numeric
    buttons on your remote control.

    Jump (Numeric buttons): Jump to selected file using
    the numeric buttons.
    OK: Views the selected picture in full screen.
    button): Starts the slideshow using

    Play This (OK button) : Plays the selected file.

    Slideshow (
    all images.

    Play ( button) : Plays all media files starting with
    the selected one.

    Loop/Shuffle (GREEN button): Press once to enable
    Loop. Press again to enable both Loop and Shuffle.

    English - 58 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 58

    29.04.2011 15:20:58



  • Page 18

    Press once more to enable only Shuffle. Press again
    to disable all. You can follow the disabled functions
    with the change of the icons.

    Play This (OK button): Plays the selected file.
    Play ( button): Plays all media files starting with
    the selected one.

    RED: Sorts files by date.

    Stop (

    GREEN: Views images in thumbnails.

    Pause (

    INFO: Changes filter options.
    BLUE: Switch between music,photo,video and all

    Previous/Next (Left/Right buttons): Jumps to
    previous or next file to play.

    YELLOW: Change view style

    FAV: Sorts files by Title,Artist or Album.

    Slideshow Options

    Note: If the Viewing Style is set to Folder in Media
    Browser Settings, Music folder will be displayed as
    sorted and there is no need to sort files again by
    pressing FAV button.

    button): Stops playback.
    button): Pauses the selected playback.

    INFO: Changes filter options.
    Pause (

    button): Pauses the slideshow.

    Continue (

    button): Continues the slideshow.

    Zoom (RED button): Zooms picture.
    Note:If a picture is zoomed out/displayed in full
    screen, you cannot navigate the picture by using Up/
    Down/Left/Right buttons.

    Loop/Shuffle (Blue button): Press once to disable
    Loop. Press again to disable both Loop and Shuffle.
    Press once more to enable only Shuffle. Press again
    to enable all. You can follow the disabled functions
    with the change of the icons.

    Media Browser Settings

    Previous/Next (Left/Right buttons): Jumps to
    previous or next file on slideshow.
    Rotate (Up/Down buttons): Rotates the image using
    up/down buttons.
    Loop/Shuffle (GREEN button): Press once to disable
    Loop. Press again to disable both Loop and Shuffle.
    Press once more to enable only Shuffle. Press again
    to enable all. You can follow the disabled functions
    with the change of the icons.
    RETURN: Back to file list.

    You can set your Media Browser preferences by
    using the Settings dialog. Press “ ” or “ ” button to
    highlight an item and use “ ” or “ ” button to set.

    INFO: Displays help screen.
    Viewing Music via USB
    When you select Music from the main options,
    available audio files will be filtered and listed on this
    screen.

    View Style: Sets default browsing mode.
    Slide Show Interval: Sets slide show interval time.
    Show Subtitle: Sets subtitle enabling preference.
    Subtitle Language: Sets supported subtitle
    language.
    Subtitle Position: Sets subtitle position as up or
    down.
    Subtitle Font Size: Sets subtitle font size (max.
    54pt).

    Changing Image Size: Picture
    Formats
    0..9 (Numeric buttons):The TV will jump to the
    file starting with the letter you input via the numeric
    buttons on your remote control.

    • You can change the aspect ratio (image size) of
    the TV for viewing the picture in different zoom
    modes.
    • Press “SCREEN” button repeatedly to change
    the image size. Available zoom modes are listed
    below.

    English - 59 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 59

    29.04.2011 15:20:59



  • Page 19

    Auto

    14:9 Zoom

    When AUTO is selected, the aspect ratio of the screen
    is adjusted by the information provided by the selected
    source(if available).
    The format being displayed in AUTO mode is
    completely independent of WSS information which
    could be included in the broadcast signal or the signal
    from an external device.
    Note: Auto mode only will be available in HDMI, YPbPr
    and DTV sources.

    This option zooms to the 14:9 picture.

    16:9

    4:3

    This uniformly stretches the left and right sides of a
    normal picture (4:3 aspect ratio) to fill the wide TV
    screen.

    Use to view a normal picture (4:3 aspect ratio) as this
    is its original size.

    Panoramic
    • For 16:9 aspect ratio pictures that have been
    squeezed into a normal picture (4:3 aspect ratio),
    use the 16:9 mode to restore the picture to its
    original shape.

    This stretches the left and right sides of a normal
    picture (4:3 aspect ratio) to fill the screen, without
    making the picture appear unnatural.

    Subtitle
    This zooms up the wide picture (16:9 aspect ratio)
    with subtitles to the full screen.

    The top and bottom of the picture are slightly cut off.

    Cinema
    Note: You can shift to screen up or down by pressing
    “ ” / “ ” buttons while picture zoom is selected as
    panaromic, 14:9 Zoom, Cinema or Subtitle.

    This zooms up the wide picture (16:9 aspect ratio) to
    the full screen.

    14:9
    This zooms up the wide picture (14:9 aspect ratio) to
    the upper and lower limits of the screen.

    Configuring Picture Settings
    You can use different picture settings in detail.
    Press “MENU” button and select the Picture icon
    by using “ ” or “ ” button. Press OK button to view
    Picture Settings menu.
    English - 60 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 60

    29.04.2011 15:21:00



  • Page 20

    Reset: Resets the picture settings to factory default
    settings.
    While in VGA (PC) mode, some items in Picture menu
    will be unavailable. Instead, VGA mode settings will be
    added to the Picture Settings while in PC mode.

    PC Picture Settings
    For adjusting PC picture items, do the following:
    Press “ ” or “ ” button to select Picture icon. Picture
    menu appears on the screen.
    Contrast, Brightness, Colour, Colour Temp and
    Picture Zoom settings in this menu are identical
    to settings defined in TV picture menu under “Main
    Menu System”.
    Sound,Settings and Source settings are identical to the
    settings explained in main menu system.

    Operating Picture Settings Menu Items
    • Press “ ” or “ ” button to highlight a menu item.

    PC Position: Select this to display PC position menu
    items.

    • Use “ ” or “ ” button to set an item.
    • Press “MENU” button to exit.

    Picture Settings Menu Items
    Mode: For your viewing requirements, you can set
    the related mode option. Picture mode can be set
    to one of these options: Cinema,Game,Dynamic
    and Natural.
    Contrast: Sets the lightness and darkness values
    of the screen.
    Brightness: Sets the brightness value for the
    screen.
    Sharpness: Sets the sharpness value for the objects
    displayed on the screen.
    Colour: Sets the colour value, adjusting the colors.
    Colour Shift: Adjust the desired colour tone.
    Colour Temp: Sets the desired colour tone.
    Setting Cool option gives white colours a slight blue
    stress.
    For normal colours, select Normal option.
    Setting Warm option gives white colours a slight red
    stress.
    Noise Reduction: If the broadcast signal is weak and
    the picture is noisy, use Noise Reduction setting to
    reduce the noise amount. Noise Reduction can be set
    to one of these options: Low, Medium, High or Off.

    Autoposition: Automatically optimizes the display.
    Press OK to optimize.
    H Position: This item shifts the image horizontally to
    right hand side or left hand side of the screen.
    V Position: This item shifts the image vertically
    towards the top or bottom of the screen.
    Dot Clock: Dot Clock adjustments correct the
    interference that appear as vertical banding in
    dot intensive presentations like spreadsheets or
    paragraphs or text in smaller fonts.
    Phase: Depending on the resolution and scan
    frequency that you input to the TV set, you may see
    a hazy or noisy picture on the screen. In such a case
    you can use this item to get a clear picture by trial
    and error method.

    Game Mode: When Game Mode is set to On, specific
    game mode settings, which are optimized for better
    video quality, will be loaded.
    Note: When Game Mode is on, some items in the
    Picture Settings menu will be unavailable to be set.
    Picture Zoom:Sets the picture size to Auto,16:9,
    Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.
    English - 61 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 61

    29.04.2011 15:21:01



  • Page 21

    Configuring Sound Settings
    Sound settings can be configured according to your
    personal preferences.
    Press “MENU” button and select the first icon by
    using “ ” or “ ” button. Press OK button to view
    Sound Settings menu.

    AVL: Automatic Volume Limiting (AVL) function sets the
    sound to obtain fixed output level between programmes
    (For instance, volume level of advertisements tend to
    be louder than programmes).
    Dynamic Bass: Dynamic Bass is used to increase
    bass effect of the TV set.
    Digital Out: Sets digital out audio type.

    Configuring Your TV’s Settings
    Detailed settings can be configured to suit your
    personal preferences.
    Press “MENU” button and select Settings ikon by
    using “ ” or “ ” button. Press OK button to view
    Settings menu.

    Operating Sound Settings Menu Items
    • Press “ ” or “ ” button to highlight a menu item.
    • Use “ ” or “ ” button to set an item.
    • Press “MENU” button to exit.

    Sound Settings Menu Items

    Operating Settings Menu Items

    Volume: Adjusts volume level.
    Equalizer: Press OK button to view equalizer submenu.

    • Press “ ” or “ ” button to highlight a menu item.
    • Press OK button to select an item.
    • Press “MENU” button to exit.

    Settings Menu Items
    Conditional Access: Controls conditional access
    modules when available.
    Language: Configures language settings.
    Parental: Configures parental settings.
    Timers: Sets timers for selected programmes.
    Date/Time: Sets date and time.
    Sources: Enables or disables selected source
    options.
    In equalizer menu, the preset can be changed to
    Music, Movie, Speech, Flat, Classic and User.
    Press the “MENU” button to return to the previous
    menu.

    Other Settings: Displays other setting options of
    the TV set.

    Note: Equalizer menu settings can be changed
    manually only when the Equalizer Mode is in User.
    Balance: This setting is used for emphasizing left or
    right speaker balance.
    Headphone: Sets headphone volume.
    English - 62 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 62

    29.04.2011 15:21:02



  • Page 22

    Using a Conditional Access
    Module

    Configuring Language
    Preferences

    IMPORTANT: Insert or remove the CI module only
    when the TV is SWITCHED OFF.

    You can operate the TV’s language settings using
    this menu.

    • In order to watch certain digital channels, a conditional
    access module (CAM) can be necessary. This module
    must be inserted in the CI slot of your TV.

    Press “MENU” button and select the fifth icon by using
    “ ” or “ ” button. Press OK button to view Settings
    menu. Use “ ” or “ ” button to highlight Language
    and press OK to continue:

    • Obtain the Conditional Access Module (CAM) and
    the viewing card by subscribing to a pay channel
    company, then insert those to the TV using the
    following procedure.
    • Insert the CAM and then the viewing card to the
    slot that is located in the terminal cover at the rear
    side of the TV.
    • The CAM should be correctly inserted, it is
    impossible to insert fully if reversed. The CAM or
    the TV terminal may be damaged if the CAM is
    forcefully inserted.
    Connect the TV to the mains supply, switch on
    and then wait for few moments until the card is
    activated.
    • When no module is inserted, “ No Common
    Interface module detected” message appears on
    the screen.

    Use “ ” or “ ” button to set an item. Settings are
    stored automatically.

    • Refer to the module instruction manual for details
    of the settings.

    Preferred

    Viewing Conditional Access Menu (*)
    (*) These menu settings may change depending on
    the service provider.
    Press “MENU” button and select the icon by using
    “ ” or “ ” button. Press OK button to view Settings
    menu. Use “ ” or “ ” button to highlight Conditional
    Access and press OK to view menu items.

    Menu: displays the system language.
    These settings will be used if available. Otherwise the
    current settings will be used.
    • Audio: Sets the preferred audio language.
    • Subtitle : Sets the subtitle language. Selected
    language will be seen in subtitles.
    • Teletext: Sets teletext language.
    • Guide: Sets the preferred Guide language.

    Current (*)
    (*) These settings can be changed if only the
    broadcaster supports. Otherwise, settings will not be
    available to be changed.
    Audio: Changes the audio language for the current
    channel.
    • Subtitle: Sets the subtitle language for the current
    channel.
    Note: If the Country option is set to Denmark, Sweden,
    Norway or Finland, the Language Settings menu will
    function as described below:

    English - 63 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 63

    29.04.2011 15:21:03



  • Page 23

    Language Settings

    Parental Settings Menu Operation
    • Select an item by using “ ” or “ ” button.
    • Use “ ” or “ ” button to set an item.
    • Press OK button to view more options.

    In the configuration menu, highlight the Language
    Settings item by pressing “ ” or “ ” buttons. Press
    OK and Language Settings submenu will be displayed
    on the screen:
    Use “ ” or “ ” buttons to highlight the menu item
    that will be adjusted and then press “ ” or “ ” button
    to set.
    Notes:
    • System Language determines the on-screen menu
    language.
    • Audio Language is used for selecting the soundtrack
    of a channels.
    • Primary settings are the first priority when multiple
    choices are available on a broadcast. Secondary
    settings are the alternatives when the first options
    are not available.

    Parental Control
    To prohibit viewing of certain programmes, channels
    and menus can be locked by using the parental
    control system.
    This function enables or disables the menu protection
    system and allows the PIN code to be changed.
    Press “MENU” button and select the icon by using
    “ ” or “ ” button. Press OK button to view Settings
    menu. Use “ ” or “ ” button to highlight Parental
    and press OK to continue:

    Menu Lock: Menu lock setting enables or disables
    the menu access. You can disable access to the
    installation menu or the whole menu system.
    Maturity Lock (optional): When set, this option
    gets the maturity information from the broadcast and
    if this maturity level is disabled, disables access to
    the broadcast.
    Child Lock (optional): When Child Lock is set, the TV
    can only be controlled by the remote control. In this
    case the control panel buttons will not work, except
    for the Standby Off/On button. When Child Lock is
    activated you are able to switch the TV into Standby
    mode with the Standby Off/On button. To switch the
    TV on again, you need the remote control. Hence, if
    one of those buttons is pressed, Child Lock Is On
    will be displayed on the screen when the menu screen
    is not visible.
    Set PIN: Defines a new PIN number. Use numeric
    buttons to enter a new pin number. You will need
    to code your new pin a second time for verification
    purposes.
    IMPORTANT: The factory default pin number is 0000,
    if you change the pin number make sure you write it
    down and keep it safe.

    Timers
    To view Timers menu, press “MENU” button and
    select Channel List icon by using “ ” or “ ” button.
    Press OK button to view Channel List menu. Use “
    ” or “ ” button to highlight Timers and press OK
    to continue:

    Setting Sleep Timer
    This setting is used for setting the TV to turn off after
    a certain time.
    • Highlight Sleep Timer by using “ ” or “ ” button.
    To display parental lock menu options, PIN number
    should be entered. Factory default PIN number is
    0000. After coding the correct PIN number, parental
    settings menu will be displayed:

    • Use “ ” or “ ” button to set. The timer can be
    programmed between Off and 2.00 hours (120
    minutes) in steps of 30 minutes.

    English - 64 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 64

    29.04.2011 15:21:04



  • Page 24

    Setting Programme Timers
    You can set programme timers for a particular
    programme using this feature.
    Press “ ” button to set timers on an event. Programme
    timer function buttons will be displayed on the
    screen.

    Configuring Date/Time
    Settings
    Select Date/Time in the Settings menu to configure
    Date/Time settings. Press OK button.

    Adding a Timer
    • Press YELLOW button on the remote control to
    add a timer. The following menu appears on the
    screen:
    Channel: Changes network type by using “ ” or “ ”.
    Timer Type: This feature is unavailable to be set.
    Date: Enter a date using the numeric buttons.
    Start: Enter a starting time using the numeric
    buttons.
    End: Enter an ending time using the numeric
    buttons.
    Duration: Displays duration between the starting and
    ending time.
    Repeat: Sets a timer to be repeated as Once, Daily or
    Weekly. Use “ ” or “ ” buttons to select an option.
    • Press GREEN button to save the timer. Press RED
    button to cancel.
    Change/Delete:Controls parental settings on timers.

    Editing a Timer
    • Select the timer you want to edit by pressing “ ”
    or “ ” button.
    • Press GREEN button. Edit Timer menu screen will
    be displayed.
    • When finished with editing, press GREEN button to
    save. You can press “MENU” button to cancel.

    • Use “ ” or “ ” buttons to highlight Date/Time.
    Date,Time,Time Settings Mode and Time Zone Setting
    will be available.
    Use “ ” or “ ” buttons to highlight the Time Settings
    Mode. Time Settings Mode is set using “ ” or “ ”
    buttons. It can be set to AUTO or MANUAL.
    When AUTO is selected, Date/Time and Time Zone
    options will not be available to be set. If MANUAL option
    is selected as the Time Zone can be altered:
    • By pressing “ ” or “ ” buttons select Time Zone.
    Use “ ” or “ ” buttons to change the Time Zone
    between GMT-12 or GMT+12. Date/Time on the top of
    the menu list will then change according to the selected
    Time Zone.
    • Changes are automatically stored. Press “MENU”
    to exit.

    Deleting a Timer
    • Select the timer you want to delete by pressing “
    ” or “ ” button.
    • Press RED button.
    • Select YES by using “ ” or “ ” buttons to delete the
    timer. Select NO to cancel.

    English - 65 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 65

    29.04.2011 15:21:05



  • Page 25

    Configuring Source Settings
    You can enables or disable selected source options. The
    TV will not switch to the disabled source options when
    “SOURCE” button is pressed.

    it is set as Off, encrypted channels will not be located
    in automatic search or manual search.
    Backlight (optional): This setting controls the
    backlight level and it can be set to Auto,Maximum,
    Minimum, Medium and Eco Mode.
    Power Save Mode: Use “ ” or “ ” button to select
    Power Save Mode. Press “ ” or “ ” button to set
    Power Save Mode as On or Off. See the section,
    “Environmental Information” in this manual for further
    information on Power Save Mode.
    Note : Backlight function will be invisible if Power Save
    Mode is set to on.
    Blue Background: Activates or deactivates blue
    background system when the signal is weak or
    absent.
    Software Upgrade: To ensure that your TV always
    has the most update information, you can use this
    setting. In order for the proper operation, please
    ensure that the TV is set to standby mode.

    • Select Sources in the Settings menu and press OK
    button.
    • Press“ ” or “ ” buttons to select a source.
    • Use “ ” or “ ” button to enable or disable the
    selected source. Changes are automatically
    stored.
    Note: YPbPr mode can be used only when you
    connect a device that has a YPbPr output through the
    PC input with YPbPr to PC cable (not supplied).

    Configuring Other Settings
    To view general configuration preferences, select Other
    Settings in the Settings menu and press OK button.

    You can enable or disable automatic upgrade by
    setting Automatic Scanning option.
    You can manually search for new software by
    selecting Scan for upgrade.
    Hard of Hearing: If the broadcaster enables any
    special signal concerning the audio, you can set this
    setting as On to receive such signals.
    Audio Description: Audio description refers to
    an additional narration track for blind and visually
    impaired viewers of visual media, including television
    and movies. The description narrator talks through
    the presentation, describing what is happening on the
    screen during the natural pauses in the audio (and
    sometimes during dialogue, if deemed necessary).
    You can use this feature, only if the broadcaster
    supports that additional narration track.
    Auto TV Off: You can set the timeout value of auto off
    feature.After the timeout value is reached and the Tv is
    not operated for selected time , the TV will go off.

    Operation
    • Press “ ” or “ ” buttons to select an item.
    • Use “ ” or “ ” button to set an option.
    • Press OK button to view a sub-menu.
    Menu Timeout: Changes timeout duration for menu
    screens.

    Standby Search (optional)
    Use “ ” or “ ” button to select Standby Search and
    then press “ ” or “ ” button to set this setting as On or
    Off. If you change Standby Search to Off, this function
    will be unavailable.To use Standby search please
    make sure that you select Standby Search as On.

    If the Standby Search is set to On, when the TV is in
    standby mode, available broadcasts will be searched.
    Scan Encrypted: When this setting is on, search If the TV locates any new or missing broadcasts, a
    process will locate the encrypted channels as well. If menu screen will be displayed, asking you whether
    or not to execute these changes.
    English - 66 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 66

    29.04.2011 15:21:07



  • Page 26

    Other Features
    Displaying TV Information: Programme Number,
    Programme Name, Sound Indicator, time, teletext,
    channel type and resolution information is displayed
    on the screen when a new programme is entered or
    “INFO” button is pressed.
    Mute Function: Press “ ” button to disable sound.
    Mute indicator will be displayed in the upper side of
    the screen. To cancel mute, there are two alternatives;
    the first one is pressing the “ ” button and the second
    one is increasing the volume level.
    Picture Mode Selection: By pressing PRESETS
    button, you can change Picture Mode settings in
    accordance with your viewing requirements. Available
    options are Dynamic, Natural and Cinema.
    Displaying Subtitles: You can enable subtitles by
    pressing the SUBTITLE button of the remote control.
    Press SUBTITLE button again to disable subtitle
    function.

    Teletext
    Teletext system transmits information such as news,
    sports and weather on your TV. Note that is the signal
    degrades, for example in poor/adverse weather
    conditions, some text errors may occur or the teletext
    mode may be aborted.
    Teletext function buttons are listed below:
    ” Teletext / Mix : Activates teletext mode when

    pressed once. Press again to place the teletext screen
    over the programme (mix).Pressing again will quit the
    teletext mode.
    “RETURN” Index: Selects the teletext index page.
    “INFO” Reveal: Shows hidden information (e.g.
    solutions of games).
    “OK” Hold: Holds a text page when convenient. Press
    again to resume.
    “ ”/“ ” Subcode Pages : Selects subcode pages if
    available when the teletext is activated.
    P+ / P- and numbers (0-9): Press to select a page.
    Note: Most TV stations use code 100 for their index
    pages.

    Coloured Buttons (RED/GREEN/YELLOW/
    BLUE)
    Your TV supports both FASTEXT and TOP text
    systems. When these systems are available, the
    pages are divided into groups or topics. When
    FASTEXT system is available, sections in a teletext
    page will become colour-coded and can be selected
    by pressing the coloured buttons. Press a coloured
    button that corresponds to with your needs. The
    coloured writings will appear, showing you which
    coloured buttons to use when TOP text transmission

    is present. Pressing “ ” or “ ” commands will request
    the next or previous page respectively.

    Tips
    Screen Care: Clean the screen with a slightly damp,
    soft cloth. Do not use abrasive solvents as they may
    damage the coating layer of the TV screen. For your
    safety, unplug the mains plug when cleaning the
    set. When moving the TV, hold it properly from the
    bottom part.
    Image Persistence: Please note that ghosting may
    occur while displaying a persistent image.LCD TVs’
    image persistence may disappear after a short time.
    Try turning off the TV for a while.
    To avoid this, do not leave the screen in still picture
    for extended periods.
    No Power: If your TV system has no power, please
    check the main power cable and connection to the
    mains socket outlet.
    Poor Picture: Have you selected the correct TV
    system? Is your TV set or house aerial located too close
    to a non-earthed audio equipment or neon lights, etc.?
    Mountains or high buildings can cause double pictures
    or ghost images. Sometimes you can improve the
    picture quality by changing the direction of the aerial.
    Is the picture or teletext unrecognisable? Check if you
    have entered the correct frequency. Please retune the
    channels. The picture quality may degrade when two
    peripherals are connected to the TV at the same time.
    In such a case, disconnect one of the peripherals.
    No Picture: Is the aerial connected properly? Are the
    plugs connected tightly to the aerial socket? Is the
    aerial cable damaged? Are suitable plugs used to
    connect the aerial? If you are in doubt, consult your
    dealer. No Picture means that your TV is not receiving
    a transmission. Have you selected the correct button
    on the remote control? Try once more. Also make sure
    the correct input source has been selected.
    Sound: You can not hear any sound. Did you perhaps
    button? Sound is
    interrupt the sound, pressing the
    coming from only one of the speakers. Is the balance
    set to one extreme? See Sound Menu.
    Remote Control: Your TV no longer responds to the
    remote control. Perhaps the batteries are exhausted.
    If so you can still use the local buttons on the TV.
    Input Sources: If you cannot select an input source,
    it is possible that no device is connected. Check
    the AV cables and connections if you have tried to
    connect a device

    English - 67 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 67

    29.04.2011 15:21:08



  • Page 27

    Appendix A: PC Input Typical
    Display Modes

    Appendix B: AV and HDMI Signal
    Compatibility (Input Signal Types)

    The display has a maximum resolution of 1360 x 768.
    The following table is an illustration of some of the
    typical video display modes. Your TV may not support
    different resolutions. Supported resolution modes are
    listed below. If you switch your PC to an unsupported
    mode, a warning OSD will appear on the screen.
    Index

    Resolution

    Frequency

    1

    640x400

    70 Hz

    2

    640x480

    60 Hz

    3

    640x480

    75 Hz

    4

    800x600

    60 Hz

    5

    800x600

    75 Hz

    6

    1024x768

    60 Hz

    7

    1024x768

    70 Hz

    8

    1024x768

    75 Hz

    9

    1152x864

    75 Hz

    10

    1280x768

    60 Hz

    11

    1280x1024

    60 Hz

    12

    1360x768

    60 Hz

    Source

    Supported Signals

    Available

    PAL 50/60

    O

    EXT

    NTSC 60

    O

    (SCART)

    RGB 50

    O

    RGB 60

    O

    PAL 50/60

    O

    Side AV

    YPbPr

    HDMI

    NTSC 60

    O

    480I

    60Hz

    O

    480P

    60Hz

    O

    576I

    50Hz

    O

    576P

    50Hz

    O

    720P

    50Hz

    O

    720P

    60Hz

    O

    1080I

    50Hz

    O

    1080I

    60Hz

    O

    1080P

    50Hz

    O

    1080P

    60Hz

    O

    480I

    60Hz

    O

    480P

    60Hz

    O

    576I

    50Hz

    O

    576P

    50Hz

    O

    720P

    50Hz

    O

    720P

    60Hz

    O

    1080I

    50Hz

    O

    1080I

    60Hz

    O

    1080P

    50Hz

    O

    1080P

    60Hz

    O

    1080P

    24 HZ

    O

    (X: Not Available, O: Available)
    In some cases a signal on the LCD TV may not be displayed
    properly. The problem may be an inconsistency with standards
    from the source equipment (DVD, Set-top box, etc. ). If you
    do experience such a problem please contact your dealer and
    also the manufacturer of the source equipment.

    English - 68 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 68

    29.04.2011 15:21:09



  • Page 28

    Appendix C: Supported DVI Resolutions
    When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer
    to the following resolution information.
    24Hz

    25Hz

    30Hz

    50Hz

    480i

    60Hz
    ;

    480p

    ;

    576i

    ;

    576p

    ;

    720p

    ;

    1080i

    ;

    ;

    ;

    ;

    1080p

    ;

    ;

    ;

    ;

    Appendix D: Supported File Formats for USB Mode
    Supported Players
    Player

    Stream

    Video Decoder (MSVD)

    Audio Decoder (MSAD)

    Audio

    MP3

    None

    MP3

    Audio

    WAV/AIFF

    None--

    LPCM

    MPEG1 Program
    Stream

    MPEG-1

    MPEG1

    MP3, AC-3 and PCM

    MPEG2 Program
    Stream

    MPEG-2

    MPEG2

    MP3, AC-3 and PCM

    AVI (Xvid)

    XVID

    MPEG2

    MP3, AC-3 and PCM

    English - 69 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 69

    29.04.2011 15:21:09



  • Page 29

    Appendix E: Software Upgrade
    • Your TV is capable of finding and updating new software upgrades over broadcast channels.
    • For broadcast channels search, TV looks the available channels stored in your settings. So before software
    upgrade search, it is advised to auto search and update all available channels.

    1) Software upgrade search via user interface
    • It is possible manually to check if there is a new software upgrade for your TV set.
    • Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings
    menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.
    • In Upgrade Options menu select Scan for upgrade and press OK button.
    • If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download
    progress. When download completes with success a message is displayed for reboot to activate new software.
    Press OK to continue with the reboot operation.

    2) 3.AM search and upgrade mode
    • If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast
    channels for new software upgrade. If new software is found and downloaded successfully, with next power
    up TV opens with new software version.
    Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is
    finished successfully. During reboot TV makes final initializations. In reboot sequence panel power is closed and
    front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.
    • If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with
    new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few
    times more. If your set still can not operate, please call the service personnel to fix the problem for you.
    Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause
    your TV not to re-open again and can only be fixed by service personnel.

    Information for Users on Disposal of old Equipment and
    Batteries
    [European Union only]

    Battery
    Products

    These symbols indicate that equipment with these symbols should not
    be disposed of as general household waste. If you want to dispose
    of the product or battery, please consider the collection systems or
    facilities for appropriate recycling.
    Notice: The sign Pb below the symbol for batteries indicates that this
    battery contains lead.

    English - 70 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 70

    29.04.2011 15:21:09



  • Page 30

    Specifications
    TV BROADCASTING
    PAL/SECAM B/G D/K K’ I/I’ L/L’
    RECEIVING CHANNELS
    VHF (BAND I/III)
    UHF (BAND U)
    HYPERBAND
    NUMBER OF PRESET CHANNELS
    1000
    CHANNEL INDICATOR
    On Screen Display
    RF AERIAL INPUT
    75 Ohm (unbalanced)
    OPERATING VOLTAGE
    110-240V AC, 50/60 Hz.
    AUDIO
    German + Nicam Stereo
    AUDIO OUTPUT POWER (WRMS.) (10% THD)
    2 x 2,5
    POWER CONSUMPTION (W)
    47 W (max)
    < 1 W (Standby)
    PANEL
    19” Screen Size
    DIMENSIONS (mm)
    DxLxH (With foot): 134 x 468 x 341
    Weight (Kg): 4,75
    DxLxH (Without foot): 53 x 468 x 307
    Weight (Kg): 4,50

    MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1
    Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile

    for UK

    Frequency range: 474-850 MHz for UK models
    Digital
    Reception

    170-862 MHz for EU models
    Transmission standard: DVB-T. MPEG-2
    Demodulation: COFDM with 2K/8K FFT mode
    FEC: all DVB modes
    Video: MP@ML, PAL, 4:3/16:9
    Audio: MPEG Layer I&II 32/44.148kHz.
    English - 71 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 71

    29.04.2011 15:21:09



  • Page 31

    MOBIL TV INSTRUCTION MANUAL
    Switching the TV On Using 12 Volt
    1. Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to
    the battery of car, making sure to observe the correct polarity.
    2. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights
    up.
    3. Press the “ ” button, P+ / P- or a numeric button on the remote control or press the “
    button on the TV. The TV will then switch on.

    ” button, - or +

    4. Adjust for best picture through antenna position or set TV channels again if necessary.
    Switching the TV Off
    1. Press the “ ” button on the remote control or press the “
    standby mode.

    ” switch on the TV, so the TV will switch to

    2. Unplug cable connectors and power plugs.

    ATTENTION: 12 V Input :

    V+

    V+

    V-

    V-

    English - 72 -

    A02_MB60_[GB]_(01-TV)_woypbpr_1900UK_IDTV_BRONZE17_MOBİL_19912WLED_10071656_50182410.indd 72

    29.04.2011 15:21:09



  • Page 32

    Features

    Contents
    Features ............................................................... 73
    General Properties............................................ 73
    Safety Information ................................................ 74
    Notes on Discs ..................................................... 74
    On handling discs ............................................. 74
    On cleaning....................................................... 74
    Licence Notification .............................................. 74
    How to Watch a DVD ............................................ 74
    DVD Control Panel Buttons .................................. 75
    Overview of the Remote Control .......................... 75
    General Operation ................................................ 76
    General Playback ................................................. 77
    Basic Play ......................................................... 77
    For your reference: ....................................... 77
    Notes on Playback: ........................................... 77
    Setup Menu Items ................................................ 77
    Vıdeo Setup Page............................................. 77
    TV Type......................................................... 77
    DivX VOD ..................................................... 77
    Language Setup ............................................... 77
    OSD LANG ................................................... 77
    AUDIO .......................................................... 77
    DISC MENU .................................................. 77
    SUBTITLE ..................................................... 77
    Preferences ...................................................... 78
    DEFAULT ...................................................... 78
    DOWNMIX .................................................... 78
    PASSWORD (Change Password): ............... 78
    SPDIF OUTPUT............................................ 78
    Troubleshooting .................................................... 78
    The picture quality is poor (DVD)...................... 78
    Disc does not play ............................................ 78
    Wrong OSD language....................................... 78
    Some functions (Angle, Zoom etc) do not work 79
    No picture ......................................................... 79
    No sound .......................................................... 79
    Distorted sound................................................. 79
    No response from remote control ..................... 79
    If nothing works................................................. 79
    Definition of Terms ................................................ 79
    Disc Types Compatible with This Unit .................. 80
    Supported File Formats ........................................ 81
    Specifications ....................................................... 81

    General Properties
    • DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG
    / DivX playback.
    • NTSC/PAL playback (according to disc content)
    • LPCM audio via coaxial digital audio output.
    (optional)
    • Multi-Audio (up to 8) support (According to disc
    content)
    • Multi-Subtitle (up to 32) support (According to disc
    content)
    • Multi-Angle (up to 9) support (According to disc
    content)
    • 8 level parental control
    • Fast forward and rewind in 5 different speeds. (2x,
    4x, 8x, 16x, 32x)
    • Slow motion playback in 4 different speeds. (1/2x,
    1/4x, 1/8x, 1/16x forward)
    • Frame by frame forward playback.
    • Search Mode
    • Repeat
    • Coaxial audio output (optional)
    • Copied disks may be incompatible.
    Note
    • This DVD player may not support some MP3
    recordings due to differences in recording formats
    or disc type.
    • Please read the owner’s manual about MP3 playback.
    • CD-R/CD-RW discs recorded by CD-DA method
    can be played. Some CD-R/CD-RW discs may be
    incompatible due to laser pick-up and disc design.
    • DVD-R/RW discs recorded by DVD-Video method
    can be played . Some DVD-R/RW discs may be
    incompatible due to laser pick-up and disc design.
    • Some discs may be incompatible with JPEG Viewer
    function due to different recording format or
    condition of the discs.

    English - 73 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 73

    15.12.2010 17:24:14



  • Page 33

    On cleaning

    Safety Information
    CAUTION
    DVD Player is a class 1 laser product. However this
    product uses a visible laser beam which could cause
    hazardous radiation exposure. Be sure to operate the
    player correctly as instructed.

    • Before playing, clean the disc with a cleaning cloth.
    Wipe the disc from the center out.

    CLASS 1
    LASER PRODUCT
    • Do not use solvents such as benzine, thinner,
    commercially available cleaners or anti-static spray
    intended for vinyl LPs.

    RISK OF ELECTRIC SHOCK
    The lightning flash with arrowhead
    symbol, within an equilateral triangle, is
    intended to alert the user to the presence
    of uninsulated “dangerous voltage” within
    the product’s enclosure that may be of
    sufficient magnitude to constitute a risk
    of electric shock of persons.

    Licence Notification
    • This product incorporates copyright protection
    technology that is protected by U.S. patents
    and other intellectual property rights. Use of
    this copyright protection technology must be
    authorized by Rovi Corporation, and is intended for
    home and other limited viewing uses only unless
    otherwise authorized by Rovi Corporation. Reverse
    engineering and disassembly are prohibited.

    The exclamation point within an equilateral
    triangle is intended to alert the user to the
    presence of important operating and
    maintenance (servicing) instructions
    in the literature accompanying the
    appliance.

    How to Watch a DVD

    Notes on Discs

    When placing a disc into the loader, labeled side of
    the disc should be on the front:

    On handling discs
    • To keep the disc clean, handle the disc by its edge.
    Do not touch the surface.
    • Do not stick paper or tape on the disc.
    • If the disc is contaminated with any substance like
    glue remove before using it.

    • Do not expose the disc to direct sunlight or heat
    sources such as hot air ducts, or leave it in a car
    parked in direct sunlight as the temperature can rise
    quickly and damage the disc.

    When TV set is turned on, first switch to DVD source
    by using the SOURCE button on the remote control.
    Press play on the remote control, or directly press play
    button at the front panel. If there is no disc inside the
    loader, place a DVD first and press play.

    • After playing, store the disc in its case.

    English - 74 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 74

    15.12.2010 17:24:14



  • Page 34

    DVD Control Panel Buttons
    A. Disc loader
    B. Play / Pause
    Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as
    “button select” (selects the highlighted item in menu) if this is not prohibited by the disc.

    C. Stop / Eject
    Stop playing disc / Eject or Load the disc Note:
    • You cannot eject the disc via the remote control.
    • While playing a file, you should press STOP button three times to eject.

    Overview of the Remote Control
    1. Standby
    2. Numeric buttons
    3. Return back

    INFO

    4. Language selection (Set language)
    SLEEP

    5. Display time / DVD menu

    SCREEN

    SOURCE

    PRESETS

    6. Clear
    7. Stop
    8. No function
    9. Rapid Reverse
    10. Rapid advance

    RETURN

    11. Info

    MENU

    12. Zoom
    13. Repeat
    14. Root
    15. Menu
    16. Title
    17. OK / Select
    18. Navigation Buttons
    19. Subtitle

    FAV

    LANG.

    SUBTITLE

    EPG

    /

    20. Angle
    21. Search mode
    22. Play
    23. Pause
    24. Skip next
    25. Skip previous

    English - 75 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 75

    15.12.2010 17:24:15



  • Page 35

    General Operation
    You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote
    control. Below are main functions of commonly used remote control buttons.

    Buttons on the
    Remote Control

    /

    Movie
    Playback

    Picture
    Playback

    Music
    Playback

    Play

    Play

    Play

    Play

    Pause

    Pause

    Pause

    Pause

    Stop

    Stop

    Stop

    Stop

    /

    Skip
    Skip
    Previous / Next Previous / Next
    backward/forward
    backward/forward
    Shifts the zoomed picture left or right (if available).

    /

    Highlights a menu item. / Shifts the zoomed picture down or up (if available).

    /
    ANGLE

    C
    DISPLAY
    INFO
    LANG.
    MENU

    Fast reverse / Fast forward
    Changes slide
    Views the scene from different angles (if effect (depends
    X
    available).
    on the
    content).
    Clears digit (if available).
    Displays time / Views main setup menu
    Time counter mode selection (during playback). Press repeatedly to switch
    between modes.
    Audio language.
    X
    X
    Displays TV menu.

    OK / SELECT
    REPEAT

    Enter / View / Play
    Displays repeat options.

    RETURN

    Returns back to the previous menu (if available).
    Goes back to the root folder (if available).
    Selects the
    Selects the
    Direct selection of scenes or time.
    desired file.
    desired file.
    Subtitle on-off. Press repeatedly to switch
    X
    X
    between subtitle options.

    ROOT
    SEARCH MODE (*)
    SUBTITLE

    TITLE
    ZOOM

    [

    DVD
    Playback

    +
    +
    +
    +
    +
    +

    ]

    +

    Displays disc menu
    (if available).

    Displays disc menu
    (if available).

    X

    X

    Zooms picture. Press repeatedly to switch between zoom options.
    Other Functions – Button Combinations
    (During playback)
    Slow forward.
    Sets slow forward speed.
    Sets fast forward speed.
    Sets fast reverse speed.
    Confirms stop command.
    Press
    repeatedly to advance manually.

    (*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to
    switch one digit titles (example: to select 5, press 0 and 5.

    English - 76 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 76

    15.12.2010 17:24:16



  • Page 36

    11. Reverse stepping is not available.

    General Playback

    12. For your convenience:

    Basic Play
    1. Press on the power button
    2. Please insert a disc to the loader.
    The disc will be automatically loaded and play
    commences if the disc does not have any menus
    recorded on it.
    A menu may appear on the TV screen after a few
    moments or the film may start immediately after the
    introduction of the Film Company. This behaviour
    depends on the disc content and may change.

    If you attempt to enter a number greater than the total
    time of the current title, the time search box disappears
    and “
    Input Invalid” message appears on up-left
    corner of screen.
    13. Slide Show is disabled when the ZOOM mode
    is on.

    Setup Menu Items
    Vıdeo Setup Page

    Note: Step 3 and 4 is available only when a menu is
    recorded on the disc.
    3. Press “ ” / “ ” / / or the number button
    (s) to select the preferred title.
    4. Press SELECT.
    Play of the selected items now starts.The played item
    may be a motion picture, a still picture or another
    submenu depending on the disc.

    For your reference:

    TV Type

    If an action corresponding to a button is prohibited the

    TV Type is only available as ‘PAL’. The TV set also
    supports NTSC signal; however, the signal will be
    converted to PAL when it appears on the screen.



    ” symbol appears.

    Notes on Playback:

    DivX VOD

    1. No sound will be heard during Rapid advance
    or Rapid reverse.

    DivX VOD provides the convenience of streaming
    video in terms of quality and performance.

    2. No sound will be heard during Slow motion play.

    Language Setup

    3. Reverse slow motion play is not available.
    4. In some cases, the subtitle language is not
    changed immediately to the selected one.
    5. When the preferred language is not selected even
    after pressing the button several times, it means
    that the language is not available on the disc.
    6. When the player is restarted or the disc is
    changed, the subtitle selection is automatically
    changed back to the initial settings.
    7. If a language is selected, not supported by the
    disc, the subtitle language will automatically be
    set to the disc’s priority language.
    8. Usually a circulation will happen while switching
    to another language, that is you can cancel
    the subtitle by pressing this button a number of
    times until “Subtitle Off” appears on the screen.
    9. When the power is turned on or the disc is
    removed, the language heard is the one
    selected at the initial settings. If this language
    is not recorded on the disc, only the available
    language on the disc will be heard.
    10. Some DVDs may not contain root and/or title
    menus.

    OSD LANG
    You can select the default OSD language of the
    player menus

    AUDIO
    You can select the default audio language if supported
    by the DVD disc.

    DISC MENU
    You can select the DVD’s disc menu language among
    these languages. Disc menu appears in the selected
    language, if supported by the DVD disc.

    SUBTITLE

    You can select the default subtitle language if
    supported by the DVD disc.
    English - 77 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 77

    15.12.2010 17:24:16



  • Page 37

    Preferences

    SPDIF OUTPUT

    DEFAULT

    You can set Spdif Output as PCM or RAW. If you select
    PCM from SPDIF Output in DVD menu and play DVD
    with Dolby audio, you can get audio output with two
    channels via the speakers and the SPDIF Out. If you
    select RAW from SPDIF Output in DVD menu and play
    DVD with Dolby audio, speakers will be muted and you
    can get 5+1 Dolby audio via the SPDIF Out.

    If you choose RESET and press SELECT, the factorypresets are loaded. Parental level and parental
    password does not change.

    DOWNMIX
    This mode can be selected when the digital audio
    output of the TV is used.

    SURROUND: Surround sound output.

    Troubleshooting
    The picture quality is poor (DVD)

    STEREO: Two channels stereo.

    • Make sure the DVD disc surface is not damaged.
    (Scratch, fingerprint etc.)

    PARENTAL (Parental Level)

    • Clean the DVD disc and try again.
    See instructions described in “Notes on Discs” to clean
    your disc properly.
    • Ensure that the DVD disc is in the drawer with the
    label uppermost.
    • A damp DVD disc or condensation may effect the
    equipment. Wait for 1 to 2 hours in Stand-by to dry
    the equipment.
    Playing some DVDs can be limited depending on the
    age of users. The “Parental Control” function allows
    playback limitation level to be set by the parent.
    Parental Level can be adjusted to one of the eight
    levels. Level “8 ADULT” adjustment let you watch all of
    the DVD titles ignoring the DVD disc’s parental level.
    You can watch the DVD discs, which has the same or
    lower parental level than the player’s level only.

    PASSWORD (Change Password):

    Disc does not play
    • No disc in the machine.
    Place a disc into the loader.
    • Disc incorrectly loaded.
    Ensure that the DVD disc is in the drawer with the
    label uppermost.
    • Wrong type of disc. The machine cannot play CDROMS etc.

    Using this item you can change the current
    password.

    • The region code of the DVD must match the
    player.

    To change the password you will be prompted to
    enter your old password. After you have entered
    your old password, you can now enter the new 4-digit
    password.

    Wrong OSD language

    You can use C key to delete the incorrect entry.
    Note: Factory preset of the password is “0000”. You
    have to enter XXXX digital password every time you
    want to change the parental level. If you forget your
    password please contact technical service.

    • Select the language in the set-up menu.
    • The language for the sound or subtitles on a DVD
    cannot be changed.
    • Multilingual sound and/or subtitles not recorded on
    the DVD.
    • Try to change the sound or subtitles using DVD’s title
    menu. Some DVD’s do not allow the user to change
    these settings without using the disc’s menu

    English - 78 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 78

    15.12.2010 17:24:16



  • Page 38

    Some functions (Angle, Zoom etc) do
    not work
    • These functions are not available on the DVD.
    • Angle can only be changed when the angle symbol
    is displayed.

    No picture
    • Have you pressed the correct buttons on the remote
    control? Try once more.

    DVD has a structure consisting of two 0.6-mm thin
    discs, which are adhered to each other. Since the
    thinner the disc, the higher the density at which the
    information can be recorded, a DVD disc has a greater
    capacity than a single 1.2 mm thick disc. Since the
    two thin discs are adhered to each other, there is the
    potential to achieve double-sided play sometime in
    the future for even longer duration play.

    Subtitles
    These are printed lines appearing at the bottom of
    the screen, which translate or transcribe the dialogue.
    They are recorded on the DVD discs.

    No sound
    • Check the volume is set to an audible level.
    • Make sure you have not switched the sound off
    accidentally.

    Distorted sound
    • Check that the appropriate listening mode setting
    is correct.

    No response from remote control
    • Make sure the remote control is in the correct
    mode.
    • Check batteries are fitted correctly.
    • Change the batteries.

    Time Number
    This indicates the playtime, which has elapsed from
    the start of a disc or a title. It can be used to find a
    specific scene quickly. (Not all discs permit the time
    search feature to be used. Availability is determined
    by the disc’s manufacturer.)

    Title Number
    These numbers are recorded on DVD discs. When a
    disc contains two or more movies, these movies are
    numbered as title 1, title 2, etc.

    Track Number

    If nothing works
    If you have tried the above solutions and none seem
    to work, try switching your TV-DVD off and on again.
    If this does not work, contact your supplier or TV-DVD
    repair technician. Never attempt to repair a defective
    TV-DVD yourself.

    Definition of Terms

    These numbers are assigned to the tracks, which are
    recorded on AudioCDs. They enable specific tracks
    to be located quickly.

    LPCM
    LPCM stands for Pulse Code Modulation and is
    digital audio.

    MPEG

    Angle
    Recorded onto some DVD discs are scenes, which
    have been simultaneously shot from a number of
    different angles (the same scene is shot from the
    front, from the left side, from the right side, etc.). With
    such discs, the ANGLE button can be used to view
    the scene from different angles.

    Chapter Number

    Short for Moving Picture Experts Group. This is an
    international standard for compression of moving
    images. On some DVDs digital audio has been
    compressed and recorded in this format.

    DivX
    DivX is a digital video compression technology based
    on MPEG-4 and developed by DivX Networks Inc.

    These numbers are recorded on DVD discs. A title
    is subdivided into many sections, each of which are
    numbered, and specific parts of video presentations
    can be searched quickly using these numbers.

    DVD
    This refers to a high-density optical disc on which
    high-quality pictures and sound have been recorded
    by means of digital signals. Incorporating a new video
    compression technology (MPEG II) and high-density
    recording technology. DVD enables aesthetically
    pleasing full-motion video to be recorded over long
    periods of time (for instance, a whole movie can be
    recorded).
    English - 79 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 79

    15.12.2010 17:24:17



  • Page 39

    Disc Types Compatible with This Unit
    D is c Ty p e s
    (L o g o s )

    R e c o r d in g
    Ty p e s

    D is c S iz e

    DVD
    12 cm
    A u d io
    +
    V id e o

    A U D IO -C D

    8 cm

    12 cm

    M ax.
    P la y in g
    T im e
    S i n g le s id e d ; 2 4 0 m in .

    C h a r a c t e r is tic s



    D V D c o n ta in s e x c e lle n t s o u n d a n d v id e o



    V a r io u s s c r e e n a n d a u d io fu n c t io n s c a n b e

    D o u b le s id e d ; 4 8 0 m in .
    S i n g le s id e d ; 8 0 m in .
    D o u b le s id e d ; 1 6 0 m in .

    7 4 m in .

    d u e to D o lb y D ig i ta l a n d M P E G - 2 S y s te m .

    e a s ily s e l e c t e d t h r o u g h th e o n s c r e e n
    m e nu .

    • A n L P is r e c o r d e d a s a n a n a lo g s ig n a l w ith
    m o r e d is t o rtio n . C D is r e c o r d e d a s a

    D ig ita l S ig n a l w ith b e t te r a u d i o q u a lity,

    A u d io

    a u d io q u a lit y o v e r t im e .

    8 cm

    D I G IT A L A U D I O

    M P 3 -C D

    READABLE

    le s s d is t o r t io n a n d le s s d e t e rio ra t io n o f

    2 0 m in .

    12 cm
    A u d io
    (x x x x .m p 3 )



    M P 3 is r e c o r d e d a s a D ig ita l S ig n a l w it h
    b e tt e r a u d io q u a lity, le s s d is to rt i on a n d
    le s s d e t e rio ra t io n o f a u d io q u a lity
    o v e r tim e .

    8 cm

    P IC T U R E -C D
    12 cm

    JR EPA DE
    G
    ABLE



    V id e o
    (s t ill p ic tu r e )

    J P E G is r e c o rd e d a s a D ig it a l S ig n a l w ith
    b e tt e r p ic tu re q u a lity o v e r t im e .

    8 cm

    D iv X
    A u d io
    +
    V id e o

    12 cm



    V id e o & A u d io w ith M P E G -4 C o m p r e s s io n
    te c h n o lo g y.

    8 cm

    English - 80 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 80

    15.12.2010 17:24:17



  • Page 40

    Supported File Formats
    Media

    File
    Extension
    .mpg/ .dat/
    .vob

    Movie
    (optional)
    .avi

    -

    Music

    Format

    Remarks

    Video

    Audio

    (Maximum resolution/Bit rate etc.)

    MPEG1

    MPEG Layer
    1/2/3

    MPEG2

    MPEG2

    XviD/ 3ivx

    PCM/MP3

    MPEG4

    PCM/MP3

    MS ISO
    MPEG4

    PCM/MP3

    Support SP and ASP

    PCM

    Sample Rate: 8K ~ 48KHz

    -

    XviD Verson up to: 1.1.2 / DivX 3.1.x, 4.x, 5.x

    MPEG 1/2
    .mp3

    -

    WxH = 8902x8902 up to 77Mega-pixel

    Baseline JPEG

    Photo

    Sample Rate: 8K ~ 48KHz, Bit Rate:
    64K~320Kbps

    Layer 1/2/3
    (MP3)

    Support format: 444/ 440/ 422/ 420/ Grayscale

    .jpg

    Up to 4 Mega-pixel

    Progressive JPEG

    Support format: 444/ 440/ 422/ 420/ Grayscale

    .srt
    .smi

    External
    Subtitles

    .sub

    (optional)

    .ssa

    Support Text File Format, but do not support
    Picture File Format

    .ass

    Note: It is not guaranteed that all DivX formats are supported.

    Specifications
    DVD: SS/SL 4.7” (DVD-5)
    Types of Discs
    Supported

    CD-DA

    SS/DL 4.7” (DVD-9)

    CD-R

    DS/SL 4.7” (DVD-10)

    CD-RW

    DS/DL 4.7” (DVD-18)

    MP-3/JPEG

    MPEG-2 Video Standard Decoding (MPEG-1 supported)
    Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC) pixels
    Video Type

    50 and 60 Hz frame refresh rates (PAL & NTSC)
    Digital bit-stream processing rate up to 108Mbits/sec
    Line resolution more than 500 lines

    Audio Type
    Audio Output

    MPEG Multichannel Decoding
    LPCM
    Analog Outputs:
    24 bit /48, 44.1kHz down-sampling DAC

    English - 81 -

    A02_MB60_[GB]_(02-DVD)_WDIVX_1900UK_10071468_50181626.indd 81

    15.12.2010 17:24:17






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Akai ALED 1905T wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Akai ALED 1905T in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 4,74 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Akai ALED 1905T

Akai ALED 1905T Bedienungsanleitung - Deutsch - 43 seiten

Akai ALED 1905T Bedienungsanleitung - Holländisch - 43 seiten

Akai ALED 1905T Bedienungsanleitung - Französisch - 44 seiten

Akai ALED 1905T Bedienungsanleitung - Spanisch - 43 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info