589692
5
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Electronic Time Switch
Function:
Connect devices to the DTS-814 to
have them switch on and off automat-
ically.
The switching assignments are per-
formed to the exact minute.
Up to a maximum of 20 different
on and off switching times may be
programmed; these can be repeated
daily, weekly or for only part of the
week, according to your requirements.
A built-in rechargeable battery main-
tains the time and programming data
in case of a mains power outage and
allows you to program the switching
times with the timer disconnected
from the outlet.
Preparation:
1.
2.
3. Set the on/off switch of the device
or lamp you’ll be connecting to the
on position
To set the actual day and time:
Press and hold the CLOCK
button during the setup.
Repeatedly press the DAY
button (or briefly press and
hold) to set the day (*)
Repeatedly press the HOUR
button (or briefly press and
hold) to set the hours
Repeatedly press the MIN
button (or briefly press and
hold) to set the minutes
Finally release the CLOCK button
and the actual time and day are now
stored
*: MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
DTS-814
Daylight saving time:
Press and hold the CLOCK
button for 3 seconds to set
the clock to summer time;
press and hold again for 3
seconds to set to winter time
Set to
summer time
To set the switching times:
Up to a maximum of 20 different
on and off switching times may be
programmed; these can be repeated
daily, weekly or on a combination of
days, according to your requirements.
Repeatedly press the SET
button to select your desired
programme step and to
determine whether this must
be a switch on time (ON) or
switch off time (OFF)
Repeatedly press the DAY
button to set the day or a
combination of days
Repeatedly press the HOUR
button (or briefly press and
hold) to set the hour
Repeatedly press the MIN
button (or briefly press and
hold) to set the minutes
Press the SET button to
program the following pro-
gramme step
or press the CLOCK button
to end the programming
process
To check & adjust the switching
times:
Repeatedly press the SET
button; the display shows all
programme steps one after
the other
To change:
Use the DAY, HOUR or MIN
button to adjust the selected
programme step
To remove:
Use the SET button to recall
the concerned programme
step in the display
Press the RECALL button to
delete this step; the display
now shows: --:--
To undo a deletion:
Use the SET button to recall
the concerned programme
step in the display
Press the RECALL button
and the switching assign-
ment will be active again
10hr
3 sec.
+/- 1 hour
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alecto DTS-814 - V2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Alecto DTS-814 - V2

Alecto DTS-814 - V2 Bedienungsanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info