Bedienungsanleitung Alecto DTS-814 - V2 (Seite 6 von 8) (Deutsch, Englisch, Holländisch, Französisch)

589692

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Manual control:

Use the MANUAL button to switch

the device or lamp on and off man-

ually.

Device or

lamp is and

remains

switched on

Device or

lamp is en

remains

switched off

Device or

lamp is

switched

on until the next switch off

time

Device or

lamp is

switched

off until the next switch on

time

Random function:

When the Random function is

enabled, the connected lamp or

device is switched on or off according

to the programme steps, however

with a random delay of up to a maxi-

mum of 30 minutes.

Press and hold the HOUR

button for 3 seconds to

enable the Random func-

tion; press and hold again

for 3 seconds to disable the

Random function

Random

function

enabled

Countdown:

The Countdown function allows you

to immediately switch on the lamp or

device and to keep it switched on for

a pre-set period of time This function

may be used in combination with the

programmed switching times, in which

case the Countdown function is given

the priority

To set the Countdown time

Press the

SET button

41 times

until ‘CTD’ appears on the

right in the display

Use the HOUR and MIN

buttons to set the Countdown

time

Press the CLOCK button to

store the Countdown time

To activate the Countdown:

Simultaneously press the

HOUR and MIN buttons, the

lamp or device is switched

on and the display shows

the running Countdown time;

‘CTD’ flashes on the right in

the display.

As soon as the Countdown is

expired, the lamp or device

is switched off again

Functions during the

Countdown period:

Press the MANUAL button to

switch the lamp or device off

and to pause the Countdown

timer, press the MANUAL

button again to resume the

Countdown function

Press the CLOCK button to

switch the display between

the actual time and the

Countdown time; the timer

keeps running regardless

Simultaneously press the

HOUR and MIN buttons to

cancel the Countdown peri-

od; the lamp or device will

then be switched off

Type of device:

Because the DTS-814 uses a relay

for its switching function, basically

anything running on 230 Volts may be

connected.

Outdoor lighting may also be operat-

ed, provided that the time switch is

located indoors.

Specifications:

- 250V, 10A, 2300W max.

- Only applicable indoors.

Discarding the time switch:

The time switch may not be

discarded as normal house-

hold waste at the end of its

life span, you must bring it to

a collection point for the recycling of

electric and electronic devices.

V2.3

3 sec.

41x

Press

simultane-

ously

Press

simultane-

ously

EM-A261GX1

Service

Help

Service Help

WWW.ALECTO.NL

SERVICE@ALECTO.NL

Commaxx B.V.

6466 NG, Kerkrade

The Netherlands

WWW.ALECTO.NL

SERVICE@ALECTO.NL

Commaxx B.V., Wiebachstraat 37,

6466 NG Kerkrade, The Netherlands

Wiebachstraat 37

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DTS-814 - V2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alecto DTS-814 - V2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info