Bedienungsanleitung Allen-Heath ML 3000 (Seite 42 von 48) (Englisch)

541363

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

42 ML3000 User Guide

MIDI / RS232

The MIDI Cables

Use standard 5-pin 180 degree DIN type male-to-

male MIDI cables. These should be available from

your local audio dealer or music shop. The cables

should not exceed 15 meters (50 feet) in length.

To control external equipment plug console MIDI

OUT to external equipment MIDI IN. To control the

console plug external equipment MIDI OUT or

THRU to console MIDI in.

Make sure the same MIDI channel number is

selected on the console and external equipment

you want the console to communicate with.

RS232

Set the rear panel switch to RS232 if you need to

load in new console operating software or interface

to a PC via its serial port. The Allen & Heath ML

Archiver software provides archiver and snapshot

manager functions that run on a PC.

Note: The console takes longer to boot after power

up when the rear switch is set to RS232. This is

because it interrogates the port for a code update.

For normal operation the MIDI position is

recommended.

MIDI Overview

The ML3000 includes a Musical Instrument Digital

Interface (MIDI) port. Standard 5-pin IN and OUT

sockets allow connection to external MIDI

equipment such as computer show control systems,

sequencers, instruments and data archiving

devices. Applications include sophisticated ‘hands-

off’ scene control, effects and instrument patch

control, switching of signal processing remote

controllers, and archiving of the console settings

and memories for later re-use.

What the console MIDI can do :

9 Turn channel mutes on and off

9 Store and recall snapshot memories

9 Snapshot program change messages

9 Archive console settings and memories

What the console MIDI cannot do :

8 Turn Mute Groups on and off

8 Turn VCA group mutes on and off

8 Assign channels to VCA groups

8 Control VCA fader levels

The capabilities of the console automation system

are subject to continual development and new

features may be added in time. The latest

operating software is available on the Allen & Heath

Internet site together with loading instructions.

Selecting MIDI Operation

For MIDI operation make sure the rear panel switch

is set to the MIDI position. The RS232 setting is

only used when updating the console operating

software to a new version, or with the Allen & Heath

ML3 Archiver utility for the PC.

Changing the MIDI Channel Number

Hold down the master section MIDI CH key. The

current MIDI channel number is displayed on one of

the CH1 to 16 GROUP ASSIGNED LEDs next to

the faders. The LED flashes to attract your

attention. Simply press one of the CH1 to 16 MUTE

keys while holding down MIDI CH to change the

MIDI channel number. The channel mute is not

affected during this operation.

SLAVE

mode

RS232

MIDI

Press and Hold with GRP MUTE

View on channels

MIDI

DUMP

CH1-16

Assign MUTE and VCA groups:

Select using GRP MUTE

Assign using CH MUTES

ASSIGN

VIEW

SELECT

OUT IN MIDI

RS232

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath ML 3000 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info