Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
Designed by ALPINE Japan
68-21627Z05-A
EN
DE
FR
ES
IT
SE
NL
RU
PL
GR
RR
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/
ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIEΙΑ ΧΡΗΣΗ ΜΟΝΟ ΣΕ ΑΥΤΟΚΙΝΗΤΟ
OWNER’S MANUAL
Please read before using this equipment.
ANVÄNDARHANDLEDNING
Innan du annder utrustningen bör du läsa
igenom denna användarhandledning.
BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
GEBRUIKERSHANDLEIDING
Lees deze aanwijzingen aandachtig alvorens dit
toestel te gebruiken.
MODE D’EMPLOI
Veuillez lire avant dutiliser cet appareil.
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Прочтите настоящее руководство перед
началом использования оборудования.
MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
INSTRUKCJA OBSŁUGI
Prosimy zapoznać się z tą instrukcją przed
przystąpieniem do użytkowania urządzenia.
ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΤΗ
Παρακαλούμε διαβάστε το πριν χρησιμοποιήσετε
τη συσκευή.
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
CD RECEIVER WITH DUAL USB AND BLUETOOTH
CDE-135BT
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
    AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/
    ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ΧΡΗΣΗ ΜΟΝΟ ΣΕ ΑΥΤΟΚΙΝΗΤΟ

    EN
    R

    CD RECEIVER WITH DUAL USB AND BLUETOOTH

    CDE-135BT

    DE

    FR

    ES

    • OWNER’S MANUAL
    Please read before using this equipment.
    • BEDIENUNGSANLEITUNG
    Lesen Sie diese Bedienungsanleitung bitte vor
    Gebrauch des Gerätes.
    • MODE D’EMPLOI
    Veuillez lire avant d’utiliser cet appareil.
    • MANUAL DE OPERACIÓN
    Léalo antes de utilizar este equipo.
    • ISTRUZIONI PER L’USO
    Si prega di leggere prima di utilizzare il
    attrezzatura.

    • ANVÄNDARHANDLEDNING
    Innan du använder utrustningen bör du läsa
    igenom denna användarhandledning.
    • GEBRUIKERSHANDLEIDING
    Lees deze aanwijzingen aandachtig alvorens dit
    toestel te gebruiken.
    • РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
    Прочтите настоящее руководство перед
    началом использования оборудования.
    • INSTRUKCJA OBSŁUGI
    Prosimy zapoznać się z tą instrukcją przed
    przystąpieniem do użytkowania urządzenia.
    • ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΤΗ
    Παρακαλούμε διαβάστε το πριν χρησιμοποιήσετε
    τη συσκευή.

    IT

    SE

    NL

    RU
    ALPINE ELECTRONICS MARKETING, INC.
    1-7, Yukigaya-Otsukamachi, Ota-ku,
    Tokyo 145-0067, JAPAN
    Phone: 03-5499-4531

    ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
    161-165 Princes Highway, Hallam
    Victoria 3803, Australia
    Phone 03-8787-1200

    ALPINE ITALIA S.p.A.
    Viale C. Colombo 8, 20090 Trezzano
    Sul Naviglio (MI), Italy
    Phone 02-484781

    ALPINE ELECTRONICS OF AMERICA, INC.
    19145 Gramercy Place, Torrance,
    California 90501, U.S.A.
    Phone 1-800-ALPINE-1 (1-800-257-4631)

    ALPINE ELECTRONICS GmbH
    Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
    Phone 089-32 42 640

    ALPINE ELECTRONICS DE ESPAÑA, S.A.
    Portal de Gamarra 36, Pabellón, 32
    01013 Vitoria (Alava)-APDO 133, Spain
    Phone 945-283588

    ALPINE ELECTRONICS OF CANADA, INC.
    777 Supertest Road, Toronto,
    Ontario M3J 2M9, Canada
    Phone 1-800-ALPINE-1 (1-800-257-4631)

    ALPINE ELECTRONICS OF U.K. LTD.
    Alpine House
    Fletchamstead Highway, Coventry CV4 9TW, U.K.
    Phone 0870-33 33 763

    ALPINE ELECTRONICS (BENELUX) GmbH
    Leuvensesteenweg 510-B6,
    1930 Zaventem, Belgium
    Phone 02-725-13 15

    ALPINE ELECTRONICS FRANCE S.A.R.L.
    (RCS PONTOISE B 338 101 280)
    98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
    B.P. 50016, 95945 Roissy Charles de Gaulle
    Cedex, France
    Phone 01-48638989

    Designed by ALPINE Japan
    68-21627Z05-A

    PL

    GR



  • Page 2



  • Page 3

    Contents
    Operating Instructions
    WARNING
    WARNING ....................................................... 6
    CAUTION ........................................................ 6
    PRECAUTIONS ............................................... 6

    Getting Started
    Accessory List ...............................................................9
    Turning Power On and Off.......................................9
    Source Selection..........................................................9
    Detaching and Attaching the Front Panel .........9
    Detaching ..................................................................9
    Attaching ...................................................................9
    Initial System Start-Up...............................................9
    Adjusting Volume .................................................... 10
    Setting the Dimmer Control................................. 10

    Radio
    Listening to Radio.................................................... 10
    Presetting Stations Manually............................... 10
    Presetting Stations Automatically...................... 11
    Tuning to Preset Stations ...................................... 11
    Frequency Search Function.................................. 11

    RDS
    Turning AF (Alternative Frequencies)
    ON/OFF ........................................................................ 11
    Receiving RDS Regional (Local) Stations ......... 12
    PI SEEK Setting .......................................................... 12
    Setting PTY31 (Emergency Broadcast)
    reception..................................................................... 12
    Receiving Traffic Information............................... 12
    PTY (Programme Type) Tuning ........................... 13
    Receiving Traffic Information While Playing
    CD or Radio ................................................................ 13
    Priority News.............................................................. 13
    Displaying Radio Text ............................................. 13

    ENGLISH
    CD/MP3/WMA/AAC
    Playback .......................................................................14
    Repeat Play .................................................................14
    M.I.X. (Random Play) ................................................14
    Searching for CD Text..............................................14
    Folder/File Name Search
    (concerning MP3/WMA/AAC) ..............................14
    Folder Name Search mode................................14
    File Name Search mode .....................................15
    Quick Search...............................................................15
    About MP3/WMA/AAC ...........................................15
    Terminology ...........................................................16

    Sound Setting
    Adjusting Subwoofer Level/Bass Level/Mid
    Level/Treble Level/Balance (Between Left and
    Right)/Fader (Between Front and Rear)/AUX Mix
    Level/Loudness/Defeat...........................................16
    Sound Setting ............................................................17
    Equalizer Presets (FACTORY EQ) ......................17
    Adjusting the Parametric Equalizer Curve
    (3BAND EQ).............................................................17
    Setting the Bass Control ..........................................17
    Setting the Mid Control ...........................................17
    Setting the Treble Control.......................................18

    Adjusting the High Pass Filter ..........................18
    Turning Subwoofer ON/OFF.............................18
    Adjusting the Low Pass Filter ...........................18
    Setting the Subwoofer Phase...........................18
    Setting the Subwoofer System ........................18

    Other Functions
    Displaying the Text...................................................19
    About the indication display............................19
    About “Text” ...........................................................19
    Using the Front AUX Input Terminal..................20

    3-EN



  • Page 4

    Contents
    SETUP
    Setting.......................................................................... 20
    General Setting..................................................... 21
    Playing MP3/WMA/AAC Data (PLAY MODE).....21
    Setting the AUX SETUP Mode................................21
    Setting the AUX Level (AUX GAIN) .......................21
    Setting the AUX MIX..................................................21
    Setting the Language (CYRILLIC)..........................21
    Connecting to an External Amplifier
    (POWER IC)....................................................................21
    Demonstration............................................................22

    Display Setting...................................................... 22
    Changing Lighting Colour ......................................22
    Scroll Type Setting .....................................................22
    Scroll Setting (TEXT SCR) .........................................22

    Tuner Setting ......................................................... 22
    Adjusting Source Signal Levels (FM-LEVEL)......22

    USB and vTuner Setting .................................... 22
    Setting the USB Search Mode................................22
    Setting the USB Skip function ...............................23
    Setting the vTuner Source.......................................23
    Setting the vTuner Volume .....................................23

    BT Hands Free Calling
    Setup Before Using.................................................. 23
    About BLUETOOTH.............................................. 23
    Before Using BLUETOOTH Function .............. 23
    How to connect to a BLUETOOTH compatible
    device (Pairing) ..................................................... 23
    Pairing a BLUETOOTH compatible device with
    SSP (Secure Simple Pairing)....................................24
    Pairing a BLUETOOTH compatible device
    without SSP (Secure Simple Pairing)...................24

    BLUETOOTH SETUP.................................................. 24
    Setting the BLUETOOTH Connection
    (BT IN) ....................................................................... 24
    Hands-Free Phone setting (HFP)...........................24
    BLUETOOTH Audio setting (AUDIO) ....................24

    Setting the BLUETOOTH Device ..................... 24
    Setting the Visible Mode ................................... 25
    Pairing a BLUETOOTH Device from the
    unit ............................................................................ 25
    Setting the BLUETOOTH sound quality........ 25
    Adjusting the volume (VOL LV ADJ)....................25
    Sound Auto setting (AUTO SET)............................25

    Setting the caller information display
    ON/OFF.................................................................... 25
    Phone Book Auto Update ON/OFF................ 25
    Setting the BLUETOOTH Menu language ... 25
    Changing the Phone book List Order........... 26
    Setting the Received Calls automatically
    (Auto Answer)........................................................ 26
    Displaying the phone service provider
    name......................................................................... 26

    4-EN

    ENGLISH
    Selecting the output speaker...........................26
    Displaying the firmware version .....................26
    Updating the firmware .......................................26
    Hands-Free Phone Control....................................26
    About the Hands-Free Phone...........................26
    Answering a Call ...................................................26
    Hanging up the Telephone ...............................27
    Calling.......................................................................27
    Voice Dial Operation .................................................27
    Redialing a Number In Outgoing History..........27
    Dialing a Number In Incoming History...............27
    Dialing a Number In Incoming Missed Call
    History ............................................................................27
    Dialing a Number In The Phone Book.................28
    Phone book Alphabet Search Function .............28

    Call waiting function ...........................................28
    Preset a number in the Phone Menu
    (Shortcut dial) ........................................................28
    Dialing the preset number................................28
    Adjusting the volume when receiving a
    Call .............................................................................28
    Muting the microphone input quickly
    (Voice Mute) ...........................................................29
    Call Switching Operation...................................29
    BLUETOOTH Audio Operation..............................29
    Recalling the BLUETOOTH Audio Mode .......29
    Selecting the desired Song ..............................29
    Pausing.....................................................................29

    USB Memory (optional)
    Connecting USB Memory (optional) .................29
    When connect USB Memory to Front USB
    Connection Terminal...........................................29
    Remove USB Memory from Front USB
    Connection Terminal...........................................29
    Using the USB Memory Banking Function ......30
    Playback .......................................................................30
    Searching for a desired Song ...............................30
    Searching by Tag information..........................30
    Searching by artist name.........................................31

    Searching by (FILE NAME) mode ....................31
    Repeat Play .................................................................31
    M.I.X. (Random Play) ................................................31
    Select Playlist/Artist/Album/Genre/Composer/
    Folder ............................................................................32
    Alphabet Search Function
    (Tag search mode only) ..........................................32
    Quick Search ..............................................................32
    Search Position Memory ........................................32



  • Page 5

    Contents
    iPod/iPhone (optional)
    Connecting an iPod/iPhone................................. 33
    Setting the iPod Control........................................ 33
    Playback ...................................................................... 33
    Searching for a desired Song............................... 33
    Direct Search Function........................................... 34
    Select Playlist/Artist/Album/Genre/Composer/
    Episode ........................................................................ 34
    Alphabet Search Function .................................... 34
    Search Position Memory ....................................... 35
    Random Play Shuffle (M.I.X.) ................................ 35
    Repeat Play................................................................. 35
    Displaying the Text.................................................. 35

    vTuner internet radio (iPhone)
    (Optional)
    Listening to vTuner.................................................. 36
    Storing the desired station to Favourite
    List ................................................................................. 36
    Jumping to Favourite station............................... 36
    Deleting stored station from Favourite List.... 36
    Searching for a Desired Station .......................... 36
    Changing the Display ............................................. 37

    ENGLISH

    Installation and Connections
    WARNING .................................................... 41
    CAUTION...................................................... 41
    PRECAUTIONS ............................................. 41
    Installation ..................................................................42
    Removal ...................................................................42
    iPod/iPhone Connection
    (sold separately)....................................................42
    When connect to Front USB Connection
    Terminal .........................................................................43
    When connect to Rear USB Connector...............43

    Rear USB Memory Connection
    (sold separately)....................................................43
    Connect USB Memory ..............................................43
    Remove USB Memory ...............................................43

    Mounting the Microphone....................................43
    Connections ...............................................................44

    Information
    In Case of Difficulty.................................................. 37
    Basic.......................................................................... 37
    Radio......................................................................... 37
    CD .............................................................................. 37
    MP3/WMA/AAC .................................................... 38
    Audio ........................................................................ 38
    iPod ........................................................................... 38
    Indication for CD Player..................................... 38
    Indication for USB Memory .............................. 38
    Indication for iPod Mode................................... 39
    Indication for vTuner Mode.............................. 39
    BLUETOOTH mode............................................... 39
    Specifications ............................................................ 40

    5-EN



  • Page 6

    Operating Instructions
    WARNING
    WARNING
    This symbol means important instructions. Failure
    to heed them can result in serious injury or death.
    DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
    FROM SAFELY DRIVING YOUR VEHICLE.
    Any function that requires your prolonged attention should only be
    performed after coming to a complete stop. Always stop the vehicle
    in a safe location before performing these functions. Failure to do so
    may result in an accident.

    KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
    NOISES WHILE DRIVING.
    Excessive volume levels that obscure sounds such as emergency
    vehicle sirens or road warning signals (train crossings, etc.) can be
    dangerous and may result in an accident. LISTENING AT LOUD
    VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
    DAMAGE.

    DO NOT DISASSEMBLE OR ALTER.
    Doing so may result in an accident, fire or electric shock.

    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
    (Check with your dealer if you are not sure.) Failure to do so may
    result in fire, etc.

    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
    CHILDREN.
    Swallowing them may result in serious injury. If swallowed, consult
    a physician immediately.

    USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
    Failure to do so may result in fire or electric shock.

    DO NOT BLOCK VENTS OR RADIATOR PANELS.
    Doing so may cause heat to build up inside and may result in fire.

    USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
    Use for other than its designed application may result in fire,
    electric shock or other injury.

    DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION
    SLOTS OR GAPS.
    Doing so may result in personal injury or damage to the product.

    6-EN

    CAUTION
    This symbol means important instructions. Failure
    to heed them can result in injury or material
    property damage.
    HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
    Failure to do so may cause personal injury or damage to the
    product. Return it to your authorized Alpine dealer or the nearest
    Alpine Service Centre for repairing.

    PRECAUTIONS
    Product Cleaning
    Use a soft dry cloth for periodic cleaning of the product. For more
    severe stains, please dampen the cloth with water only. Anything
    else has the chance of dissolving the paint or damaging the plastic.

    Temperature
    Be sure the temperature inside the vehicle is between +60°C
    (+140°F) and −10°C (+14°F) before turning your unit on.

    Moisture Condensation
    You may notice the CD playback sound wavering due to
    condensation. If this happens, remove the disc from the player and
    wait about an hour for the moisture to evaporate.

    Damaged Disc
    Do not attempt to play cracked, warped, or damaged discs. Playing
    a bad disc could severely damage the playback mechanism.

    Maintenance
    If you have problems, do not attempt to repair the unit yourself.
    Return it to your Alpine dealer or the nearest Alpine Service Station
    for servicing.

    Never Attempt the Following
    Do not grip or pull out the disc while it is being pulled back into the
    player by the automatic reloading mechanism.
    Do not attempt to insert a disc into the unit when the unit power is
    off.



  • Page 7

    Inserting Discs

    Disc Cleaning

    Your player accepts only one disc at a time for playback. Do not
    attempt to load more than one disc.
    Make sure the label side is facing up when you insert the disc.
    “ERROR” will be displayed on your player if you insert a disc
    incorrectly. If “ERROR” continues to be displayed even though the
    disc has been inserted correctly, push the RESET switch with a
    pointed object such as a ballpoint pen.
    Playing a disc while driving on a very bumpy road may result in
    skips, but this will not scratch the disc or damage the player.

    Fingerprints, dust, or soil on the surface of the disc could cause the
    CD player to skip. For routine cleaning, wipe the playing surface
    with a clean, soft cloth from the centre of the disc to the outer edge.
    If the surface is heavily soiled, dampen a clean, soft cloth in a
    solution of mild neutral detergent before cleaning the disc.

    New Discs
    To prevent the CD from jamming, “ERROR” is displayed if discs
    with irregular surfaces are inserted or if discs are inserted
    incorrectly. When a new disc is ejected immediately after initial
    loading, use your finger to feel around the inside of the centre hole
    and outside edge of the disc. If you feel any small bumps or
    irregularities, this could inhibit proper loading of the disc. To
    remove the bumps, rub the inside edge of the hole and outside edge
    of the disc with a ballpoint pen or other such instrument, then
    insert the disc again.
    Centre Hole

    Bumps

    Disc Accessories
    There are various accessories available on the market for protecting
    the disc surface and improving sound quality. However, most of
    them will influence the thickness and/or diameter of the disc. Using
    such accessories can cause the disc to be out of standard
    specifications and may create operational problems. We
    recommend not using these accessories on discs played in Alpine
    CD players.

    Centre Hole
    New Disc

    Outside
    (Bumps)

    Transparent Sheet

    Disc Stabilizer

    On handling Compact Discs (CD/CD-R/CD-RW)

    Irregular Shaped Discs
    Be sure to use round shape discs only for this unit and never use any
    special shape discs.
    Use of special shape discs may cause damage to the mechanism.








    Do not touch the surface.
    Do not expose the disc to direct sunlight.
    Do not affix stickers or labels.
    Clean the disc when it is dusty.
    Make sure that there are no bumps around the disc.
    Do not use commercially available disc accessories.

    Do not leave the disc in the car or the unit for a long time. Never
    expose the disc to direct sunlight. Heat and humidity may damage
    the CD and you may not be able to play it again.

    Installation Location
    Make sure this unit will not be installed in a location subjected to:





    Direct sun and heat
    High humidity and water
    Excessive dust
    Excessive vibrations

    To customers using CD-R/CD-RW
    • If a CD-R/CD-RW cannot be played back, make sure the last
    recording session was closed (finalised).
    • Finalize the CD-R/CD-RW if necessary, and attempt playback again.

    About media that can be played
    Use only compact discs with the label side showing the CD logo
    marks below.

    Correct Handling
    Do not drop the disc while handling. Hold the disc so you will not
    leave fingerprints on the surface. Do not affix tape, paper, or
    gummed labels to the disc. Do not write on the disc.

    INCORRECT

    CORRECT

    If you use non-standard compact discs, correct performance cannot
    be guaranteed.
    You can play CD-Rs (CD-Recordables)/CD-RWs
    (CD-ReWritables) which have been recorded only on audio devices.
    You can also play CD-Rs/CD-RWs containing MP3 formatted
    audio files.

    CORRECT

    • Some of the following CDs may not play on this unit:
    Flawed CDs, CDs with fingerprints, CDs exposed to extreme
    temperatures or sunlight (e.g., left in the car or this unit), CDs
    recorded under unstable conditions, CDs on which a recording failed
    or a re-recording was attempted, copy-protected CDs which do not
    conform to the audio CD industry standard.

    7-EN



  • Page 8

    • Use discs with compressed audio files written in a format compatible
    with this unit. For details, refer to “About MP3/WMA/AAC” on
    page 15.
    • Data files, other than audio, on the disc are ignored and are not
    played back.

    Protecting the USB Connection Terminal
    • Only USB Flash Memory devices or iPod/iPhone can be connected to
    the USB connection terminal on this unit. Correct performance using
    other USB products cannot be guaranteed. A USB hub is not
    supported.
    • Depending on the shape or size of a USB memory, it may not be
    connected to the USB terminal of this unit-a USB cable (sold
    separately) is recommended for this connection.
    Also, avoid connecting Flash Memory and Front Aux at the same
    time.
    • If a USB device is inserted in the unit, it projects out and may be a
    danger while driving.
    Use a commercially available USB extension cable, and connect it in a
    safe way.
    • Depending on the connected Flash Memory device, the unit may not
    function or some functions may not be performed.
    • The audio file format that can be played back on the unit is MP3/
    WMA/AAC.
    • Artist/song name, etc., can be displayed, however characters may not
    be correctly displayed.

    On Handling USB Flash Memory

    CAUTION
    Alpine accepts no responsibility for lost data, etc., even if data,
    etc., is lost while using this product.
    • To prevent malfunction or damage, note the following points.
    Read the Flash Memory Owner’s Manual thoroughly.
    • Fix the USB Memory in a location where driver operation will not be
    hindered.
    • Flash Memory may not function correctly at high or low temperature.
    • Use only certified USB Flash Memory Devices. Please pay attention
    that even certified USB Memory, may not function correctly
    depending on its type or state.
    • Flash Memory function is not guaranteed. Use Flash Memory
    according to the terms of agreement.
    • Depending on the settings of the Flash Memory type, memory state
    or encoding software, the unit may not play back or display properly.
    • A file that is copy-protected (copyright protection) cannot be played
    back.
    • Flash Memory may take time to start playback. If there is a particular
    file other than audio in the Flash Memory, it may take considerable
    time before the file is played back or searched.
    • The unit can play back “mp3”, “wma” or “m4a” file extensions.
    • Do not add the above extensions to a file other than audio data. This
    non-audio data will not be recognised. The resulting playback may
    contain noise that can damage speakers and/or amplifiers.
    • It is recommended to back up important data on a personal
    computer.
    • Do not remove the USB device while playback is in progress. Change
    SOURCE to something other than USB, then remove the USB device
    to prevent possible damage to its memory.

    8-EN

    • Windows Media, and the Windows logo are trademarks, or
    registered trademarks of Microsoft Corporation in the United States
    and/or other countries.
    • iPhone, iPod, iPod classic, iPod nano, and iPod touch are
    trademarks of Apple Inc., registered in the U.S. and other countries.
    • “Made for iPod,” and “Made for iPhone,” mean that an electronic
    accessory has been designed to connect specifically to iPod, or
    iPhone, respectively, and has been certified by the developer to meet
    Apple performance standards. Apple is not responsible for the
    operation of this device or its compliance with safety and regulatory
    standards. Please note that the use of this accessory with iPod, or
    iPhone may affect wireless performance.
    • The BLUETOOTH® word mark and logos are registered
    trademarks owned by the Bluetooth SIG, Inc. and any use of such
    marks by Alpine Electronics, Inc. is under license.
    • “MPEG Layer-3 audio coding technology licensed from Fraunhofer
    IIS and Thomson.”
    • “Supply of this product only conveys a licence for private,
    non-commercial use and does not convey a license nor imply any
    right to use this product in any commercial (i.e. revenue-generation)
    real time broadcasting (terrestrial, satellite, cable and/or any other
    media), broadcasting/streaming via internet, intranets and/or other
    networks or in other electronic content distribution systems, such as
    pay-audio or audio-on-demand applications. An independent
    license for such use is required. For details, please visit
    http://www.mp3licensing.com ”
    • © 2010 Nokia. All rights reserved. Nokia and Works with Nokia are
    trademarks or registered trademarks of Nokia Corporation.
    • “vTuner” and “Nothing Else Matters Software, Ltd.” logos are
    trademarks of Nothing Else Matters Software, Ltd., Inc. Other
    featured words or symbols, used to identify the source of
    merchandise or services, may be the trademarks of their respective
    owners.



  • Page 9

    Detaching and Attaching the Front Panel

    Getting Started

    Detaching
    SOURCE/

    1
    2

    Rotary encoder

    3

    Turn off the unit power.
    Press e (Release) at the lower left side until the front
    panel pops out.
    Grasp the left side of the front panel and pull it out.

    BAND/F/R
    e

    FUNC./VIEW

    6/DIMMER

    Accessory List











    Head Unit ..................................................................................1
    Power Cable ..............................................................................1
    Microphone ..............................................................................1
    USB extension cable.................................................................1
    Mounting Sleeve ......................................................................1
    Carrying Case............................................................................1
    Rubber Cap ...............................................................................1
    Hex Bolt.....................................................................................1
    Screw (M5 × 8) ..........................................................................4
    Owner’s Manual..................................................................1 set

    Turning Power On and Off

    Notes
    • The front panel may become hot in normal usage (especially the
    connector terminals on the back of the front panel). This is not a
    malfunction.
    • To protect the front panel, place it in the supplied carrying case.
    • When detaching the front panel, do not apply excessive force as it may
    result in malfunction.

    Attaching

    1
    2

    Insert the right side of the front panel into the main unit.
    Align the groove on the front panel with the projections
    on the main unit.
    Push the left side of the front panel until it locks firmly into
    the main unit.

    Press SOURCE to turn on the unit.
    Note
    • The unit can be turned on by pressing any other button except  and
    e (Release).

    Press and hold SOURCE for at least 2 seconds to turn
    off the unit.
    Note
    • The first time power is turned on, the volume will start from level 12.

    Source Selection

    Notes
    • Before attaching the front panel, make sure that there is no dirt or dust
    on the connector terminals and no foreign object between the front
    panel and the main unit.
    • Attach the front panel carefully, holding the sides of the front panel to
    avoid pushing buttons by mistake.

    Press SOURCE to change the source.
    TUNER  DISC  USB FRONT*1/iPod FRONT*2  VTUNER F*3 
    BT AUDIO*4  AUXILIARY*5  TUNER

    *1 Displayed only when no iPod/iPhone is connected. During USB
    FRONT source, you can switch to USB REAR source by pressing
    BAND/F/R.
    *2 Displayed only when the iPod/iPhone is connected. During iPod
    FRONT source, you can switch to iPod REAR source by pressing
    BAND/F/R when an iPod/iPhone is connected to Rear USB
    Connector.
    *3 Displayed only when VTUNER is set to ON, refer to “Setting the
    vTuner Source” on page 23. During VTUNER F source, you can
    switch to VTUNER R source by pressing BAND/F/R.
    *4 Displayed only when AUDIO is set to ON, refer to “Setting the
    BLUETOOTH Connection (BT IN)” on page 24.
    *5 Refer to “Using the Front AUX Input Terminal” on page 20.

    Initial System Start-Up
    Be sure to press the RESET switch when using the unit for the first time,
    after changing the car battery, etc.

    1
    2

    Turn off the unit power.
    Remove the detachable front panel.

    9-EN



  • Page 10

    3

    Press RESET with a ballpoint pen or similar pointed object.

    Radio
    SOURCE/
     

    Rotary encoder

    RESET switch

    Adjusting Volume
    Turn the Rotary encoder until the desired sound is
    obtained.

    BAND
    TUNE/A.ME

    FUNC./VIEW

    Setting the Dimmer Control

    1
    2

    Press and hold FUNC.VIEW for at least 2 seconds so that
    the  indicator lights up.

    Listening to Radio

    Press and hold 6DIMMER for at least 2 seconds
    repeatedly to select the DIMMER mode.

    1
    2

    DIMMER A (Auto mode)  DIMMER ON  DIMMER OFF 
    DIMMER A
    DIMMER A mode:
    Decrease the illumination brightness of the blue button with the
    head lights of the vehicle ON. This mode decreases the unit’s
    backlighting at a certain extent at night.

    3

    Press TUNEA.ME to select the tuning mode.

    Note
    • The initial mode is Distance mode.
    Distance mode:
    Both strong and weak stations will be automatically tuned in
    (Automatic Seek Tuning).

    Press and hold FUNC.VIEW for at least 2 seconds to
    activate the normal mode.

    Local mode:
    Only strong stations will be automatically tuned in (Automatic
    Seek Tuning).

    The  indicator goes out.

    Notes

    Controllable with Remote Control
    This unit can be controlled with an optional Alpine remote control.
    For details, consult your Alpine dealer.
    Point the optional remote control transmitter at the remote control
    sensor.

    Press BAND repeatedly until the desired radio band is
    displayed.

    DX SEEK (Distance mode)  SEEK (Local mode)  OFF (Manual
    mode)  DX SEEK

    DIMMER OFF mode:
    Keep the illumination brightness of the blue button bright.

    • Operate the unit while the  indicator lights up. If no operation is
    performed for 5 seconds, the  indicator goes out.
    • The function is inoperable when the ILLUMINATI is set to other than
    TYPE1, refer to “Changing Lighting Colour” on page 22.

    Press SOURCE to select TUNER mode.

    F1 (FM1)  F2 (FM2)  F3 (FM3)  MW  LW  F1 (FM1)

    DIMMER ON mode:
    Keep the illumination brightness of the blue button dark.

    3

    Preset buttons
    (1 through 6)

    Manual mode:
    The frequency is manually tuned in steps (Manual tuning).

    4

    Press  or  to tune in the desired station.
    Holding down  or  will change the frequency
    continuously.

    Presetting Stations Manually

    Remote control sensor

    While receiving the station that you want to store, press
    and hold, for at least 2 seconds, any one of the preset
    buttons (1 through 6) into which you wish to store the
    station.
    The display shows the band, preset number and station
    frequency memorised.

    Notes
    Connectable to Remote Control Interface Box
    With an optional Alpine Steering Wheel Remote Control Interface
    Box (not included), this unit is controllable from the vehicles
    steering wheel controls. For details, contact your Alpine dealer.

    10-EN

    • A total of 30 stations can be stored in the preset memory (6 stations for
    each band; FM1, FM2, FM3, MW and LW).
    • If you store a station in a preset memory which already has a station,
    the current station will be cleared and replaced with the new station.
    • If the  indicator is illuminated, turn off the indicator by pressing
    and holding FUNC.VIEW for at least 2 seconds, and then you can
    perform the operation.



  • Page 11

    Presetting Stations Automatically

    1
    2

    Press BAND repeatedly until the desired radio band is
    displayed.

    RDS
    AUDIO/SETUP /TA


    Press and hold TUNEA.ME for at least 2 seconds.



    Rotary encoder

    The frequency on the display continues to change while the
    automatic memory is in progress. The tuner will automatically
    seek and store 6 strong stations in the selected band. They will
    be stored into preset buttons 1 to 6 in order of signal strength.
    When the automatic memory has been completed, the tuner
    goes to the station stored in preset location No.1.

    Note
    • If no stations are stored, the tuner will return to the original station you
    were listening to before the auto memory procedure began.

    Tuning to Preset Stations
    Select the band, and then press any one of the station
    preset buttons (1 through 6) that has your desired radio
    station in memory.
    The display shows the band, preset number and frequency of
    the station selected.

    Note
    • If the  indicator is illuminated, turn off the indicator by pressing
    and holding FUNC.VIEW for at least 2 seconds, and then you can
    perform the operation.

    Frequency Search Function

    1/AF
    3/PTY
    FUNC./VIEW 2/NEWS

    Turning AF (Alternative Frequencies) ON/OFF
    The RDS (Radio Data System) is a radio information system using the
    57 kHz subcarrier of regular FM broadcast. The RDS allows you to
    receive a variety of information such as traffic information, station
    names, and to automatically re-tune to a stronger transmitter that is
    broadcasting the same programme.

    1

    Press and hold FUNC.VIEW for at least 2 seconds so that
    the  indicator lights up.

    2

    Press 1AF to select the AF (Alternative Frequency) ON or
    OFF mode.

    3

    Press and hold FUNC.VIEW for at least 2 seconds to
    activate the normal mode.

    You can search for a radio station by its frequency.

    1
    2
    3

    Press and hold ENTER for at least 2 seconds in Radio
    mode to activate Frequency search mode.
    Turn the Rotary encoder to select the desired frequency.
    Press ENTER to receive the selected frequency.

    Note
    • Press  in the search mode to cancel. Or, the search mode will be
    cancelled if no operation is performed for 10 seconds.

    The  indicator goes out.

    Notes
    • When the AF ON mode is selected, the unit automatically tunes to a
    strong signal station in the AF list.
    • Use the AF OFF mode when automatic re-tuning is not required.
    • When the PTY31 (Emergency Broadcast) reception is set to on (refer to
    “Setting PTY31 (Emergency Broadcast) reception” on page 12), if the
    unit receives the PTY31 (Emergency Broadcast) signal, the unit will
    show “ALARM” in the display automatically.
    • Operate the unit while the  indicator lights up. If no operation is
    performed for 5 seconds, the  indicator goes out.

    The RDS digital data includes the following:
    PI

    Programme Identification

    PS

    Programme Service Name

    AF

    List of Alternative Frequencies

    TP

    Traffic Programme

    TA

    Traffic Announcement

    EON

    Enhanced Other Networks

    11-EN



  • Page 12

    Receiving RDS Regional (Local) Stations

    1
    2

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.
    Turn the Rotary encoder to select the TUNER mode, and
    then press ENTER.
    BLUETOOTH  GENERAL  AUDIO  DISPLAY  TUNER 
    iPod & USB

    3
    4

    Turn PTY31 (Emergency Broadcast) reception ON/OFF.

    1
    2

    Turn the Rotary encoder to select the RDS REG mode, and
    then press ENTER.
    Turn the Rotary encoder to select ON or OFF.
    In the OFF mode, the unit automatically keeps receiving the
    related local RDS station.

    5

    Setting PTY31 (Emergency Broadcast)
    reception

    • Press  to return to the previous mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    Turn the Rotary encoder to select the TUNER mode, and
    then press ENTER.
    BLUETOOTH  GENERAL  AUDIO  DISPLAY  TUNER 
    iPod & USB

    3
    4

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.

    Notes

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.

    Turn the Rotary encoder to select ALARM, and then press
    ENTER.
    Turn the Rotary encoder to select ON or OFF.
    If you set to ON, emergency broadcasts are received regardless
    of source. “ALARM” is displayed during reception.

    5

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.
    When an emergency broadcast is received, the volume level will
    be automatically changed to the memorized level in the traffic
    information mode. For details, refer to “Receiving Traffic
    Information” on page 12.

    PI SEEK Setting

    Notes

    1
    2

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.
    Turn the Rotary encoder to select the TUNER mode, and
    then press ENTER.
    BLUETOOTH  GENERAL AUDIO  DISPLAY  TUNER 
    iPod & USB

    3
    4
    5

    Turn the Rotary encoder to select the PI SEEK mode, and
    then press ENTER.
    Turn the Rotary encoder to select ON or OFF.
    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.

    Notes
    • Press  to return to the previous mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    • Pressing  during the procedure will return to the previous mode.
    • If no operation is performed for 60 seconds in the SETUP mode, the
    setting mode is cancelled.

    Receiving Traffic Information

    1
    2

    Press and hold TA for at least 2 seconds so that the “TA”
    indicator lights up.
    Press  or  to select your desired traffic information
    station.
    When a traffic information station is tuned in, the “TP” indicator
    lights up.
    Traffic information is heard only when it is being broadcast. If
    traffic information is not being broadcast, the unit is set in the
    standby mode. When a traffic information broadcast begins, the
    unit automatically receives it and the display shows “T INFO”.
    When the traffic information broadcast is over, the unit will
    automatically set in the standby mode.

    Notes
    • If the traffic information broadcast signal falls below a certain level, the
    unit remains in the receiving mode for 1 minute. If the signal remains
    below a certain level for over 1 minute, the “TA” indicator blinks.
    • If you do not want to listen to the traffic information being received,
    lightly press  or  to skip that traffic information message. The
    TA mode will remain in the ON position to receive the next traffic
    information message.
    • If the volume level is changed while receiving traffic information, the
    changed volume level will be memorized. When traffic information is
    received next time, the volume level will be automatically adjusted to
    the level memorized.
    • In the TA mode, the SEEK tuning selects only the TP stations.

    12-EN



  • Page 13

    PTY (Programme Type) Tuning

    3

    Press and hold TA for at least 2 seconds to deactivate
    the Traffic Information mode.
    The “TA” indicator goes out.

    1
    2

    Press and hold FUNC.VIEW for at least 2 seconds so that
    the  indicator lights up.
    Press 3PTY to activate the PTY mode, while the unit is in
    Radio (FM receiving) mode.
    The Programme Type of the station being currently received will
    be displayed for 5 seconds.
    If there is no receivable PTY broadcast, “NO PTY” will be
    displayed for 5 seconds.
    If no RDS station can be received, the display shows “NO PTY”.
    Note
    • If no operation is performed for 5 seconds after pressing 3PTY, the
    PTY mode will be automatically cancelled.

    3

    Press  or  within 5 seconds after activating the
    PTY mode to choose the desired programme type while
    the PTY (programme type) is being displayed.

    Priority News
    This function allows you to preset to give priority to the News
    programme. You will never miss the News programme as the unit
    automatically gives priority to the News programme whenever it begins
    broadcasting, and interrupts the programme you are currently listening.
    This feature is functional when your unit is set to a mode other than the
    LW and MW modes.

    1
    2

    Press 3PTY within 5 seconds after selecting the
    programme type to start searching for a station in the
    selected programme type.
    The chosen programme type display blinks during searching
    and lights when a station is found.
    If no PTY station is found, “NO PTY” will be displayed for 5
    seconds.

    5

    Press and hold FUNC.VIEW for at least 2 seconds to
    activate the normal mode.

    Press 2NEWS to activate the PRIORITY NEWS mode.
    To disable the PRIORITY NEWS function, press 2NEWS.

    Each press scrolls the programme type by one.

    4

    Press and hold FUNC.VIEW for at least 2 seconds to
    activate the function mode while the unit is in Radio (FM
    receiving) mode.

    Note
    • In the PRIORITY NEWS function, unlike in the TA function, the
    volume does not increase automatically.

    3

    Press and hold FUNC.VIEW for at least 2 seconds to
    activate the preset mode, while the unit is in Radio (FM
    receiving) mode.
    The  indicator goes out.

    Note
    • Operate the unit while the  indicator lights up. If no operation is
    performed for 5 seconds, the  indicator goes out.

    The  indicator goes out.

    Note

    Displaying Radio Text

    • Operate the unit while the  indicator lights up. If no operation is
    performed for 5 seconds, the  indicator goes out.

    Text messages from a radio station can be displayed.

    Receiving Traffic Information While Playing
    CD or Radio

    1
    2

    Press VIEW while receiving FM in the radio mode to select
    the Radio Text display.
    The display will change every time the button is pressed.
    For details, refer to “Displaying the Text” on page 19.

    Press and hold TA for at least 2 seconds so that the “TA”
    indicator lights up.
    Press  or  to select a traffic information station if
    necessary.
    When a traffic information broadcast starts, the unit
    automatically mutes the CD player or the regular FM broadcast.
    When the traffic information broadcast finishes, the unit
    automatically returns to the original source play before the
    traffic information broadcast began.
    When traffic information stations cannot be received:
    In the CD mode:
    When the TP signal can no longer be received, the traffic
    information station of another frequency will be selected
    automatically.

    Note
    • The receiver is equipped with the EON (Enhanced Other Networks)
    function in order to keep track of additional alternate frequencies to
    the AF list. If the station being received does not broadcast the traffic
    information, the receiver automatically tunes in the related station that
    broadcasts the traffic information when it occurs.

    13-EN



  • Page 14

    *1 Only a track is repeatedly played back.
    *2 Only files in a folder are repeatedly played back. (MP3/WMA/
    AAC mode only)

    CD/MP3/WMA/AAC
    2
    SOURCE/ 




    To cancel repeat play, select (off) with the above
    procedure.

    Rotary encoder

    M.I.X. (Random Play)

    1

    Press 5s.
    The songs are played back in random sequence.
    s*1  s ALL*2  (off )  s





    *1 Only files in a folder are played back in random sequence.
    (MP3/WMA/AAC mode only)
    *2 The tracks/files are played back in random sequence.

    4 5

    2

    To cancel M.I.X. play, select (off) with the above procedure.

    Playback

    1

    Searching for CD Text
    Insert a disc with the label side facing up.
    The disc will be pulled into the unit automatically.

    On discs utilizing CD Text, songs can be searched and played by using
    their recorded titles. For discs without CD Text, searches are made using
    the track numbers associated with each song.

    1

    Press ENTER during play.
    This will set the search mode, and the “” indicator lights up.

    2

    Turn the Rotary encoder to select the desired track, and
    then press ENTER.
    This will play the selected track.

    Note
    • When a disc is already inserted, press SOURCE to switch to the
    DISC mode.

    2
    3

    While playing back MP3/WMA/AAC, press  or  to select
    the desired folder.
    Press  or  to select the desired track (file).
    Pressing and holding  or  will fast backward/fast
    forward track continuously.

    4

    Folder/File Name Search (concerning MP3/
    WMA/AAC)
    Folder and file names may be searched and displayed during playback.

    Folder Name Search mode

    To eject the disc, press .

    Notes
    • Do not remove a CD during its eject cycle. Do not load more than one
    disc at a time. A malfunction may result from doing either.
    • The “” indicator lights up when a disc is inserted.
    • Three-inch (8 cm) CDs can not be used.
    • Any file protected by DRM (Digital Rights Management) copy
    protection, cannot be played back on this unit.
    • The track display for MP3/WMA/AAC data playback is the file
    numbers recorded on the disc.
    • The playback time may not be correctly displayed when a VBR
    (Variable Bit Rate) recorded file is played back.

    Repeat Play

    1

    • Press  in the search mode to cancel. Or, the search mode is cancelled
    if no operation is performed for 60 seconds.
    • When CD Text Search is made during M.I.X. play, the M.I.X. play
    mode will be cancelled.

    To pause playback, press .
    Pressing  again will resume playback.

    5

    Notes

    Press a 4.
    The song is played back repeatedly.
    a*1  a*2  (off )  a

    14-EN

    1

    During MP3/WMA/AAC playback, press ENTER to
    activate the search mode.
    The “” indicator lights up.

    2
    3
    4

    Turn the Rotary encoder to select Folder Name Search
    mode, and then press ENTER.
    Turn the Rotary encoder to select the desired folder.
    Press and hold ENTER for at least 2 seconds to play
    back the first file in the selected folder.

    Notes
    • Press and hold  for at least 2 seconds in the search mode to cancel.
    Or, the search mode is cancelled if no operation is performed for
    60 seconds.
    • To search for files in the Folder Name Search mode, press ENTER.
    Files in the folder may be searched.



  • Page 15

    • Press  to exit Folder Name Search mode in step 3 in order to select
    File Name Search mode.
    • The root folder is displayed as “\ROOT”.
    • When Folder Name Search is made during M.I.X. play, the M.I.X. play
    mode will be cancelled.

    File Name Search mode

    1

    During MP3/WMA/AAC playback, press ENTER to
    activate the search mode.
    The “” indicator lights up.

    2
    3
    4

    Turn the Rotary encoder to select File Name Search mode,
    and then press ENTER.
    Select the desired file by turning the Rotary encoder.
    Press ENTER to play back the selected file.

    Notes
    • Press and hold  for at least 2 seconds in the search mode to cancel.
    Or, the search mode is cancelled if no operation is performed for
    60 seconds.
    • Press  in the search mode to return to the previous mode.
    • When File Name Search is made during M.I.X. play, the M.I.X. play
    mode will be cancelled.

    Quick Search

    What is AAC?
    AAC is the abbreviation for “Advanced Audio Coding,” and is a basic
    format of audio compression used by MPEG2 or MPEG4.
    Method for creating MP3/WMA/AAC files
    Audio data is compressed using software with MP3/WMA/AAC codecs.
    For details on creating MP3/WMA/AAC files, refer to the user’s manual
    for that software.
    MP3/WMA/AAC files that are playable on this device have the file
    extensions “mp3” / “wma” / “m4a”. Files with no extension cannot be
    played back (WMA ver. 7.1, 8 and 9 are supported). Protected files are
    not supported, neither are raw AAC files (using the “.aac” extension).
    There are many different versions of the AAC format. Confirm that the
    software being used conforms to the acceptable formats listed above.
    It’s possible that the format may be unplayable even though the
    extension is valid.
    Playback of AAC files encoded by iTunes is supported.
    Supported playback sampling rates and bit rates
    MP3
    Sampling rates:
    Bit rates:

    48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
    12 kHz, 11.025 kHz, 8 kHz
    8 - 320 kbps

    WMA
    Sampling rates:
    Bit rates:

    48 kHz, 44.1 kHz, 32 kHz
    48 - 192 kbps

    AAC
    Sampling rates:
    Bit rates:

    48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
    12 kHz, 11.025 kHz, 8 kHz
    16 - 320 kbps

    This device may not play back correctly depending on sampling rates.

    You can search for tracks (files).

    1

    Press and hold ENTER for at least 2 seconds in the CD/
    MP3/WMA/AAC mode to activate Quick Search mode.
    The “” indicator lights up.

    2

    Turn the Rotary encoder to select a desired track (file),
    and then press ENTER.
    The selected track is played back immediately.

    Note
    • Press  in the search mode to cancel. Or, the search mode is cancelled
    if no operation is performed for 10 seconds.

    About MP3/WMA/AAC
    CAUTION
    Except for private use, duplicating audio data (including MP3/
    WMA/AAC data) or distributing, transferring, or copying it,
    whether for free or for a fee, without permission of the copyright
    holder is strictly prohibited by the Copyright Act and by
    international treaty.
    What is MP3?
    MP3, whose official name is “MPEG Audio Layer 3,” is a compression
    standard prescribed by the ISO, the International Standardization
    Organization and MPEG which is a joint activity institution of the IEC.
    MP3 files contain compressed audio data. MP3 encoding is capable of
    compressing audio data at extremely high ratios, reducing the size of
    music files to as much as one-tenth their original size. This is achieved
    while still maintaining near CD quality. The MP3 format realises such
    high compression ratios by eliminating the sounds that are either
    inaudible to the human ear or masked by other sounds.

    ID3 tags/WMA tags
    This device supports ID3 tag v1 and v2, and WMA tag.
    If tag data is in an MP3/WMA/AAC file, this device can display the title
    (track title), artist name, and album name ID3 tag/WMA tag data.
    This device can only display single-byte alphanumeric characters (up to
    30 for ID3 tags and up to 15 for WMA tags) and the underscore. For
    non-supported characters, “NO SUPPORT” is displayed.
    If information contains characters other than ID3 tag information, the
    audio file may not be played back.
    The tag information may not be correctly displayed, depending on the
    contents.
    Producing MP3/WMA/AAC discs
    MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW
    using CD-R writing software. A disc can hold up to 510 files/folders
    (including Root Folders), and the maximum number of folders is 255.
    Playback may not be performed if a disc exceeds the limitations
    described above.
    Media supported
    The media that this device can play back are CD-ROMs, CD-Rs, and
    CD-RWs.
    Corresponding File Systems
    This device supports discs formatted with ISO9660 Level 1 or Level 2.
    Under the ISO9660 standard, there are some restrictions to remember.
    The maximum nested folder depth is 8 (including the root directory).
    The number of characters for a folder/file name is limited.
    Valid characters for folder/file names are letters A-Z (all caps), numbers
    0-9, and ‘_’ (underscore).
    This device also can play back discs in Joliet, Romeo, etc., and other
    standards that conform to ISO9660. However, sometimes the file
    names, folder names, etc., are not displayed correctly.
    Formats supported
    This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD
    (CD-Extra) and Multi-Session.
    This device cannot correctly play back discs recorded with Track At
    Once or packet writing.

    What is WMA?
    WMA, or “Windows Media™ Audio,” is compressed audio data.
    WMA is similar to MP3 audio data.

    15-EN



  • Page 16

    Order of files
    Files are played back in the order that the writing software writes them
    to the disc. Therefore, the playback order may not be what is expected.
    Verify the writing order in the software’s documentation. The playback
    order of the folders and files is as follows.

    Sound Setting
    AUDIO/SETUP

    Rotary encoder

    Root folder

    Adjusting Subwoofer Level/Bass Level/Mid
    Level/Treble Level/Balance (Between Left
    and Right)/Fader (Between Front and Rear)/
    AUX Mix Level/Loudness/Defeat

    1

    Press AUDIO repeatedly to choose the desired mode.
    Each press changes the mode as follows:

    Folder

    SUBW*1  BASS*2  MID*2  TREBLE*2  BAL  FAD 
    AUX MIX*3  LOUD*2  DEFEAT  VOLUME  SUBW

    MP3/WMA/AAC File

    *1 When the subwoofer mode is set to OFF, its level cannot be
    adjusted, refer to “Turning Subwoofer ON/OFF” on page 18.
    *2 Adjustable only when DEFEAT is OFF.
    *3 Adjustable only when AUX MIX is ON (refer to “Setting the
    AUX MIX” on page 21).

    * The folder No./ folder Name will not be displayed if no readable file is
    contained in the folder.

    Terminology
    Bit rate
    This is the “sound” compression rate specified for encoding. The higher
    the bit rate, the higher the sound quality, but also the larger the files.
    Sampling rate
    This value shows how many times per second the data is sampled
    (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
    the sound is sampled (recorded) 44,100 times per second. The higher
    the sampling rate, the higher the sound quality, but also the larger the
    volume of data.
    Encoding
    Converting music CDs, WAVE (AIFF) files, and other sound files into the
    specified audio compression format.
    Tag
    Song information such as track titles, artist names, album names, etc.,
    written into MP3/WMA/AAC files.
    Root folder
    The root folder (or root directory) is found at the top of the file system.
    The root folder contains all folders and files. It is created automatically
    for all burned discs.

    Subwoofer

    0 ~ +15

    Bass level

    -7 ~ +7

    Mid level

    -7 ~ +7

    Treble level

    -7 ~ +7

    Balance

    L15 ~ R15

    Fader

    R15 ~ F15

    AUX Mix level

    0 ~ 15

    Loudness

    ON/OFF

    Defeat

    ON/OFF

    Volume

    0 ~ 35

    Notes
    • If no operation is performed for 5 seconds, the unit automatically
    returns to normal mode.
    • Loudness introduces a special low- and high-frequency emphasis at low
    listening levels. This compensates for the ear’s decreased sensitivity to
    bass and treble sound.

    2

    Turn the Rotary encoder until the desired sound is
    obtained in each mode.
    By setting DEFEAT ON, previously adjusted level settings of
    BASS, MID, and TREBLE will return to the factory defaults.

    16-EN



  • Page 17

    Sound Setting
    You can flexibly customize the unit to suit your own preference and
    usage. From the AUDIO SETUP menu, Audio Setting can be modified.

    2
    3

    2

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.
    Turn the Rotary encoder to select AUDIO, and then press
    ENTER.
    BLUETOOTH  GENERAL  AUDIO  DISPLAY  TUNER 
    iPod & USB

    3

    Turn the Rotary encoder to select the desired bass
    bandwidth.
    WIDE 0.50  MEDIUM 1.00  MEDIUM 1.50 (Initial setting) 
    NARROW 2.00

    Changes the boosted bass bandwidth to wide or narrow. A wider setting
    will boost a wide range of frequencies above and below the centre
    frequency. A narrower setting will boost only frequencies near the
    centre frequency.

     Setting the Bass Centre Frequency (CENTER FRQ)
    Turn the Rotary encoder to select the desired bass centre
    frequency.

    Turn the Rotary encoder to select the desired sound
    setting menu, and then press ENTER.

    60 (Hz)  80 (Hz)  100 (Hz) (Initial setting)  120 (Hz)

    FACTORY EQ*1/*2  3BAND EQ*1/*3  HPF*1  SUBWOOFER 
    SUBW LPF*4  SUBW PHASE*4  SUBW SYS*4

    *1 Adjustment cannot be performed when DEFEAT is set to ON.
    *2 Any changes made to either FACTORY EQ or 3BAND EQ are
    reflected in the others’ settings.
    *3 In step 3, three sound adjustment items (Bass, Mid and Treble)
    can be selected in 3BAND EQ mode, turn the Rotary encoder
    to select the desired item, and then press ENTER to continue
    to step 4.
    *4 These functions are inoperable when Subwoofer is set to OFF.

    4
    5

    Emphasises the displayed bass frequency ranges.

     Setting the Bass Level
    Turn the Rotary encoder to select the desired bass level
    (-7~+7)*.
    You can emphasise or weaken the bass level.
    * The adjustment can also be made by pressing AUDIO. Refer to
    “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
    Balance (Between Left and Right)/Fader (Between Front and
    Rear)/AUX Mix Level/Loudness/Defeat” on page 16.

    Turn the Rotary encoder to change the setting, and then
    press ENTER.
    (e.g. Select SUBWOOFER ON or SUBWOOFER OFF)

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.

    Setting the Mid Control

    1

    Notes
    • Pressing  returns to the previous Sound menu mode.
    • If no operation is performed for 60 seconds, Sound menu mode is
    cancelled.

    Equalizer Presets (FACTORY EQ)
    10 typical equalizer settings are preset at the factory for a variety of
    musical source material. USER settings are created in the 3BAND EQ
    mode.
    USER  FLAT (Initial setting) POPS  ROCK  NEWS  JAZZ
     ELEC DANCE  HIP HOP  EASY LIS  COUNTRY 
    CLASSICAL

    Adjusting the Parametric Equalizer Curve
    (3BAND EQ)
    You can modify the Equalizer settings to create a response curve more
    appealing to your personal taste. The setting of Bass, Mid and Treble can
    be adjusted in this mode.

    Setting the Bass Control

    1

    After selecting BASS from the 3BAND EQ adjustment
    mode, turn the Rotary encoder to select the desired Bass
    setting item, and then press ENTER.
    WIDTH (Q)  CENTER FRQ  LEVEL

    Press  to return to the previous step.

     Setting the Bass Bandwidth (WIDTH (Q))

    Use steps 1 to 5 to select the category you wish to modify. For
    details on how to change each setting, see the following
    sections below.

    1

    Turn the Rotary encoder to select the desired setting
    value, and then press ENTER.

    After selecting MID from the 3BAND EQ adjustment mode,
    turn the Rotary encoder to select the desired Mediant
    setting item, and then press ENTER.
    WIDTH (Q)  CENTER FRQ  LEVEL

    2
    3

    Turn the Rotary encoder to select the desired setting
    value, and then press ENTER.
    Press  to return to the previous step.

     Setting the Mid Bandwidth (WIDTH (Q))
    Turn the Rotary encoder to select the desired Mid
    bandwidth.
    WIDE 0.75  MEDIUM 1.00  MEDIUM 1.25  NARROW 1.50
    (Initial setting)

     Setting the Mid Centre Frequency (CENTER FRQ)
    Turn the Rotary encoder to select the desired Mid centre
    frequency.
    500 (Hz)  1.0k (Hz) (Initial setting)  1.5k (Hz)  2.5k (Hz)

     Setting the Mid Level
    Turn the Rotary encoder to select the desired Mid level (-7
    ~ +7)*.
    You can emphasise or weaken the Mid level.
    * The adjustment can also be made by pressing AUDIO. Refer to
    “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
    Balance (Between Left and Right)/Fader (Between Front and
    Rear)/AUX Mix Level/Loudness/Defeat” on page 16.

    17-EN



  • Page 18

    Setting the Treble Control

    1
    2
    3

    Adjusting the Low Pass Filter

    After selecting TREBLE from the 3BAND EQ adjustment
    mode, turn the Rotary encoder to select the desired
    Treble setting item, and then press ENTER.

    The Low Pass Filter on this unit can be adjusted to suit your personal
    taste.

    WIDTH (Q)  CENTER FRQ  LEVEL

     Setting item: SUBW LPF

    Turn the Rotary encoder to select the desired setting
    value, and then press ENTER.
    Press  to return to the previous step.

     Setting the Treble Bandwidth (WIDTH (Q))
    Turn the Rotary encoder to select the desired treble
    bandwidth.
    WIDE 0.75  NARROW 1.25 (Initial setting)

     Setting the Treble Centre Frequency (CENTER FRQ)
    Turn the Rotary encoder to select the desired treble
    centre frequency.
    7.5k (Hz)  10.0k (Hz) (Initial setting)  12.5k (Hz)  15.0k (Hz)

    Setting contents:
    OFF (Initial setting) / LPF 60 (Hz) / LPF 80 (Hz) / LPF 120 (Hz) /
    LPF 160 (Hz)
    All frequencies lower than the selected cutoff are output.

    Setting the Subwoofer Phase
    The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
    SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
    encoder. Depending on the installation location of your subwoofer, one
    of these settings may sound better than the other.

     Setting item: SUBW PHASE
    Setting contents:
    NORMAL (Initial setting) / REVERSE

    Setting the Subwoofer System

     Setting the Treble Level
    Turn the Rotary encoder to select the desired treble level
    (-7~+7)*.
    You can emphasise or weaken the treble level.
    * The adjustment can also be made by pressing AUDIO. Refer to
    “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
    Balance (Between Left and Right)/Fader (Between Front and
    Rear)/AUX Mix Level/Loudness/Defeat” on page 16.

    Adjusting the High Pass Filter
    The High Pass Filter on this unit can be adjusted to suit your personal
    taste. This feature works best when used in conjunction with a
    subwoofer.

     Setting item: HPF
    Setting contents:
    OFF (Initial setting) / 60 (Hz) / 80 (Hz) / 120 (Hz) / 160 (Hz)
    All frequencies above the selected cutoff are output.

    Turning Subwoofer ON/OFF
    When the subwoofer is on, you can adjust the subwoofer output level
    (refer to “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
    Balance (Between Left and Right)/Fader (Between Front and Rear)/
    AUX Mix Level/Loudness/Defeat” on page 16).

     Setting item: SUBWOOFER
    Setting contents:
    ON (Initial setting) / OFF
    ON:
    The subwoofer signal is output from the Subwoofer RCA
    Connectors (refer to “Connections” on page 44).
    OFF:
    No subwoofer signal is output from the Subwoofer RCA
    Connectors (refer to “Connections” on page 44).

    18-EN

    When the subwoofer is on, you can select either SYS 1 or SYS 2 for the
    desired subwoofer effect.

     Setting item: SUBW SYS
    Setting contents:
    SUBW SYS 1 / SUBW SYS 2 (Initial setting)
    SUBW SYS 1:
    Subwoofer level changes according to the main volume setting.
    SUBW SYS 2:
    Subwoofer level change is different from the main volume setting.
    For example, even at low volume settings, the subwoofer is still
    audible.



  • Page 19

    Other Functions
    SOURCE/

    About the indication display
    When displaying Text, the following indicators are lit according to the
    mode.
    Indicator/
    Mode

    CD Mode

    MP3/WMA/
    AAC/USB
    AUDIO Mode

    iPod/iPhone/BT
    AUDIO Mode





    Folder Name*2
    being displayed



    *1





    Artist Name
    being displayed

    Artist Name*1
    being displayed



    Text (Disc
    Name*3) being
    displayed

    Album Name*1
    being displayed

    Album Name*1
    being displayed



    Text (Track
    Name*3) being
    displayed

    Song Name*1 /
    File Name
    being displayed

    Song Name*1
    being displayed

    VIEW

    Displaying the Text
    Text information, such as the disc name and the track name, will be
    displayed if playing a CD text compatible disc. It is also possible to
    display the folder name, the file name and the tag, etc., while playing
    MP3/WMA/AAC files.

    Press VIEW.

    *1 Tag information:
    If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
    displayed.
    *2 The root folder is displayed as “\ROOT”.
    *3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/
    “TRACK TEXT” is displayed.

    About “Text”

    The display will change every time the button is pressed.
    Note
    • When the TEXT SCR is set to SCR MANUAL, press and hold  for at
    least 2 seconds, the current text will be scrolled one time (except Radio
    mode).
    The display in Radio mode:
    If there is PS (Programme Service Name)
    PS (Programme Service Name)  PTY (Programme Type) 
    RADIO TEXT  PS (Programme Service Name)
    If there is no PS (Programme Service Name)
    FREQUENCY  PTY (Programme Type)  RADIO TEXT 
    FREQUENCY

    Text compatible CDs contain text information such as the disc name and
    track name. Such text information is referred to as “text”.

    Notes
    • Some characters may not be displayed correctly with this device,
    depending on the character type.
    • “NO SUPPORT” is displayed when the desired text information cannot
    be displayed on this unit.
    • The text or tag information may not be correctly displayed, depending
    on the contents.

    The display in CD mode:
    TRACK NO./ELAPSED TIME  TEXT (DISC NAME)*1  TEXT
    (TRACK NAME)*1  TRACK NO./ELAPSED TIME
    The display in MP3/WMA/AAC mode:
    FILE NO./ELAPSED TIME  (FOLDER NO./FILE NO.)*2  FOLDER
    NAME  FILE NAME  ARTIST NAME*3  ALBUM NAME*3 
    SONG NAME*3  FILE NO./ELAPSED TIME
    The display in BLUETOOTH Audio mode:
    BT A/ELAPSED TIME*4  ARTIST NAME  ALBUM NAME 
    SONG NAME  BT A/ELAPSED TIME

    *1 Displayed during playback of a disc with CD text.
    *2 Only for MP3/WMA/AAC disc mode.
    *3 ID3 tag/WMA tag
    If an MP3/WMA/AAC file contains ID3 tag/WMA tag
    information, the ID3 tag/WMA tag information is displayed
    (e.g., song name, artist name, and album name). All other
    tag data is ignored.
    *4 Depending on the connected mobile phone, the elapsed time
    may not be displayed.

    19-EN



  • Page 20

    Using the Front AUX Input Terminal

    SETUP

    Connect a portable music player, etc. by simply connecting it to the
    input on the front panel. An optional adapter cable is required (standard
    RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini-phono plug).

     /TA
    AUDIO/SETUP Rotary encoder

    Press SOURCE, and select the AUXILIARY mode to
    listen to the portable device.
    Portable player, etc.

    Main unit

    SOURCE/

    or

    Optional adapter cable (RCA pin
    plugs [red, white] 3.5ø miniplugs)
    or (3.5ø miniplugs).

    Setting
    You can flexibly customize the unit to suit your own preferences and
    usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
    etc., can be modified.
    Use steps 1 to 5 to select one of the SETUP modes to modify.
    See the applicable section below for details about the
    selected SETUP item.

    Notes
    • This function is available only when AUX SETUP is set to ON. For
    details, refer to “Setting the AUX SETUP Mode” on page 21.
    • Do not connect a Flash Memory Device and an AUX Input Terminal
    connector at the same time.



    1
    2

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.
    Turn the Rotary encoder to select the desired item, and
    then press ENTER.
    BLUETOOTH*1  GENERAL  AUDIO*2  DISPLAY  TUNER 
    iPod & USB

    (e.g. Select GENERAL)
    GENERAL:
    PLAY MODE  AUX SETUP  AUX NAME*3  AUX GAIN*3 
    AUX MIX*3  CYRILLIC  POWER IC  DEMO
    DISPLAY:
    ILLUMINATI  SCROLLTYPE  TEXT SCR
    TUNER:
    RDS REG*4  PI SEEK*5  ALARM*6  FM-LEVEL
    iPod & USB:
    USB SEARCH  USB SKIP  VTUNER  VTUNER VL*7

    *1
    *2
    *3
    *4
    *5
    *6

    Refer to “BLUETOOTH SETUP” on page 24.
    Refer to “Sound Setting” on page 17.
    Displayed only when AUX SETUP is set to ON.
    Refer to “Receiving RDS Regional (Local) Stations” on page 12.
    Refer to “PI SEEK Setting” on page 12.
    Refer to “Setting PTY31 (Emergency Broadcast) reception” on
    page 12.
    *7 Displayed only when VTUNER is set to ON.

    3

    Select an Item with the Rotary encoder, and then press
    ENTER.
    (e.g. Select POWER IC)

    4

    Turn the Rotary encoder to change the setting, and then
    press ENTER.
    (e.g. Select POWER IC ON or POWER IC OFF.)

    20-EN



  • Page 21

    5

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.
    Notes
    • Press  to return to the previous mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    General Setting
    GENERAL is selected on the setup main menu in step 2.

    Playing MP3/WMA/AAC Data (PLAY MODE)
    This unit can play back CDs containing both CD and MP3/WMA/AAC
    data (created in Enhanced CD (CD Extra) format). However, in some
    situations, playback of an enhanced CD may be difficult. In this case,
    you can choose to play back the CD data session only. When a disc
    contains both CD and MP3/WMA/AAC data, playback starts from the
    CD data portion of the disc.

     Setting item: PLAY MODE
    Setting contents:
    CD-DA (Initial setting) / CDDA/MP3
    CD-DA:
    Only the CD data in Session 1 can be played back.
    CDDA/MP3:
    CD data, MP3/WMA/AAC files in mixed mode, and multi-session
    discs can be played back.

    Setting the AUX MIX
    With an external audio device connected to the front AUX terminal of
    CDE-135BT, the voice from external device will be mixed with the radio
    or CD, etc. play.

     Setting item: AUX MIX
    Setting contents:
    OFF (Initial setting) / ON
    Notes
    • Noise may be more noticeable when this function is not used. In this
    case, the OFF setting is recommended.
    • This setting is effective when AUX SETUP is ON.

    Setting the Language (CYRILLIC)
    Set the language to be displayed on the unit.

     Setting item: CYRILLIC
    Setting contents:
    OFF (Initial setting) / ON
    OFF:
    English, Latin character
    ON:
    Russian, English

    Note
    • Refer to the table below for the Russian display on this unit.

    Note
    • Perform this setting before inserting a disc. If a disc has already been
    inserted, remove it first.

    Setting the AUX SETUP Mode
    You can input the audio of an external device, (such as a Portable audio
    player) to the AUX connector of this unit.

     Setting item: AUX SETUP

    D:
    C:
    D C

    D C

    D C

    D C

    Setting contents:
    ON (Initial setting) / OFF
    ON*:
    Set to ON when a portable device is connected. If SOURCE is
    pressed and AUX is selected, the sound of the portable device is
    input to the unit.

    * You can change the AUX NAME display when AUX SETUP is
    set to ON. Press ENTER when AUX SETUP is set to ON,
    and select AUX NAME by turning the Rotary encoder, then
    press ENTER. After that, turn the Rotary encoder to
    select the desired AUX NAME.
    Note
    • When the PORTABLE is set, PMD is displayed on the unit.
    OFF:
    When set to OFF, AUX source cannot be selected.

    Setting the AUX Level (AUX GAIN)

    Connecting to an External Amplifier (POWER IC)

    After setting to ON in “Setting the AUX SETUP Mode”, this setting can
    be carried out.

    When an external amplifier is connected, sound quality can be
    improved by reducing the current draw of the built-in amplifier.

     Setting item: AUX GAIN

     Setting item: POWER IC

    Setting contents:
    LOW (Initial setting) / HIGH
    LOW:
    Decreases the external input audio level.

    Setting contents:
    ON (Initial setting) / OFF
    ON:
    The speakers are driven by the built-in amplifier.

    HIGH:
    Increases the external input audio level.

    21-EN



  • Page 22

    OFF:
    Use this mode when the line output of this unit is used to drive an
    external amplifier. In this setting, the head unit’s internal amplifier
    is turned OFF and cannot drive speakers.
    ON:

    TYPE3:
    When the colour of SOURCE/ button is amber, the colour of the
    other is red.
    TYPE4:
    When the colour of SOURCE/ button is red, the colour of the
    other is red.

    Speakers

    Scroll Type Setting

    SPEAKER
    RIGHT FRONT

    Front
    Right

    Choose from two scrolling methods. Select the type you prefer.

     Setting item: SCROLLTYPE
    SPEAKER
    RIGHT REAR

    Rear
    Right

    SPEAKER
    LEFT REAR

    Rear
    Left

    SPEAKER
    LEFT FRONT

    Front
    Left

    OFF:

    Amplifier

    Front
    Left
    Front
    Right
    Rear
    Left

    Amplifier

    Rear
    Right

    Setting contents:
    SCR TYPE1 / SCR TYPE2 (Initial setting)
    SCR TYPE1:
    The characters scroll from right to left, a single character at a time.
    SCR TYPE2:
    Words are built up from left to right, a single character at a time.
    When the display is filled, it is cleared and the remaining words are
    displayed the same way until all words of the title have been
    shown.

    Scroll Setting (TEXT SCR)
    This CD player can scroll the disc and track names recorded on
    CD-TEXT discs, as well as the text information of MP3/WMA/AAC
    files, folder names and tags.

     Setting item: TEXT SCR
    Setting contents:
    SCR AUTO / SCR MANUAL (Initial setting)
    SCR AUTO:
    The current text information of CD, folder, tag, etc. is scrolled
    automatically.
    SCR MANUAL:
    The display is scrolled when a disc is loaded or when a track is
    changed, etc.

    Note
    Note
    • No sound is produced by the system when the power output is set to
    OFF.

    Demonstration
    This unit has a demonstration feature for the display.

     Setting item: DEMO
    Setting contents:
    DEMO ON / DEMO OFF (Initial setting)
    Note
    • To quit Demo mode, set to DEMO OFF.

    Display Setting
    DISPLAY is selected on the setup main menu in step 2.

    • The unit scrolls CD text names, folder names, file names or tag display.

    Tuner Setting
    TUNER is selected on the setup main menu in step 2.

    Adjusting Source Signal Levels (FM-LEVEL)
    If the difference in volume level between the CD player and FM radio is
    too great, adjust the FM signal level.

     Setting item: FM-LEVEL
    Setting contents:
    FM-LV HIGH (Initial setting) / FM-LV LOW

    USB and vTuner Setting
    “iPod & USB” is selected on the setup main menu in step 2.

    Changing Lighting Colour
    You can change the lighting colour of the unit’s buttons.

     Setting item: ILLUMINATI
    Setting contents:
    ILUM TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4
    TYPE1:
    When the colour of SOURCE/ button is blue, the colour of the
    other is red.
    TYPE2:
    When the colour of SOURCE/ button is green, the colour of the
    other is green.

    22-EN

    Setting the USB Search Mode
    This unit allows searching MP3 Tag info or file names on Flash Memory
    devices. Only compatible audio files are displayed during the search.

     Setting item: USB SEARCH
    Setting contents:
    TAG (Initial setting) / FILE NAME
    TAG:
    When TAG is selected, you can use Playlists/Artists/Albums/Songs/
    Genres/Composers/Folders/Files search mode to narrow searches.



  • Page 23

    FILE NAME:
    When FILE NAME is selected, you can search a folder/file as search
    files on PC.

    BT Hands Free Calling

    Notes
    • After the above setting, turn the ignition key off (ACC OFF) and on
    again (ACC ON).
    • For search mode details, refer to “Searching for a desired Song” on
    page 30.

    AUDIO/SETUP
       Rotary encoder

    Setting the USB Skip function
    During (FILE NAME) searching, you can skip over designated folders/
    files by pressing . For example, if you select 10FILE in the (FILE
    NAME) searching mode, by pressing  you can skip forward 10 folders/
    files from the current folder/file; by pressing  you can skip backward
    10 folders/files from the current folder/file. If the folders/files searched
    are less than the assigned skipped-over ones, pressing  will skip to
    the first or last folder/file.


    SOURCE/

    1


    VIEW

    2
    Preset buttons
    (1 through 6)

     Setting item: USB SKIP
    Setting contents:
    10FILE (Initial setting) / 20FILE / 50FILE / 100FILE

    Setup Before Using

    Setting the vTuner Source
    You can select to turn on or off the vTuner source.

     Setting item: VTUNER
    Setting contents:
    ON (Initial setting) / OFF
    ON:
    The vTuner source can be switched by pressing SOURCE/.
    OFF:
    The vTuner source is not available.

    Setting the vTuner Volume
    When VTUNER is ON, you can adjust the vTuner source volume
    memory.
    Use this function to match the vTuner source volume to other sources,
    as closely as possible.

     Setting item: VTUNER VL
    Setting contents:
    -5dB ~ +5dB (The initial value is 0 dB)

    About BLUETOOTH
    BLUETOOTH is a wireless technology allowing communication
    between a mobile device or personal computer over short distances.
    This enables a hands-free call or data transmission between
    BLUETOOTH compatible devices. BLUETOOTH transmission is
    available in the unlicensed 2.4 GHz spectrum if the distance between
    devices is within 10 meters. For details, refer to the BLUETOOTH
    Home page (http://www.bluetooth.com).

    Notes
    • Depending on the BLUETOOTH version, a BLUETOOTH compatible
    device may not be able to communicate with this unit.
    • Proper function of this unit with all BLUETOOTH compatible devices
    is not guaranteed. For handling of the BT compatible device, consult
    your ALPINE dealer or ALPINE website.
    • Depending on the surroundings, BLUETOOTH wireless connection
    may be unstable.
    • When you place a call, or perform setup operations, be sure to stop your
    car in a safe place.
    • Depending on the connected BLUETOOTH compatible device(s), the
    function may differ. Also refer to the Owner’s Manual of the connected
    device(s).
    • When you search for this unit using the BLUETOOTH compatible
    phone, the unit name is displayed as “Alpine CD Receiver”.

    Before Using BLUETOOTH Function
    Before using the BLUETOOTH function, the following settings need to
    be made.

    Set “HFP” or “AUDIO” to ON when you want to use
    Hands-Free phone or BT Audio function. Refer to “Setting
    the BLUETOOTH Connection (BT IN)” on page 24.
    Note
    • Before using BLUETOOTH function, it must be paired with this unit.
    Refer to “How to connect to a BLUETOOTH compatible device
    (Pairing)” on page 23.

    How to connect to a BLUETOOTH
    compatible device (Pairing)
    For details on the control from a BLUETOOTH compatible device, refer
    to the Owner’s Manual of the BLUETOOTH compatible device.

    23-EN



  • Page 24

    *1 The items are not displayed during a phone call.
    *2 The items are not displayed if “HFP” is set to OFF. Refer to
    “Setting the BLUETOOTH Connection (BT IN)” on page 24.

    Pairing a BLUETOOTH compatible device with
    SSP (Secure Simple Pairing)

    1
    2

    Using your BLUETOOTH compatible device, select the
    “Alpine CD Receiver” for pairing.
    Turn the Rotary encoder to change the head unit display
    from “PAIR NO” to “PAIR YES”, and then press ENTER.
    If “PAIR NO” is selected, the connection will be cancelled.

    3

    If the pairing was successful, “CONNECTED” is displayed
    for a few seconds. The head unit then returns to its
    previous state.

    4
    5

    2

    Press and hold AUDIOSETUP for at least 2 seconds.
    The SETUP mode is cancelled.

    Notes
    • Press  to return to the previous mode.
    • Pressing and holding  for at least 2 seconds will return to normal
    mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    Pairing a BLUETOOTH compatible device without
    SSP (Secure Simple Pairing)

    1

    Turn the Rotary encoder to change the settings.

    Setting the BLUETOOTH Connection (BT
    IN)

    Input the PIN code (“0000”) in a BLUETOOTH compatible
    device.

    With BLUETOOTH technology, you can place a hands-free call by a
    BLUETOOTH-equipped mobile phone.
    Audio information of a BLUETOOTH compatible mobile phone, a
    portable audio player, etc., is controllable/playable wirelessly from this
    unit.

    Note

     Setting item: BT IN

    Using your BLUETOOTH compatible device, select the
    “Alpine CD Receiver” for pairing.

    • The PIN code is fixed as “0000”.

    3

    If the pairing was successful, “CONNECTED” is displayed
    for a few seconds. The head unit then returns to its
    previous state.

    Notes
    • If the connection is unsuccessful, “FAILED” is displayed.
    • After a successful pairing, the two devices should re-pair automatically
    whenever the vehicle’s ignition is turned ON. However, the re-pairing
    may fail. If the auto re-pairing fails, try to pair manually.
    • Set “VISIBLE M” to VISI M ON to enable this unit to be recognised by a
    BLUETOOTH compatible device, refer to “Setting the Visible Mode” on
    page 25.
    • You can also manually pair the BLUETOOTH devices from this unit.
    For details, refer to “Pairing a BLUETOOTH Device from the unit” on
    page 25.

     Further setting items: HFP / AUDIO
    Setting contents:
    OFF / ON (Initial setting)

    Hands-Free Phone setting (HFP)
    ON:
    Select when you want to pair your BLUETOOTH compatible phone
    with this unit.
    OFF:
    Hands-Free Phone function is not used.

    BLUETOOTH Audio setting (AUDIO)
    ON:
    Select when you want to use BLUETOOTH Audio function.
    OFF:
    BLUETOOTH Audio function is not used.

    BLUETOOTH SETUP

    Setting the BLUETOOTH Device
    The following steps 1 to 5 are common to the various BLUETOOTH
    functions. For details, refer to each individual function.

    Note
    • Set “HFP” or “AUDIO” to ON, and then perform BLUETOOTH
    SETUP operation. Refer to “Setting the BLUETOOTH Connection (BT
    IN)” on page 24.

    1
    2

     Setting item: PAIRED DEV

    1

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.
    Turn the Rotary encoder to select “BLUETOOTH”, and then
    press ENTER.
    The BLUETOOTH setup mode is activated.

    3

    Select one of 3 connected BLUETOOTH compatible devices that you
    previously registered.

    Turn the Rotary encoder to select the desired items and
    then press ENTER.
    BLUETOOTH:
    BT IN*1  PAIRED DEV  VISIBLE M*1  SEARCH DEV*1 
    CALL SOUND*2  CALLER ID*2  PB UPDATE*2  BT MENU*2
     PB ORDER*2  AUTO ANS*2  SEV NAME*2  SPEAKER SL*2
     FW VERSION  FW UPDATE*1

    24-EN

    2

    Turn the Rotary encoder to select a BLUETOOTH
    compatible device you want to use (you want to change
    connection) and then press ENTER.
    Turn the Rotary encoder to select “CONNECT” to connect
    the selected device.
    The connected device is marked with “l”. Select “DISCONNECT”
    to disconnect this device. Select “CLEAR” when you want to clear
    the device from the device list.

    Notes
    • If the connection is successfully changed, “CONNECTED” is displayed
    for 2 seconds and the  indicator lights up, then the display returns to
    the SETUP screen.
    • If all the 3 positions have been registered, you cannot register the 4th
    device. To register another device, you need to delete one of the devices
    from position 1 to 3 first.



  • Page 25

    Setting the Visible Mode
    You can set whether this unit can be recognised or not from a
    BLUETOOTH compatible device. Normally set this to VISI M ON.

     Setting item: VISIBLE M
    Setting contents:
    VISI M ON (Initial setting) / VISI M OFF
    VISI M ON:
    Enable recognition of this unit from the BLUETOOTH compatible
    device.
    VISI M OFF:
    Disable recognition of this unit from the BLUETOOTH compatible
    device.

    Pairing a BLUETOOTH Device from the
    unit
    If your BLUETOOTH device is not immediately pairing, the head unit
    can perform a search. The search can find paired or unpaired devices.

     Setting item: SEARCH DEV

    1

    When SEARCH DEV is selected and “SEARCHING” is
    displayed, the search gets started.
    Note
    • The “SEARCHING” operation can be stopped by pressing .

    2
    3

    Turn the Rotary encoder to select the name of the device
    to be connected from the Device Search list and then
    press ENTER.
    If this unit is successfully connected to a BLUETOOTH
    compatible device, “CONNECTED” is displayed, and then
    the unit returns to normal mode.
    Depending on the mobile phone, it may be necessary to input a
    passcode. In this case, “CODE 0000” is displayed. Input the
    passcode “0000” in the BLUETOOTH compatible device to make
    the pairing. After the pairing is completed, the unit will
    automatically connect to the BLUETOOTH compatible device. If
    you input the wrong passcode or the communication fails,
    “FAILED” is displayed.

    Setting the BLUETOOTH sound quality
    Change these settings to improve the quality of the outgoing or
    incoming call.

     Setting item: CALL SOUND
     Further setting items: VOL LV ADJ / AUTO SET

    Adjusting the volume (VOL LV ADJ)
    You can emphasize or weaken the volume level of the Phone call, the
    ring tone and the microphone input to fit your own preferences.

    Setting contents:
    PHONE TALK:
    -5 dB ~ +5 dB
    RING TONE:
    -5 dB ~ +5 dB
    MIC GAIN:
    -5 dB ~ +5 dB

    Sound Auto setting (AUTO SET)
    Depending on your calling environment, choose one of the settings
    below which gives the best sound quality.

    Setting contents:
    TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
    TYPE1:
    Standard Mode (recommended)
    TYPE2:
    Enhances the noise reduction
    TYPE3:
    Enhances the echo-cancel
    TYPE4:
    Enhances both noise reduction and echo-cancel
    TYPE5:
    Weakens both noise reduction and echo-cancel

    Note
    • The functions below are designed to improve the sound quality of the
    outgoing call.
    Noise reduction: This function can reduce the road noise, but excessive
    enhancement may affect the sound quality of the call.
    Echo-cancel: This function can reduce the echo, but excessive
    enhancement may affect the sound quality of the call.

    Setting the caller information display ON/
    OFF
    You can choose whether to use this function according to the following
    setting.

     Setting item: CALLER ID
    Setting contents:
    ON (Initial setting) / OFF
    If you want to keep the ID information of the caller from others, set this
    item to OFF. Depending on the stored ID information, while you are
    dialing a number, only telephone number will be displayed or telephone
    name will be displayed as “ID UNSENT”; During a call, “NO NAME”
    will be displayed; Or while a call is dialing in, only telephone number
    will be displayed or telephone name will be displayed as “NO NAME”.

    Phone Book Auto Update ON/OFF
    You can set whether to update the phone book automatically.

     Setting item: PB UPDATE
    Setting contents:
    ON (Initial setting) / OFF
    ON:
    When the mobile phone reconnects with this unit, the phone
    book will update.
    OFF:
    The phone book will not update.

    Setting the BLUETOOTH Menu language
    The BLUETOOTH Menu can be switched within 6 languages.

     Setting item: BT MENU
    Setting contents:
    ENGLISH (Initial setting) / DEUTSCH / FRANCAIS / ESPANOL /
    ITALIANO / NEDERLANDS

    25-EN



  • Page 26

    Changing the Phone book List Order
    The phone book is listed alphabetically by the first letter of FIRST or
    LAST NAME.
    Listing by FIRST NAME is the default but LAST NAME can be selected.

     Setting item: PB ORDER
    Setting contents:
    FIRST NAME (Initial setting) / LAST NAME
    Note
    • “WAITING” will be displayed while the Phone book order is switching.
    You can quit the “WAITING” screen to perform other operations by
    pressing  when the ordering is still in progress. At this time, the
    phone book is not accessible. In addition, the ordering may affect the
    playback of BT AUDIO.

    Setting the Received Calls automatically
    (Auto Answer)
    When a call is received, you can set whether to receive it automatically
    or not.

     Setting item: AUTO ANS
    Setting contents:
    AT ANS ON / AT ANS OFF (Initial setting)
    AT ANS ON:
    When a call is received, it is answered automatically after about 5
    seconds.
    AT ANS OFF:
    When a call is received, it is not answered automatically. Press f
    to receive the call.

    Note
    • If the received call setting on the mobile phone is on, the call will be
    answered automatically even though this setting is set to OFF.

    Displaying the phone service provider
    name
    The service provider name of the connected BLUETOOTH compatible
    device will be displayed. If a BLUETOOTH compatible device is not
    connected, “ID UNSENT” will be displayed.

     Setting item: SEV NAME
    Note
    • Depending on the character type some phone service provider name
    cannot be displayed. “ID UNSENT” will be displayed.

    Selecting the output speaker
    Choose the speaker in your vehicle from which you want to hear the call.

    Displaying the firmware version
    The current firmware version will be displayed.

     Setting item: FW VERSION

    Updating the firmware
    Future BLUETOOTH firmware updates may become available for
    phone interoperability.
    For information to update your BLUETOOTH firmware, please visit
    your local Alpine web site or choose your country from Alpine Europe
    top page (http://www.alpine-europe.com).

     Setting item: FW UPDATE
    Setting contents:
    UPDATE NO (Initial setting) / UPDATE YES

    Hands-Free Phone Control
    About the Hands-Free Phone
    Hands-free calls are possible when using a HSP (Head Set Profile) and
    HFP (Hands-Free Profile) compatible mobile phone with this unit.

    Notes
    • Avoid performing a hands-free call in heavy traffic or on narrow or
    winding streets.
    • Close the windows while calling to reduce background noise.
    • If both calling parties are using hands-free devices, or the call is made in
    a noisy location, difficulty hearing the other person’s voice is normal.
    • Depending on telephone line conditions or certain mobile devices used,
    voices may sound unnatural.
    • When using a microphone, speak as directly as you can into the
    microphone to pick up the best sound quality.
    • Certain mobile phone features are dependent on the capabilities and
    settings of your service provider’s network. Additionally, certain features
    may not be activated by your service provider, and/or the provider’s
    network settings may limit the feature’s functionality.
    Always contact your service provider about feature availability and
    functionality.
    All features, functionality, and other product specifications, as well as
    the information contained in the Owner’s Manual are based upon the
    latest available information and are believed to be accurate at the time
    of printing.
    Alpine reserves the right to change or modify any information or
    specifications without notice or obligation.

    Answering a Call
    Incoming calls are announced by the received call ring tone and a
    displayed message (PHONE).

     Setting item: SPEAKER SL
    Setting contents:
    ALL (Initial setting) / FRONT-L / FRONT-R / FRONT-LR
    ALL:
    The sound be output from all of speakers in car.
    FRONT-L:
    The sound only be output from the front left speaker.
    FRONT-R:
    The sound only be output from the front right speaker.
    FRONT-LR:
    The sound be output from the front left and front right speaker.

    26-EN

    Press f.
    The call starts.

    Notes
    • When “AUTO ANS” is set to AT ANS ON, you can receive a call
    automatically. Refer to “Setting the Received Calls automatically (Auto
    Answer)” on page 26.
    • While calling, the source sound on the unit is muted. After calling,
    playback will resume.



  • Page 27

    Hanging up the Telephone
    Press f.
    The call finishes.

    Note
    • You can also hang up the call by pressing and holding  for at least 2
    seconds.

    Calling
    Call History is recorded for the last dialled/received/missed calls (80
    records for each). There are various ways of making calls based on the
    “Calling”. The following steps 1 to 5 are common to the various ways of
    making these calls. For details, refer to each individual category for
    making calls.

    1

    Press and hold f for at least 2 seconds.

    5

    Press ENTER.
    The selected telephone number will be called.
    If one name has several numbers registered in the telephone
    book, press ENTER after selecting the name*, then turn the
    Rotary encoder to choose the desired number and press
    ENTER, the telephone will be called. Press and hold
    ENTER for at least 2 seconds after selecting the name, the
    default number of the name will be called. Depending on the
    connected mobile phone, this function may not be performed.
    * If the name cannot be recognized, default number will be
    displayed.

    Notes
    • Press  to return to the previous mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.
    • The names registered in the telephone book are displayed. If the name is
    not registered, a number is displayed. If both name and number cannot
    be displayed, “ID UNSENT” will be displayed.

    The outgoing method list is displayed.

    2

    Turn the Rotary encoder to select the outgoing mode.
    Setting contents:
    When “BT MENU” is set to “ENGLISH”.
    VOICE DIAL / DIALLED / RECEIVED / MISSED / PHONE
    BOOK
    VOICE DIAL:
    Voice dial operation
    DIALLED:
    Dialled history
    RECEIVED:
    Received history
    MISSED:
    Missed incoming history
    PHONE BOOK:
    Mobile phone book

    When “BT MENU” is set to “DEUTSCH”.
    SPRACHWAHL / GEWAEHLT / ANGENOMMEN /
    VERPASST / TEL-BUCH
    When “BT MENU” is set to “FRANCAIS”.
    CP-VOCALE / COMPOSES / RECUS / MANQUES /
    REPERTOIRE
    When “BT MENU” is set to “ESPANOL”.
    MARC VOCAL / REALIZADAS / RECIBIDAS / PERDIDAS /
    AGENDA
    When “BT MENU” is set to “ITALIANO”.
    C VOCALE / EFFETTUATE / RICEVUTE / PERSE / RUBRICA
    When “BT MENU” is set to “NEDERLANDS”.
    VOICE DIAL / GEKOZEN / ONTVANGEN / GEMISTE / TEL
    BOEK
    Note
    • For details, refer to “Setting the BLUETOOTH Menu language” on
    page 25.

    3

    Press ENTER.
    The outgoing mode is activated, and each mode list is displayed.
    Note

    4

    Voice Dial Operation
    You can make a call using voice commands.

     Setting item: VOICE DIAL
    When the VOICE DIAL mode is activated “SPEAK” is
    displayed. Say the telephone number*, name* you want
    to call into the microphone.
    * This message depends on the voice tag prestored in the mobile
    phone.

    Notes
    • You can perform this operation only when a voice dial compatible
    mobile phone is connected. If the mobile phone is not compatible with
    the voice dial, “NO SUPPORT” is displayed for 2 seconds.
    • The Voice Dial function performance depends on the recognition range
    of the mobile phone and mounting location of the microphone. Please
    pay attention when the microphone is mounted.
    • Voice dial operation depends on the function of the mobile phone. For
    details, refer to the Owner’s Manual of the mobile phone.
    • If a called person that you say is not found, “NO CALL” is displayed for
    2 seconds.

    Redialing a Number In Outgoing History
    Previously dialled telephone numbers are stored in dialled calls history.
    You can redial a number by searching from dialled calls history.

     Setting item: DIALLED

    Dialing a Number In Incoming History
    Telephone numbers from received calls are stored in the Received List.
    You can redial these numbers by searching here.

     Setting item: RECEIVED

    Dialing a Number In Incoming Missed Call
    History

    • It may take some time for the list to be displayed, and also directly after
    connection, the list may not be brought up to date.

    Telephone numbers for received calls that are missed, are stored in the
    Missed List. You can redial these numbers by searching here.

    Turn the Rotary encoder to select a name or a telephone
    number from the list.

     Setting item: MISSED

    Note
    • You can use Phone book alphabet search function to search a name or
    number from Phone Book. For details, refer to “Phone book Alphabet
    Search Function” on page 28.

    27-EN



  • Page 28

    Dialing a Number In The Phone Book
    Up to 1,000 names (at most 5 telephone numbers for each name) are
    downloadable from a mobile phone. Dial a call by selecting a person
    from the phone book list.

     Setting item: PHONE BOOK
    Notes
    • The order of the list display depends on the setting of “PB ORDER”
    (refer to “Changing the Phone book List Order” on page 26).
    • If the call history or phone book of the mobile phone is added or deleted
    while it is connected to the unit, the list displayed on the unit may not
    be brought up to date. If it is not updated, you cannot correctly place a
    call.
    • You can display the information of a number stored in phone book by
    pressing VIEW. Each press changes the display as Name  Telephone
    NO.  Telephone label*  Name
    If the information can not be obtained, “NO NAME”, “NO NUMBER”
    or “NO LABEL” will display.
    * The telephone label of a number depends on the number information
    stored in Phone book of the mobile phone, which includes 5
    types-GENERAL, MOBILE, HOME, OFFICE, and OTHER.

    Phone book Alphabet Search Function

    • You can search for a name by its first letter, first two letters or first three
    letters. Press ENTER after entering the desired number of letters. A
    list displays the names beginning with the entered letter(s).

    Call waiting function
    If a second call is received during a current call, you can have the first
    caller wait momentarily while you take the second call. When you are
    finished with one call, you can switch to the other one.

    If a second call is received during the current call (call1),
    the information of second caller (call2) is displayed
    instead of the current caller’s name. Press 2, the call
    waiting mode is activated.
    In this case, call1 is on hold, while you take call2.

    Notes
    • In the call waiting mode, press 1 or 2 to switch between the current call
    and the person on hold.
    • In the call waiting mode, press and hold 1 or 2 for at least 2 seconds to
    hang up call1 or call2, and the other call will be answered
    automatically.
    • In the call waiting mode, you can press VIEW to change the display
    between waiting number (1or 2) and caller name.

    Preset a number in the Phone Menu
    (Shortcut dial)

    You can select the first three letters to search for a desired name in
    phone book list by using the Phone book alphabet search function.
    For example:
    Searching a name “Michael James”
    The following example explains how the search is performed.
    Depending on the setting in PB ORDER (refer to “Changing the Phone
    book List Order” on page 26), the phone book is listed in first name or
    last name order. Please search for the first name or last name according
    to the setting.

    1

    Press  or  while in the phone book list, the phone book
    alphabet search mode is activated.
    The letter selection list is displayed.

    2

    Turn the Rotary encoder to select the first letter (e.g. M),
    and then press .
    The letter selection list is displayed.

    3

    Turn the Rotary encoder to select the second letter (e.g. I),
    and then press .
    The letter selection list is displayed.

    4

    Turn the Rotary encoder to select the third letter (e.g. C),
    and then press ENTER.

    Assign numbers that you dial frequently to presets for quick recall. You
    can assign up to six frequently called phone numbers to number presets.

    Select a number you want to preset from the Phone Menu
    list (PHONE BOOK, DIALLED, etc.). Press and hold any one
    of the preset buttons (1 through 6) as the one that you
    wish to store the number for at least 2 seconds.
    The phone number you selected is stored in presets.

    Notes
    • If the name has several numbers registered in the phone book, press
    ENTER after selecting the name. Turn the Rotary encoder to
    choose the desired number. Press and hold any one of the preset
    buttons (1 through 6) for at least 2 seconds. The selected number is
    stored as a preset number.
    • A total of 18 phone numbers can be stored in the preset memory ( 6
    numbers for each mobile phone in the paired device list). If a mobile
    phone is deleted from the paired device list, the stored preset numbers of
    this mobile phone are deleted, even when it is paired again.
    • If you store a phone number in a preset with a previously stored
    number, the current number will be cleared and replaced by the new
    one.

    The names stored in phone book which begin with “MIC” are
    searched.

    5

    Turn the Rotary encoder to select the desired name (e.g.
    Michael James), and then press ENTER to make the
    call.

    Notes
    • The Alphabet Search Function is only applicable to English alphabetic
    characters, when “CYRILLIC” is set to OFF; Phone book alphabet
    search function is also applicable to Russian letters when “CYRILLIC”
    is set to ON. Refer to “Setting the Language (CYRILLIC)” on page 21.
    • During steps 2 to 4, you can also press  or  to select the desired letter.
    • If the selected name has several numbers registered in phone book, you
    need to turn the Rotary encoder to select the desired number, and
    then press ENTER.
    • Press  in step 3 or 4 to delete the current entry and return to the
    previous step.

    28-EN

    Dialing the preset number

    1

    Press any one of the preset buttons (1 through 6) that has
    had a number stored in the phone mode.
    The information (name/number) stored in the preset station is
    displayed.

    2

    Press ENTER.
    The stored preset number is dialed directly.

    Adjusting the volume when receiving a
    Call
    While calling, you can adjust the volume.

    Turn the Rotary encoder to adjust the volume.



  • Page 29

    Note

    USB Memory (optional)

    • You may need to increase volume from your regular audio listening
    source level. However, increasing the volume excessively may result in
    feedback. Feedback is directly related to the volume. Turning down the
    volume as low as acceptable, will reduce it. Positioning the microphone
    in a direction away from the main car speakers (e.g. clipped on sun
    visor) may also reduce feedback at high volume.

       Rotary encoder

    Muting the microphone input quickly
    (Voice Mute)
    While calling, activating the Voice Mute function will instantly mute the
    microphone input. Your voice will not be heard by the caller.

    While calling, press  to mute the microphone input.


     BAND/F/R
    SOURCE/

    Press  again will bring the microphone input back to its
    previous volume level.

    VIEW

    4 5
    Preset buttons
    (1 through 6)

    Call Switching Operation
    While making a call, this function allows you to initiate the transfer of
    the audio between the mobile phone and the speakers in the car.

    While calling, press and hold ENTER or  for at
    least 2 seconds to switch the call sound between the unit
    and mobile phone.
    Note
    • Depending on the mobile phone, this operation may not be performed.

    BLUETOOTH Audio Operation

    Connecting USB Memory (optional)
    If a USB Memory device is connected to the unit, MP3/WMA/AAC files
    can be played back.

    Note
    • When TAG is set in “Setting the USB Search Mode” (refer to “Setting the
    USB Search Mode” on page 22), BANKING is displayed for several
    seconds each time a Flash Memory device is connected or Ignition is
    cycled.
    There are two USB connectors on this unit, you can choose to connect a
    USB Memory to Front USB Connection Terminal or Rear USB Connector.

    Audio information of a BLUETOOTH compatible mobile phone, a
    portable player, etc., is controllable/playable wirelessly* from this unit.
    * To play back audio, a mobile phone or a portable player conforming to
    A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/
    Video Remote Control Profile) is required.
    Not all functions work with all devices.

    Notes

    When connect USB Memory to Front USB
    Connection Terminal

    1
    2

    • Set “AUDIO” to ON when you want to use BLUETOOTH Audio
    function. Refer to “Setting the BLUETOOTH Connection (BT IN)” on
    page 24.
    • During a call, sound on the BLUETOOTH audio source is muted.
    • If you operate the Hands-free phone (e.g. searching in the phonebook)
    while using the BLUETOOTH Audio function, BLUETOOTH Audio
    playback may be affected.

    Open the cover of the USB Connection Terminal.
    Connect the USB Memory directly to the USB Connection
    Terminal, or via the USB cable.
    This unit

    USB Connection Terminal
    USB Memory
    (sold separately)

    or

    Recalling the BLUETOOTH Audio Mode
    Press SOURCE/ to select the BT AUDIO mode.

    Selecting the desired Song

    USB Memory
    (sold separately)

    Cable (sold
    separately)

    Press .
    Returns the beginning of the song being played back.

    Remove USB Memory from Front USB
    Connection Terminal

    Press .
    Forwards the next song.
    Pressing and holding  or  will fast backward/fast
    forward track continuously.

    Pausing

    1
    2

    Carefully, pull out the USB Memory from the USB cable or
    the USB Connection Terminal.
    Close the cover of the USB Connection Terminal.

    Press .
    A playback stops. Pressing again will resume a playback.

    29-EN



  • Page 30

    Notes
    • Change to a source other than the USB Memory mode, then remove the
    USB Memory. If the USB Memory is removed in the USB Memory
    mode, data may be damaged.
    • When removing USB Memory, pull it out straight.
    • If sound is not output or USB Memory is not recognized even when
    USB Memory is connected, remove USB Memory once, and then
    reconnect.
    • After removing the USB Memory, close the cover of the USB Connection
    Terminal to prevent dust or foreign objects from entering and causing a
    malfunction.
    • On how to connect a USB Memory to Rear USB Connector, refer to
    “Rear USB Memory Connection (sold separately)” on page 43.

    Playback

    1

    Press SOURCE to select the USB mode.
    Depending on which USB Connector you used, press BAND/F/R
    to switch USB source between FRONT and REAR.

    2

    Press  or  to select the desired track (file).
    Pressing and holding  or  will fast backward/fast
    forward track continuously.

    3

    To pause playback, press .
    Pressing  again will resume playback.

    Using the USB Memory Banking Function
    When a USB Memory is connected, the follows description is available
    only when TAG is set in “Setting the USB Search Mode” (refer to
    “Setting the USB Search Mode” on page 22).
    What is a Bank?
    A bank is a unit of up to 1,000 songs, which is stored in memory.
    “BANKING” refers to the grouping of songs available in USB Memory, in
    banks of 1,000 songs each. However, unless the following estimates are
    followed, the total number of songs stored could be less.
    Playlists: 20 (32 characters; 64 bytes)
    Genres: 10 (32 characters; 64 bytes)
    Composers: 30 (32 characters; 64 bytes)
    Artists: 30 (32 characters; 64 bytes)
    Albums: 100 (32 characters; 64 bytes)
    Titles: 1,000 (32 characters; 64 bytes)
    Folders: 100 (32 characters; 64 bytes)
    Files: 1,000 (32 characters; 64 bytes)
    File Paths: 1,000 (128 characters; 256 bytes)

    Notes
    • Any file protected by DRM (Digital Rights Management) copy
    protection, cannot be played back on this unit.
    • The playback time may not be correctly displayed when a VBR
    (Variable Bit Rate) recorded file is played back.
    • If there is tag information, artist name/album name/track name is
    displayed.
    • If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
    the ID3 tag/WMA tag information is displayed (e.g., song name, artist
    name, and album name). All other tag data is ignored.
    • “NO SUPPORT” is displayed when text information is not compatible
    with this unit.
    • Before disconnecting USB Memory, be sure to change to another source
    or set to pause.
    • Press VIEW to switch the display. For details, refer to “Displaying the
    Text” on page 19.

    Searching for a desired Song

    About Banking
    While a bank is being built up, “BANKING” is displayed. Banking occurs
    whenever a USB Memory device is connected or after power to the
    head unit turns on.
    It can take anywhere from a few seconds to up to several minutes for
    banking to complete. This depends on the number of files and folders
    in USB Memory.

    You can select to search a song by Tag information or (FILE NAME)
    mode. Before you search a song, select your desired search mode in
    “Setting the USB Search Mode” (refer to “Setting the USB Search Mode”
    on page 22).

    Available operations while Banking
    • During Banking, the information display changes so the VIEW
    operation is not available.
    • With a song playing, Regular fast-forwarding and next song selection is
    available.
    • While Banking, the song playback order may differ from the song order
    in the USB Memory device.
    • Searching is not recommended during the Banking process as the
    database is under construction at this time, and malfunction may result
    in some cases.

    Before performing the following procedures, make sure TAG is selected
    in “Setting the USB Search Mode” (refer to “Setting the USB Search
    Mode” on page 22).
    A Flash Memory Device can contain hundreds of songs. By using file tag
    information and keeping these songs organized in playlists, this unit’s
    search functions will ease song searches.
    Each music category has its own individual hierarchy. Use the Bank*1/
    Playlists/Artists/Albums/Songs/Genres/Composers/Folders/Files search
    mode to narrow searches based on the table below.

    This unit has a BANK function that automatically divides every 1,000
    songs stored in USB Memory into individual banks to make searching
    and playing back a song easier. A maximum of 1,000 songs for one bank
    can be stored according to the order stored in USB Memory. A
    maximum of 20 banks (20,000 songs) can be recognized.

    Searching by Tag information

    Hierarchy
    1

    Hierarchy
    2

    Hierarchy
    3

    Hierarchy
    4

    Hierarchy
    5

    Bank*1

    Playlist

    Song





    Bank*1

    Artist*

    Album*

    Song



    Bank No.

    Song number

    Bank*1

    Album*

    Song





    Bank1

    1~1,000

    Bank*1

    Song







    Bank2

    1,001~2,000

    Bank*1

    Genre*

    Artist*

    Album*

    Song





    Bank*1

    Composer*

    Album*

    Song



    Bank20

    19,001~20,000

    Bank*1

    Folder

    File





    Bank*1

    File







    *1 A maximum of 1,000 songs for one bank can be stored according to
    the order stored in Flash Memory. However, song stored order in bank
    may differ from the song order in the Flash Memory device in some
    case.

    30-EN



  • Page 31

    For example:
    Searching by Artist name
    The following example explains how an Artists search is performed.
    Another search mode can be used for the same operation, although the
    hierarchy differs.

    Searching by artist name

    1
    2
    3

    Press ENTER to activate the search selection mode.
    Turn the Rotary encoder to select a desired Bank, and
    then press ENTER.
    Turn the Rotary encoder to select the Artist search mode,
    and then press ENTER.
    PLAYLIST  ARTIST  ALBUM  SONG  GENRE  COMPOSER
     FOLDER  FILE  PLAYLIST

    4
    5
    6

    • If any one of the preset buttons (1 through 6) is pressed in the
    search mode, a search can be made quickly by skipping to the specified
    location. For details, refer to “Direct Search Function” on page 34.
    • In the Tag search mode, a search can be made quickly by Alphabet
    search function to find the desired artist or song, etc. For details, refer to
    “Alphabet Search Function (Tag search mode only)” on page 32.
    • In the (FILE NAME) search mode, a search can be made quickly by
    USB Skip function to find the desired folder/file. For details, refer to
    “Setting the USB Skip function” on page 23.
    • When searching for a song, artist, etc., in Flash Memory, the display
    order may be incorrect if the character code of the file tag information is
    mixed.

    Repeat Play

    1

    The song is played back repeatedly.

    Turn the Rotary encoder to select the desired Artist, and
    then press ENTER.

    When a song is searched by Tag information
    a*1  a*2  a*3  (off )  a
    When a folder/file is searched by (FILE NAME) mode
    a*1  a*4  (off )  a

    Turn the Rotary encoder to select an album, and then
    press ENTER.

    *1 Only a file is repeatedly played back.
    *2 According to the artist information of the current song, a playlist
    about all the songs with the same artist of the Bank are made
    into a playlist, which then starts to play back.
    *3 According to the album information of the current song, a
    playlist about all the songs with the same album of the Bank are
    made into a playlist, which then starts to play back.
    *4 Only files in a folder are repeatedly played back.

    Turn the Rotary encoder to select a song and press
    ENTER.
    The selected song is played back.

    Searching by (FILE NAME) mode
    Before performing the following procedures, make sure FILE NAME is
    selected in “Setting the USB Search Mode” (refer to “Setting the USB
    Search Mode” on page 22).
    Flash Memory can contain hundreds of songs. By organizing songs by
    folder, you can quickly find a desired folder/file. This operation is
    similar to search a folder/file from PC.

    1
    2

    4

    2

    To cancel repeat play, select (off) with the above
    procedure.
    Note
    • During repeat play, setting M.I.X. to ON will cancel the repeat play.

    Press ENTER to activate the search mode.
    Turn the Rotary encoder to select a desired folder/file.
    When a folder is searched, indicator lights up.
    When a file is searched, indicator lights up.

    3

    Press a 4.

    M.I.X. (Random Play)

    1

    Press 5 s.
    The songs are played back in random sequence.

    Press ENTER to play the selected file or enter the
    selected folder.

    When a song is searched by Tag information
    s*1  s ALL*2  (off )  s

    Press and hold ENTER for at least 2 seconds to play back all
    songs in the selected folder.

    When a folder/file is searched by (FILE NAME) mode
    s*3  s ALL*4  (off )  s

    *1 Song shuffle randomly plays back songs within a selected
    category (playlist, album, etc.). The songs within the category
    are played just once until all songs have been played.
    *2 All songs in the current Bank are played back in random
    sequence. Any one song does not play back again until all songs
    have been played back.
    *3 All songs in the current folder are played back in random
    sequence. Any one song does not play back again until all songs
    have been played back.
    *4 All songs in the Flash Memory are played back in random
    sequence. Any one song does not play back again until all songs
    have been played back.

    If a folder is opened in Step 3, Repeat Steps 2 to 3 until the
    desired folder/file is found.

    Notes
    • In the Tag search mode, after pressing and holding ENTER for at
    least 2 seconds while in each hierarchy (except Song and File hierarchy),
    all songs of the selected hierarchy are played back.
    • Even if the songs belong to the same playlist, they may be saved in
    different BANK.
    • After selecting [ALL] in the Tag search mode with “*”, press and hold
    ENTER for at least 2 seconds to play back all songs in the selected
    search mode.
    • While in the search mode, if you press and hold  for at least
    2 seconds, or no operation is performed for 60 seconds, the search mode
    is cancelled.
    • The root folder of Flash Memory is displayed as “\ROOT”.
    • When the bank is changed during Repeat play, the Repeat play will be
    cancelled.
    • In the search mode, pressing  will return to the previous mode.
    • When search is made during M.I.X. play, the M.I.X. play mode will be
    cancelled.

    2

    To cancel M.I.X. play, select (off) with the above procedure.

    Notes
    • When a song is played back during Random (M.I.X.) play in the USB
    mode, the song can be played back again randomly even if not all songs
    in the current Bank or Flash Memory have been played back.
    • During M.I.X. play, setting repeat play to ON will cancel the M.I.X.
    play.

    31-EN



  • Page 32

    • During repeat play, etc., the track number display for M.I.X. play may
    be incorrect.

    Select Playlist/Artist/Album/Genre/
    Composer/Folder
    Playlist/Artist/Album/Genre/Composer/Folder can be easily changed.
    For example, if you listen to a song from a selected album, the album can
    be changed.

    Press  or  to select the desired Playlist/Artist/Album/
    Genre/Composer/Folder.
    Notes
    • If the song search mode was used to select a song, this function is
    inactive.
    • If an album is selected during an artist search, other albums by that
    artist are searchable.
    • This function is inactive during M.I.X. playback.
    • This function is inactive during RPT ALBUM/RPT ARTIST playback.

    Alphabet Search Function (Tag search mode
    only)
    Quickly find an artist, album, etc. by the first letter in its title or name.

    1
    2

    During Tag search mode, press  or  to activate
    Alphabet Search function.
    Turn the Rotary encoder or press  or  to select the
    desired initial letter (e.g. select “M”), and then press
    ENTER.
    A list which begins with the selected initial letter is searched.

    3

    Turn the Rotary encoder to select the desired item (which
    begins with initial letter “M”), and then press ENTER.
    The item is selected.

    Notes
    • The Alphabet Search Function is only applicable to English alphabetic
    characters.
    • Characters not readable by the head unit cannot be searched.
    • If the Song search mode is activated in Playlist search, this function is
    invalid.

    Quick Search
    You can search for a song from all songs in current bank of Flash
    Memory without selecting an album, artist, etc.

    1
    2

    Press and hold ENTER for at least 2 seconds to activate
    Quick Search mode.
    Turn the Rotary encoder to select a desired track (file).
    The selected track is played back immediately.

    Note
    • Press  in the search mode to cancel. Or, the search mode is cancelled
    if no operation is performed for 10 seconds.

    32-EN

    Search Position Memory
    During playback, you can quickly return to the last-selected hierarchy
    level in the search mode.

    Press .
    The hierarchy you selected last in the search mode is displayed.



  • Page 33

    iPod/iPhone (optional)

    • For clarity in identifying your model of iPod, please see Apple’s own
    document “Identifying iPod models” at
    http://support.apple.com/kb/HT1353
    • This unit does not support video playback from iPod/iPhone, even
    using a video-compatible cable.

       Rotary encoder

    Setting the iPod Control
    When an iPod/iPhone is connected, operate it from its own controls or
    from the head unit.

    Press and hold ENTER for at least 2 seconds to switch
    iPod control mode between HU (HEAD UNIT) and iPod.

     BAND/F/R
    SOURCE/

    VIEW

    4 5
    Preset buttons
    (1 through 6)

    Once the control mode is changed, this will set pause status,
    press  to continue.

    6

    HU (HEAD UNIT):
    Operate the iPod/iPhone via this unit.
    iPod:
    Operate the iPod/iPhone using its own controls. When iPod is
    selected, some functions will not be operable via the head unit.

    Connecting an iPod/iPhone
    An iPod/iPhone can be connected to this unit by using the Interface
    cable for iPod (included with iPod/iPhone). When an iPod/iPhone is
    connected to this unit, you can choose to control the iPod/iPhone using
    its own controls or by the head unit controls. For details, refer to “Setting
    the iPod Control” on page 33.

    Note
    • Depending upon the iPod used, iPod control may not be selectable. Or,
    if iPod is selected, operation must still be from the head unit.

    Playback

    Notes
    • Internet and telephone functions of the iPod touch or iPhone, etc., can
    also be used while connected to this unit. Using these functions will stop
    or pause the currently playing songs. During this time, do not operate
    the unit to avoid a malfunction.
    • If you connect an iPhone to this unit, it can be used as an iPod. If you
    use iPhone as a hands-free phone, use the unit in which the
    BLUETOOTH function is built.
    • There are two USB connectors on this unit, you can choose to connect
    an iPod/iPhone to Front USB Connection Terminal or Rear USB
    Connector. On how to connect an iPod/iPhone to this unit, refer to
    “iPod/iPhone Connection (sold separately)” on page 42.
    • Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to
    high temperature and humidity conditions, and damage may result.

    1

    About iPod/iPhone models usable with this unit
    • Confirmed devices regarding Made for iPod. Correct function of
    earlier versions cannot be guaranteed.
    iPod touch (4th generation): Ver.4.3
    iPod nano (6th generation): Ver.1.0.0
    iPod touch (3rd generation): Ver.4.3
    iPod nano (5th generation): Ver.1.0.2
    iPod classic (160 GB) (Late 2009): Ver.2.0.4
    iPod touch (2nd generation): Ver.4.2.1
    iPod nano (4th generation): Ver.1.0.4
    iPod classic (120 GB): Ver.2.0.1
    iPod touch (1st generation): Ver.3.1.3
    iPod nano (3rd generation): Ver.1.1.3
    iPod classic (80 GB, 160 GB): Ver.1.1.2
    iPod nano (2nd generation): Ver.1.1.3
    • Confirmed devices regarding Made for iPhone. Correct function of
    earlier versions cannot be guaranteed.
    iPhone 4S: Ver.5.0.1
    iPhone 4: Ver.4.2.1
    iPhone 3GS: Ver.4.3
    iPhone 3G: Ver.4.2.1
    iPhone: Ver.3.1.3

    • A song playing on the iPod/iPhone while it is connected to this unit will
    continue to play from where it was paused after disconnection.
    • If you listen to an episode from a selected Podcast or Audiobook, the
    episode can be changed by pressing  or .
    • An episode may have several chapters. The chapter can be changed by
    pressing  or .

    Press SOURCE to switch to the iPod mode.
    Depending on which USB Connector you used, press BAND/F/R
    to switch iPod source between FRONT and REAR.

    2

    Press  or  to select the desired song.
    Pressing and holding  or  will fast backward/fast
    forward the current track.

    3

    To pause playback, press .
    Pressing  again will resume playback.

    Notes

    Searching for a desired Song
    An iPod/iPhone can contain hundreds of songs. By using file tag
    information and keeping these songs organised in playlists, this unit’s
    search functions will ease song searches.
    Each music category has its own individual hierarchy. Use the Playlist/
    Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
    to narrow searches based on the table below.
    Hierarchy 1

    Hierarchy 2

    Hierarchy 3

    Hierarchy 4

    Playlist

    Song





    Artist*

    Album*

    Song



    Album*

    Song





    Song







    Podcast

    Episode





    Genre*

    Artist*

    Album*

    Song

    33-EN



  • Page 34

    Hierarchy 1

    Hierarchy 2

    Hierarchy 3

    Hierarchy 4

    Composer*

    Album*

    Song



    Audiobook







    For example:
    Searching by Artist name
    The following example explains how an ARTIST search is performed.
    Another search mode can be used for the same operation, although the
    hierarchy differs.

    1

    Direct Search Function
    The unit’s direct search function can be used to search for an album,
    song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
    PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
    quickly target any song.

    In the search mode, press any one of the preset buttons (1
    through 6) to quickly skip over a designated percent of
    your song content.

    Press ENTER to activate the search selection mode.
    The “” indicator lights up.

    2

    Song search example:
    If there are 100 songs in your iPod/iPhone, they are divided into 6
    groups using percentages (shown below). These groups are
    assigned to the preset buttons (1 through 6).

    Turn the Rotary encoder to select the ARTIST search
    mode, and then press ENTER.
    PLAYLIST  ARTIST  ALBUM  SONG  PODCAST  GENRE
     COMPOSER  AUDIOBOOK  PLAYLIST

    3
    4
    5

    Example 1:
    Suppose the song you are searching for is located at around the
    middle (50%) of your library: press button 4 to jump to the 50th
    song and turn the Rotary encoder to find the desired song.

    Turn the Rotary encoder to select the desired Artist, and
    then press ENTER.

    Example 2:
    Suppose the song you are searching for is located near the end
    (83%) of your library: press button 6 to jump to the 83rd song
    and turn the Rotary encoder to find the desired song.

    Turn the Rotary encoder to select the desired Album, and
    then press ENTER.
    Turn the Rotary encoder to select the desired Song, and
    then press ENTER.

    All 100 songs (100%)
    0%

    17%

    33%

    50%

    67%

    83%

    Preset
    buttons

    1

    2

    3

    4

    5

    6

    Songs

    1st
    song

    17th
    song

    33rd
    song

    50th
    song

    67th
    song

    83rd
    song

    Notes
    • This function is unavailable when iPod is selected in “Setting the iPod
    Control” (refer to “Setting the iPod Control” on page 33).
    • After pressing and holding ENTER for at least 2 seconds while in
    each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs
    of the selected hierarchy are played back.
    • After selecting [ALL] in the search mode with“*”, press and hold
    ENTER for at least 2 seconds to play back all songs in the iPod/
    iPhone or selected search mode.
    • While in the search mode, if you press and hold  for 2 seconds, or no
    operation is performed for 60 seconds, the search mode is cancelled.
    • In the search mode, pressing  will return to the previous mode.
    • When search is made during M.I.X. play, the M.I.X. play mode will be
    cancelled.
    • When search is made during song downloading on iPhone,
    “UPDATING” will be displayed for a few second and the search mode
    will be cancelled.
    • “NO SONG” will be displayed if there are no songs in the selected
    playlist in the PLAYLIST search mode.
    • “NO PODCAST” will be displayed if there is no podcast data in the
    iPod/iPhone in the PODCAST search mode.
    • “NOAUDIOBOK” will be displayed if there is no audiobook data in the
    iPod/iPhone in AUDIOBOOK search mode.
    • If “iPod name” stored in the iPod/iPhone is selected in the desired
    Playlist search mode, and ENTER is pressed, you can search for all
    songs in the iPod/iPhone. Also, if you press and hold ENTER for at
    least 2 seconds, all songs in the iPod/iPhone are played back.
    • Depending on the iPod/iPhone, podcast search is not supported.
    • If any one of the preset buttons (1 through 6) is pressed in the
    search mode, a search can be made quickly by skipping to the specified
    location. For details, refer to “Direct Search Function” on page 34.
    • During search mode, a search can be made quickly by Alphabet search
    function to find the desired artist or song, etc. For details, refer to
    “Alphabet Search Function” on page 34.

    Note
    • This function is inactive during Alphabet Search mode.

    Select Playlist/Artist/Album/Genre/
    Composer/Episode
    Playlist/Artist/Album/Genre/Composer/Episode can be easily changed.
    For example, if you listen to a song from a selected album, the album can
    be changed.

    Press  or  to select the desired Playlist/Artist/Album/
    Genre/Composer/Episode.
    Notes
    • If the song search mode was used to select a song, this function is
    inactive.
    • If an album is selected during an artist search, other albums by that
    artist are searchable.
    • This function is inactive during shuffle (M.I.X.) playback.

    Alphabet Search Function
    Quickly find an artist, album, etc. by the first letter in its title or name.

    1
    2

    During search mode, press  or  to activate Alphabet
    Search function.
    Turn the Rotary encoder or press  or  to select the
    desired initial letter (e.g. select “M”), and then press
    ENTER.
    A list which begins with the selected initial letter is searched.

    34-EN



  • Page 35

    3

    Turn the Rotary encoder to select the desired item (which
    begins with initial letter “M”), and then press ENTER.

    Repeat Play

    The item is selected.

    Notes
    • The Alphabet Search Function is only applicable to English alphabetic
    characters.
    • While in Alphabet search mode, pressing  will return to the
    previous mode.
    • If the PLAYLIST search mode is used to search for a song, the Alphabet
    search function is inactive in the song search hierarchy.

    Search Position Memory
    During iPod/iPhone playback, you can quickly return to the
    last-selected hierarchy level in the search mode.

    Press .

    Only Repeat One is available for the iPod/iPhone.
    Repeat One:
    A single song is repeatedly played back.

    1

    Press a 4.
    The song is played back repeatedly.
    a*  (off)  a
    * Repeat One.

    2

    To cancel repeat play, select (off) with the above
    procedure.

    Note
    • Depending on the connected iPod, track up/down may be not available
    during Repeat play.

    The hierarchy you selected last in the search mode is displayed.

    Note
    • This function is unavailable when iPod is selected in “Setting the iPod
    Control” (refer to “Setting the iPod Control” on page 33).

    Displaying the Text
    You can display the tag information of a song in the iPod/iPhone.

    Random Play Shuffle (M.I.X.)

    Press VIEW.

    The Shuffle function of the iPod/iPhone is displayed as s on this unit.

    Note

    Each press changes the display.
    • When the TEXT SCR is set to SCR MANUAL, press and hold  for at
    least 2 seconds, the current text will be scrolled one time.
    TRACK NO./ELAPSED TIME  ARTIST NAME*  ALBUM NAME* 
    SONG TITLE*  TRACK NO./ELAPSED TIME

    Shuffle Albums:
    The songs on each album are played back in the order they were
    recorded. Upon completion of all the songs on the album, the next
    album is selected randomly. This continues until all albums have
    been played.
    Shuffle Songs:
    Song shuffle randomly plays back songs within a selected category
    (playlist, album, etc.). The songs within the category are played just
    once until all songs have been played.

    1

    Press 5 s.
    The songs are played back in random sequence.
    s*1  s*2  (off )  s

    * TAG information
    “ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
    information.

    Notes





    Only alphanumeric characters (ASCII) can be displayed.
    The maximum number of characters for the head unit is 128 (128 byte).
    Some characters may not be correctly displayed.
    “NO SUPPORT” is displayed if text information is not supported by the
    unit.

    *1 Shuffle Albums.
    *2 Shuffle Songs.

    2

    To cancel M.I.X. play, select (off) with the above procedure.
    Note
    • If a song is selected in the album search mode before selecting M.I.X.
    play, the songs will not play back randomly even when Shuffle Albums
    is selected.

    Shuffle ALL:
    Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one
    song does not play back again until all songs have been played back.

    1

    Press 6.
    The songs are played back in random sequence.
    s ALL  (off )  s ALL
    * Shuffle ALL.

    2

    To cancel M.I.X. play, select (off) with the above procedure.

    Notes
    • If Shuffle ALL is selected, the selected songs being played back in the
    search mode are cancelled.
    • This function is unavailable when iPod is selected in “Setting the iPod
    Control” (refer to “Setting the iPod Control” on page 33).

    35-EN



  • Page 36

    Note

    vTuner internet radio
    (iPhone) (Optional)

    • The number of stations that can be added to the Favourite List depends
    on the vTuner application.

    Jumping to Favourite station

    SOURCE/
     Rotary encoder

    During vTuner source, press any one of preset buttons (1
    through 6).
    The relevant station (1 through 6) stored in Favourite List begins
    to broadcast and p indicator lights up.

    Notes
    • Preset 1 to 6 are stations stored in the Favourite List in order of 1~6.
    • You can also choose a stored station from FAVORITES search in search
    mode.

    BAND/F/R


    VIEW

    Preset buttons
    (1 through 6)

    vTuner is your guide to Internet streamed media. The vTuner platform
    connects your Internet enabled iPhone to the wide world of streamed
    music, talk, etc.

    Deleting stored station from Favourite List

    1

    When a stored (favourite) station is broadcasting, p indicator
    will light up.

    Notes
    • Some of the vTuner application functionality for iPhone or iPod touch is
    not available when using the CDE-135BT.
    • vTuner is also usable from an iPod touch with Wi-Fi connection.
    • Be aware that the vTuner function will consume your communication
    fee.

    Listening to vTuner

    1
    2

    Launch the vTuner Application on the iPhone.
    Press SOURCE/ to switch to the VTUNER mode.
    Notes
    • Depending on which USB Connector you used, press BAND/F/R to
    switch vTuner source between FRONT and REAR.
    • The vTuner source can be displayed only when VTUNER is set to ON.
    For details, refer to “Setting the vTuner Source” on page 23.
    • When VTUNER VL is set to other than 0 dB in “Setting the vTuner
    Volume” (refer to “Setting the vTuner Volume” on page 23), vTuner
    source volume may be higher (or lower) than other sources.

    3

    To pause playback, press .
    Pressing  again will resume playback.
    If the broadcasting programme is not transmitted by streaming
    media, when playback is continued, it will begin at the position
    it was paused.

    Note

    Tune to a stored (favourite) station.

    2

    Press .
    The p indicator will go off after the station is deleted from
    Favourite List.
    FAIL will be displayed if the station fails to be deleted from
    Favourite List.

    Searching for a Desired Station
    You can display your station list and select stations directly from the
    CDE-135BT.
    Search a station from Favourite list:

    1
    2

    Press /ENTER to activate the Search mode.
    Turn the Rotary encoder to select “FAVORITES”, and then
    press /ENTER.
    The “FAVORITES” search mode is activated and the stored station
    names are listed. The  indicator lights up at this time.

    3

    Turn the Rotary encoder to select the desired station, and
    then press /ENTER.
    vTuner will play that station and p indicator will light up.

    Search by other modes:

    • vTuner audio could drop out in areas with poor phone coverage.

    vTuner provides you many ways to search a station, such as by Genre,
    Location, etc. And some search categories may include many search
    hierarchies. For details, please visit http://www.vtuner.com.

    Storing the desired station to Favourite List
    You can store a station to the Favourite List by following steps.

    1
    2

    Press  when the station you want to store is
    broadcasting.

    3

    The p indicator will light up after the station is added to
    Favourite List successfully.
    FAIL will be displayed if the station fails to be added to Favourite
    List or while the Favourite List is full you want to add station to it.

    4

    36-EN

    Press /ENTER to activate the search mode.
    Turn the Rotary encoder to select the desired search
    category, and then press /ENTER.
    Turn the Rotary encoder to select the desired
    subcategory/station within the selected category, and
    then press/ENTER.
    After step 3 if the  indicator still lights up, repeat
    step 3 until the desired station is searched.



  • Page 37

    Notes
    •  indicator lighting up means there is subcategory during search
    mode.
     indicator lighting up means the current category is last search
    hierarchy.
    • While in the search mode, if you press and hold  for 2 seconds, or no
    operation is performed for 60 seconds, the search mode is cancelled.
    • In the search mode, pressing  will return to the previous search
    hierarchy.
    • Depending on the vTuner application, search category, search hierarchy,
    etc., may differ.
    • During last search hierarchy, press VIEW will change the display.
    • In some cases, certain search mode may not work, or some stations
    cannot play normally.
    • The provided stations are subject to change, please visit the home page
    of vTuner for the latest information.

    Changing the Display
    Press VIEW.
    Station Name

    Genre Name

    Language

    Station Name

    Notes
    • Only alphanumeric characters can be displayed.
    • The maximum number of characters is 128 (128 byte).
    • Some characters may not be correctly displayed.

    Information
    In Case of Difficulty
    If you encounter a problem, please turn the power off, then on again. If
    the unit is still not functioning normally, please review the items in the
    following checklist. This guide will help you isolate the problem if the
    unit is at fault. Otherwise, make sure the rest of your system is properly
    connected or consult your authorized Alpine dealer.

    Basic
    No function or display.
    • Vehicle’s ignition is off.
    – If connected following instructions, the unit will not operate with
    the vehicle’s ignition off.
    • Improper power lead (Red) and battery lead (Yellow) connections.
    – Check power lead and battery lead connections.
    • Blown fuse.
    – Check the fuse of the unit; replace with the proper value if
    necessary.
    • Internal micro-computer malfunctioned due to interference noise
    etc.
    – Press the RESET switch with a ballpoint pen or other pointed
    article.

    Radio
    Unable to receive stations.
    • No antenna or open connection in cable.
    – Make sure the antenna is properly connected;
    replace the antenna or cable if necessary.
    Unable to tune stations in the seek mode.
    • You are in a weak signal area.
    – Make sure the tuner is in the DX mode.
    • If the area you are in is a primary signal area, the antenna may not be
    grounded and connected properly.
    – Check your antenna connections; make sure the antenna is
    properly grounded at its mounting location.
    • The antenna may not be the proper length.
    – Make sure the antenna is fully extended; if broken, replace the
    antenna with a new one.
    Broadcast is noisy.
    • The antenna is not the proper length.
    – Extend the antenna fully; replace it if it is broken.
    • The antenna is poorly grounded.
    – Make sure the antenna is grounded properly at its mounting
    location.

    CD
    CD Player not functioning.
    • Out of operating temperature range +50°C (+120°F) for CD.
    – Allow the vehicle’s interior (or trunk) temperature to cool.
    CD playback sound is wavering.
    • Moisture condensation in the CD Module.
    – Allow enough time for the condensation to evaporate (about
    1 hour).
    CD insertion not possible.
    • A CD is already in the CD player.
    – Eject the CD and remove it.

    37-EN



  • Page 38

    • The CD is being improperly inserted.
    – Make sure the CD is being inserted following instructions in the
    CD Player Operation section.
    Unable to fast forward or backward the CD.
    • The CD has been damaged.
    – Eject the CD and discard it; using a damaged CD in your unit can
    cause damage to the mechanism.
    CD playback sound skips due to vibration.
    • Improper mounting of the unit.
    – Securely re-mount the unit.
    • The disc is very dirty.
    – Clean the disc.
    • The disc has scratches.
    – Change the disc.
    • The pick-up lens is dirty.
    – Do not use a commercially available lens cleaner disc. Consult
    your nearest Alpine dealer.
    CD playback sound skips without vibration.
    • The disc is dirty or scratched.
    – Clean the disc; damaged disc should be replaced.
    Error displays (built-in CD player only).
    • Mechanical error
    – Press . After the error indication disappears, insert the disc
    again. If the above-mentioned solution does not solve the problem,
    consult your nearest Alpine dealer.
    CD-R/CD-RW playback not possible.
    • Close session (finalisation) has not been performed.
    – Perform finalisation and attempt playback again.

    MP3/WMA/AAC
    MP3, WMA or AAC is not played back.
    • Writing error occurred. The MP3/WMA/AAC format is not
    compatible.
    – Make sure the MP3/WMA/AAC has been written in a supported
    format. Refer to “About MP3/WMA/AAC” on page 15, then
    rewrite in the format supported by this device.

    Audio
    The sound is not output from the speakers.
    • Unit has no output signal of the internal amplifier.
    – POWER IC is switched to “ON”, refer to “Connecting to an
    External Amplifier (POWER IC)” on page 21.

    • Mechanism error.
    1 Press the  button and eject the CD.
    If not ejecting, consult your Alpine dealer.
    2 When the error indication remains after ejecting, press the 
    button again.
    If the error indication still does not turn off after pressing the 
    button for a few times, consult your Alpine dealer.
    • When “ERROR” is displayed:
    If the disc cannot be ejected by pressing , press the RESET switch
    (Refer to “Initial System Start-Up” on page 9) and press  again.
    If the disc still cannot be ejected, consult your Alpine dealer.

    • A copy-protected WMA file was played back.
    – You can only play back non-copy-protected files.

    UNSUPPORT
    • A sampling rate/bit rate not supported by the unit is used.
    – Use a sampling rate/bit rate that is supported by the unit.

    Indication for USB Memory

    • Database error or decoder error.
    – You can solve the problem by switching the source.

    • Communication error or boot error, etc.
    – You can solve the problem by reconnecting the Flash Memory or
    changing source.

    • Abnormal current is run to the USB Flash Memory device.
    – You can solve the problem by switching the source.

    iPod
    iPod does not play and no sound is output.
    • The iPod has not been recognised.
    – Reset this unit and the iPod. Refer to “Initial System Start-Up” on
    page 9. To reset the iPod, refer to the Owner’s Manual of the iPod.

    Indication for CD Player

    or
    • No song (file) is stored in the Flash Memory.
    – Connect the Flash Memory device after storing songs (files).

    UNSUPPORT
    • A sampling rate/bit rate not supported by the unit is used.
    – Use a sampling rate/bit rate that is supported by the unit.

    • No CD is inserted.
    – Insert a CD.
    • Although a disc is inserted, “NO DISC” is displayed and the unit does
    not start to play or eject the disc.
    – Remove the disc by following these steps:
    Press the  button again for at least 2 seconds.
    If the disc still does not eject, consult your Alpine dealer.

    38-EN

    • A copy-protected WMA file was played back.
    – You can only play back non-copy-protected files.



  • Page 39

    (Blank)

    NO SUPPORT
    • Text information that is not recognizable by the unit is being used.
    – Change the text information to text that is supported by the unit.

    • The vTuner application installed for the first time.
    • The resuming playback station is deleted from iPhone.
    – Select another station.

    Indication for iPod Mode

    SEE DEVICE
    • There are no songs in the iPod/iPhone.
    – Download songs to the iPod/iPhone.

    • Database error or decoder error.
    – Replace the iPod/iPhone.

    • Communication error or boot error, etc.
    – You can solve the problem by reconnecting the iPod/iPhone or
    using a different iPod/iPhone.

    • The music cannot be played because the vTuner Compatible
    Application for iPhone requires the user’s attention. Or no vTuner
    application is installed in iPhone.
    – When you are not driving, please see the vTuner Compatible
    Application for iPhone.

    NO SERVICE
    • The device cannot be connected to vTuner internet radio. Or the
    connected iPhone does not support vTuner.
    – Change another iPhone that supports vTuner.
    – Select a source other than vTuner by pressing SOURCE.

    BUFFERING
    • The iPhone is buffering broadcast programmes while receiving or
    after receiving the station.
    – Wait until the buffering finishes.

    • The iPod/iPhone is not verified.
    – You can solve the problem by reconnecting the iPod/iPhone.

    • Abnormal current is run to the USB connector device.
    – You can solve the problem by switching the source.

    LOADING
    • The loading is in process to display the receivable station list.
    • The station list is being transferred.
    – No necessary operation.

    BLUETOOTH mode

    UPDATING
    • The search mode is activated during song downloading.
    – No necessary operation.

    • The BLUETOOTH device is not connected.
    – Connect the BLUETOOTH device.

    Indication for vTuner Mode

    NO STATION
    • The application cannot stream the audio data or the station has been
    deleted, etc.
    – Change another station.

    • There is something wrong with vTuner’s server.
    – Wait until the connection recovery or change to other source by
    pressing SOURCE/.

    NO SUPPORT
    • The selected station’s audio file format cannot be supported by
    vTuner application.
    – Select another station.

    39-EN



  • Page 40

    GENERAL
    Power Requirement

    Specifications
    FM TUNER SECTION
    Tuning Range
    Mono Usable Sensitivity
    Alternate Channel Selectivity
    Signal-to-Noise Ratio
    Stereo Separation
    Capture Ratio

    87.5~108.0 MHz
    0.7 μV
    80 dB
    65 dB
    35 dB
    2.0 dB

    MW TUNER SECTION
    Tuning Range
    Sensitivity (IEC Standard)

    531~1,602 kHz
    25.1 μV/28 dB

    LW TUNER SECTION
    Tuning Range
    Sensitivity (IEC Standard)

    153~281 kHz
    31.6 μV/30 dB

    CD PLAYER SECTION
    Frequency Response
    Wow & Flutter (% WRMS)
    Total Harmonic Distortion
    Dynamic Range
    Signal-to-Noise Ratio
    Channel Separation

    5~20,000 Hz (±1 dB)
    Below measurable limits
    0.008% (at 1 kHz)
    95 dB (at 1 kHz)
    105 dB
    85 dB (at 1 kHz)

    USB SECTION
    USB requirements
    Max. Power Consumption
    USB Class
    File System
    MP3 Decoding
    WMA Decoding
    AAC Decoding
    Number of Channels
    Frequency Response*
    Total Harmonic Distortion
    Dynamic Range
    Signal-to-Noise Ratio
    Channel Separation

    USB 1.1/2.0
    500 mA
    Mass Storage
    FAT 12/16/32
    MPEG AUDIO Layer-3
    Windows Media™ Audio
    AAC-LC format “.m4a” file
    2-Channel (Stereo)
    5~20,000 Hz (±1 dB)
    0.008% (at 1 kHz)
    95 dB (at 1 kHz)
    105 dB
    85 dB (at 1 kHz)

    * Frequency response may differ depending on the encoder software/bit
    rate.

    PICKUP
    Wave length
    Laser power
    BLUETOOTH SECTION
    BLUETOOTH Specification
    Output Power
    Profile

    40-EN

    795 nm
    CLASS I

    BLUETOOTH V 3.0
    +4 dBm Max. (Power class 2)
    HFP (Hands-Free Profile)
    HSP (Head Set Profile)
    A2DP (Advanced Audio
    Distribution Profile)
    AVRCP (Audio/Video Remote
    Control Profile)

    Maximum Power Output
    Maximum Pre-Output Voltage
    Bass
    Mid
    Treble
    Loudness
    Weight

    14.4 V DC
    (11~16 V allowable)
    50 W × 4
    4 V/10 k ohms
    ±14 dB at 60 Hz
    ±14 dB at 1 kHz
    ±14 dB at 10 kHz
    10 dB at 100 Hz
    1.6 kg (3 lbs. 8 oz)

    CHASSIS SIZE
    Width
    Height
    Depth

    178 mm (7")
    50 mm (2")
    163 mm (6~3/8")

    NOSEPIECE SIZE
    Width
    Height
    Depth

    170 mm (6~3/4")
    46 mm (1~13/16")
    25 mm (1")

    Note
    • Due to continuous product improvement, specifications and design are
    subject to change without notice.

    CAUTION

    CLASS 1
    LASER PRODUCT
    (Bottom side of player)



  • Page 41

    Installation and Connections
    Before installing or connecting the unit, please read the following
    and refer to “Operating Instructions” on page 6 for proper use.

    CAUTION

    WARNING

    HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

    MAKE THE CORRECT CONNECTIONS.

    The wiring and installation of this unit requires special technical
    skill and experience. To ensure safety, always contact the dealer
    where you purchased this product to have the work done.

    Failure to make the proper connections may result in fire or
    product damage.

    USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

    (Check with your dealer if you are not sure.) Failure to do so may
    result in fire, etc.

    Be sure to use only the specified accessory parts. Use of other than
    designated parts may damage this unit internally or may not
    securely install the unit in place. This may cause parts to become
    loose resulting in hazards or product failure.

    BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY
    TERMINAL.

    ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP
    METAL EDGE.

    Failure to do so may result in electric shock or injury due to
    electrical shorts.

    Route the cables and wiring away from moving parts (like the seat
    rails) or sharp or pointed edges. This will prevent crimping and
    damage to the wiring. If wiring passes through a hole in metal, use a
    rubber grommet to prevent the wire’s insulation from being cut by
    the metal edge of the hole.

    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

    DO NOT SPLICE INTO ELECTRICAL CABLES.
    Never cut away cable insulation to supply power to other
    equipment. Doing so will exceed the current carrying capacity of
    the wire and result in fire or electric shock.

    DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
    When drilling holes in the chassis for installation, take precautions
    so as not to contact, damage or obstruct pipes, fuel lines, tanks or
    electrical wiring. Failure to take such precautions may result in fire.

    DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO
    MAKE GROUND CONNECTIONS.
    Bolts or nuts used for the brake or steering systems (or any other
    safety-related system), or tanks should NEVER be used for
    installations or ground connections. Using such parts could disable
    control of the vehicle and cause fire etc.

    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
    CHILDREN.
    Swallowing them may result in serious injury. If swallowed, consult
    a physician immediately.

    DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE
    OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.
    Doing so may obstruct forward vision or hamper movement etc.
    and results in serious accident.

    DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
    Avoid installing the unit in locations with high incidence of
    moisture or dust. Moisture or dust that penetrates into this unit may
    result in product failure.

    PRECAUTIONS
    • Be sure to disconnect the cable from the (−) battery post before
    installing your CDE-135BT. This will reduce any chance of damage to
    the unit in case of a short-circuit.
    • Be sure to connect the colour coded leads according to the diagram.
    Incorrect connections may cause the unit to malfunction or damage
    to the vehicle’s electrical system.
    • When making connections to the vehicle’s electrical system, be aware
    of the factory installed components (e.g. on-board computer). Do not
    tap into these leads to provide power for this unit. When connecting
    the CDE-135BT to the fuse box, make sure the fuse for the intended
    circuit of the CDE-135BT has the appropriate amperage. Failure to do
    so may result in damage to the unit and/or the vehicle. When in
    doubt, consult your Alpine dealer.
    • The CDE-135BT uses female RCA-type jacks for connection to other
    units (e.g. amplifier) having RCA connectors. You may need an
    adaptor to connect other units. If so, please contact your authorized
    Alpine dealer for assistance.
    • Be sure to connect the speaker (−) leads to the speaker (−) terminal.
    Never connect left and right channel speaker cables to each other or
    to the vehicle body.
    IMPORTANT
    Please record the serial number of your unit in the space provided
    below and keep it as a permanent record. The serial number or the
    engraved serial number is located on the bottom of the unit.
    SERIAL NUMBER: [
    ]
    INSTALLATION DATE: [
    ]
    INSTALLATION TECHNICIAN: [
    ]
    PLACE OF PURCHASE: [
    ]

    41-EN



  • Page 42

    3

    Installation
    CAUTION
    When you install this unit in your car, do not remove the
    detachable front panel.
    If the detachable front panel is removed during installation, you
    might press too hard and warp the metal plate that holds it in
    place.
    The main unit must be mounted within 35 degrees of the
    horizontal plane, back to front.

    Slide the CDE-135BT into the dashboard. When the unit is
    in place, make sure the locking pins are fully seated in the
    down position. This can be done by pressing firmly in on
    the unit while pushing the locking pin down with a small
    screwdriver. This ensures that the unit is properly locked
    and will not accidentally come out from the dashboard.
    Install the detachable front panel.

    Lock Pin

    Less than 35°

    Removal

    1

    Remove the mounting sleeve from the main unit (Refer to
    “Removal” on page 42). Slide the mounting sleeve into the
    dashboard and fix it with the metal shackles.

    1
    2

    Rubber Cap (Included)

    Bracket

    Hex Bolt
    (Included)
    Mounting Sleeve
    (Included)

    Dashboard

    3

    Remove the detachable front panel.
    Use a small screwdriver (or similar tool) to push the
    locking pins to the “up” position (see above drawing). As
    each pin is unlocked, gently pull out on the unit to make
    sure it does not re-lock before unlocking the second pin.
    Pull the unit out, keeping it unlocked as you do so.

    JAPANESE CAR

    Pressure Plates*
    This unit
    Front Frame

    * If the installed mounting sleeve is loose in the dashboard, the
    pressure plates may be bent slightly to remedy the problem.

    2

    When your vehicle has the Bracket, mount the long hex
    bolt onto the rear panel of the CDE-135BT and put the
    Rubber Cap on the hex bolt. If your vehicle does not have
    the Mounting Support, reinforce the head unit with the
    metal mounting strap (not supplied). Connect all the leads
    of the CDE-135BT according to details described in the
    CONNECTIONS section.

    This unit

    Screw (M5 × 8)
    (Included)

    Metal Mounting Strap
    Mounting Bracket
    Screw

    iPod/iPhone Connection (sold separately)

    *
    Bolt Stud

    1

    Hex Nut (M5)

    Connect USB cable to an iPod/iPhone with Interface cable
    for iPod.

    This unit

    *

    For the screw*, provide a proper screw to the

    chassis installing

    USB Extension cable

    location.

    Interface cable for iPod (included with iPod/iPhone)

    2

    42-EN

    Connect the USB cable to the USB connector of this unit.



  • Page 43

    When connect to Front USB Connection Terminal

    1
    2

    Open the cover of the USB Connection Terminal.
    Connect the Interface cable for iPod directly to the USB
    Connection Terminal, or via the USB cable.
    This unit

    USB Connection Terminal

    Rear USB Memory Connection
    (sold separately)
    Connect USB Memory
    Connect the USB cable to the Rear USB connector of the unit, and then
    secure the connection using the lock case supplied with USB cable as
    shown below.
    This unit

    USB Memory
    (sold separately)

    lock case

    Cable (supplied)
    USB Connector

    Remove USB Memory
    Pull out USB Memory squarely from the USB cable.
    Interface cable for iPod
    (included with iPod/iPhone)

    This unit

    USB Connector

    USB Memory
    (sold separately)

    When connect to Rear USB Connector
    Connect the USB cable to the Rear USB connector of the unit, and then
    secure the connection using the lock case supplied with USB cable as
    shown below.

    Interface cable for iPod
    (included with iPod/iPhone)
    This unit

    Rear USB Connector

    lock case

    Cable (supplied)

    Notes
    • When removing USB Memory, pull it out straight.
    • If sound is not output or USB Memory is not recognized even when
    USB Memory is connected, remove USB Memory once, then connect it
    again.
    • Change to a source other than the USB Memory mode, then remove the
    USB Memory. If the USB Memory is removed in the USB Memory
    mode, data may be damaged.
    • Route the USB cable away from another cables.

    Cable (supplied)

    Mounting the Microphone

    Notes
    • This unit can charge the iPod/iPhone of the current source, and it may
    stop charging when another source is switched.
    • After changing the unit to a source other than the USB iPod, remove the
    iPod/iPhone. If the iPod/iPhone is removed in the USB iPod mode, data
    may cause damage.
    • If sound is not output or the iPod/iPhone is not recognised even when
    the iPod/iPhone is connected, remove the iPod/iPhone once, then
    connect it again, or reset the iPod.

    For the sake of safety, mount the microphone in the following location.
    • In a stable and secure location.
    • In a location that does not inhibit safely driving the vehicle.
    • Mount the microphone in a location where the driver’s voice can
    easily be picked up.
    Choose a location for the microphone that can easily pick up the drivers
    voice. Requiring the driver to move towards the microphone for
    audibility causes a distraction that could be dangerous.

    43-EN



  • Page 44

    Connections

    To USB memory/iPod/iPhone
    Antenna
    (Pink/Black) AUDIO INTERRUPT IN

    Not used
    (Blue/White) REMOTE TURN-ON

    To amplifier
    To power antenna

    (Red) IGNITION

    To the instrument cluster illumination lead
    (Black)
    (Blue)

    GND

    Ignition Key

    POWER ANT

    (Orange) DIMMER

    Battery

    BATTERY
    (Yellow)

    Speakers
    (Green)
    (Green/Black)
    (White)
    (White/Black)

    Rear Left
    Front Left

    (Grey/Black)
    (Grey)

    Front Right

    (Violet/Black)
    (Violet)

    Rear Right

    Microphone

    Speakers
    Front Left

    Amplifier
    Front Right
    Rear Left
    Amplifier
    Rear Right

    Amplifier

    44-EN

    Subwoofers



  • Page 45

     Antenna Receptacle
     Not used
     Remote Turn-On Lead (Blue/White)
    Connect this lead to the remote turn-on lead of your amplifier or
    signal processor.

     Switched Power Lead (Ignition) (Red)
    Connect this lead to an open terminal on the vehicle’s fuse box or
    another unused power source which provides (+) 12V only when the
    ignition is turned on or in the accessory position.

     Ground Lead (Black)
    Connect this lead to a good chassis ground on the vehicle. Make sure
    the connection is made to bare metal and is securely fastened using
    the sheet metal screw provided.

     Power Antenna Lead (Blue)
    Connect this lead to the +B terminal of your power antenna, if
    applicable.

    Note
    • This lead should be used only for controlling the vehicle’s power
    antenna. Do not use this lead to turn on an amplifier or a signal
    processor, etc.

     Rear USB Connector
    Connect this to a USB Memory/iPod/iPhone. To use an iPod/iPhone,
    Interface cable for iPod connection is required.

    Notes
    • Use the supplied USB cable. If a USB cable other than the supplied is
    used, correct performance cannot be guaranteed.
    • Route the USB cable away from other cables.

    To prevent external noise from entering the audio system.
    • Locate the unit and route the leads at least 10 cm away from the
    car harness.
    • Keep the battery power leads as far away from other leads as
    possible.
    • Connect the ground lead securely to a bare metal spot (remove
    any paint, dirt or grease if necessary) of the car chassis.
    • If you add an optional noise suppressor, connect it as far away
    from the unit as possible. Your Alpine dealer carries various
    noise suppressors, contact them for further information.
    • Your Alpine dealer knows best about noise prevention
    measures so consult your dealer for further information.

     Dimmer Lead (Orange)
    This lead may be connected to the vehicle’s instrument cluster
    illumination lead. This will enable the vehicle’s dimmer control to dim
    the backlighting of the unit.

     Battery Lead (Yellow)
    Connect this lead to the positive (+) post of the vehicle’s battery.

     ISO Power Supply Connector
     ISO Connector (Speaker Output)
     Left Rear (+) Speaker Output Lead (Green)
     Left Rear (−) Speaker Output Lead (Green/Black)
     Left Front (+) Speaker Output Lead (White)
     Left Front (−) Speaker Output Lead (White/Black)
     Right Front (−) Speaker Output Lead (Grey/Black)
     Right Front (+) Speaker Output Lead (Grey)
     Right Rear (−) Speaker Output Lead (Violet/Black)
     Right Rear (+) Speaker Output Lead (Violet)
     Fuse Holder (10A)
     MIC Input Connector
    To Microphone.

     Steering Remote Control Interface Connector
    To steering remote control interface box. For details, contact your
    Alpine dealer.

     Microphone (Included)
     Front Output RCA Connectors
    RED is right and WHITE is left.

     Rear Output RCA Connectors
    RED is right and WHITE is left.

     Subwoofer Output RCA Connectors
    RED is right and WHITE is left.

     Power Supply Connector
     RCA Extension Cable (sold separately)
     Front AUX Input Terminal

    About the Rules of Bluetooth Electromagnetic
    Radiation Regulation

    This terminal allows for input of audio from an external device (such
    as a portable player), using a commercially-available converter cable.

     Front USB Terminal
    Connect this to an USB Memory or to an iPod/iPhone.

    Declaration of Conformity

    45-EN



  • Page 46






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alpine CDE-135BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Alpine CDE-135BT in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 3,62 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Alpine CDE-135BT

Alpine CDE-135BT Bedienungsanleitung - Deutsch - 53 seiten

Alpine CDE-135BT Bedienungsanleitung - Holländisch - 53 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info