Bedienungsanleitung Alpine CDE-9870R (Seite 9 von 36) (Englisch)

64364

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

8-EN

01GB05CDE-9870R.fm

ALPINE CDE-9870R 68-05946Z90-A (EN)

Setting RDS Reception Mode and

Receiving RDS Stations

The RDS (Radio Data System) is a radio information system using the

57 kHz subcarrier of regular FM broadcast. The RDS allows you to

receive a variety of information such as traffic information, station

names, and to automatically re-tune to a stronger transmitter that is

broadcasting the same programme.

Press FUNC./SETUP so that the indicator

lights up.

Press 1 /AF to activate the RDS mode.

Press or to tune in the desired RDS

station.

Press 1 /AF again to deactivate the RDS mode.

Press FUNC./SETUP to activate the normal mode.

The indicator goes out.

• Operate the unit while the indicator lights up. If no operation

is performed for 10 seconds, the indicator goes out.

The RDS digital data includes the following:

Recalling Preset RDS Stations

Press FUNC./SETUP so that the indicator

lights up.

Press 1 /AF to activate the RDS mode.

Press FUNC./SETUP to activate the normal mode.

The indicator goes out.

Make sure that the indicator light goes out,

then press the preset button in which your desired

RDS station is preset.

If the preset station’s signal is weak, the unit automatically

searches and tunes to a stronger station in the AF

(Alternative Frequencies) list.

If the preset station and the stations in the AF list

cannot be received:

When the PI SEEK setting is on (refer to “PI SEEK Setting”

on page 9), the unit searches again for a station in the PI

(Programme Identification) list.

If there are still no stations receivable in the area, the unit

displays the frequency of the preset station and the preset

number disappears.

If the signal level of the Regional (Local) station being tuned

becomes too weak to receive, press the same preset button

to tune in a Regional station in other district.

• For presetting the RDS stations, refer to the Radio Operation section.

The RDS stations can be preset in the F1, F2 and F3 bands only.

• Operate the unit while the indicator lights up. If no operation

is performed for 10 seconds, the indicator goes out.

Receiving RDS Regional (Local)

Stations

Press and hold FUNC./SETUP for at least 2

seconds to activate the SETUP mode.

Press or to select the REGIONAL mode, and

then press / /ENT.

Press or to select ON or OFF.

In the OFF mode, the unit automatically keeps receiving the

related local RDS station.

Press and hold FUNC./SETUP for at least 2

seconds to return to normal mode.

• Press AUDIO/RTN to return to the previous mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

RDS

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

EON Enhanced Other Networks

1 /AF

BAND/TA

TITLE

//ENT

AUDIO/RTN FUNC./SETUP

01GB00CDE-9870R.book Page 8 Wednesday, November 1, 2006 10:47 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-9870R Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-9870R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info