Bedienungsanleitung Angelcare AC401de luxe (Seite 4 von 16) (Englisch)

537057

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

1. The SensorPad works with most

baby bed sizes and mattresses,

except memory foam mattresses and

hollow framed mattresses.

2. Position the SensorPad in the middle of

the bed on top of the cot base as shown

on the left, with the printed side of the

SensorPad facing upwards.

3. Safely pass the SensorPad cord

through the slatted base/springs of the

cot keeping the cord well away from

baby.

NOTE: If your cot has a solid hardwood

base; drill a hole in the hardwood base

and pass the SensorPad cord safely

through the hole, keeping the cord well

away from baby.

Place the mattress back ON TOP of the

SensorPad.

4. Safely secure the SensorPad cord by

wrapping it around one of the cot legs

and attach it securely using a plastic

cable tie.

5. Plug the SensorPad cord into the Nursery

Unit, with the SensorPad cord

running safely out of reach of children.

6. The Sensitivity adjustment has been

preset. DO NOT ADJUST UNLESS

NECESSARY.

The sensitivity of the SensorPad can be

adjusted to ensure optimal performance

in any situation (e.g. mattress size and

thickness). See Step 5: Testing your

Angelcare Monitor.

NEVER use the Angelcare Movement &

Sound Monitor if multiple babies are sleeping

together in ONE bed. For monitoring more

than one baby (e.g. twins) you need two

Angelcare AC401 Movement & Sound

Monitors and the babies need to be in

SEPARATE beds.

IMPORTANT

• Keep the cord on the oor, well out of

reach of children.

• The Sensor Pad is not designed for use

with adults, children or infants older than

24 months.

• Once you have nished using the Sensor

Pad, please remove it from the baby’s crib

and store it away.

The SensorPad CANNOT be used with

mattresses for adults or any mattress with

memory foam.

DO NOT attach to/put in the cot any items

or objects that move or vibrate (e.g.

mobile/battery powered items) as this will

affect the SensorPad readings.

DO NOT attach any objects that move or

vibrate to the cot, for example mobile/

battery powered items.

Crib Centre

PART 2 - SETTING UP YOUR MONITOR

Step 1: Installation of the SensorPad

1. PAIRING button and Parent Unit PAGING

function

2. Power ON/OFF

3. Night light ON/OFF

4. PENDULUM light (ﬂashes when

movement is being detected)

5. POWER ON light

6. LOW BATTERY indicator

7. Microphone

8. Speaker

Step 2a: Functions Nursery Unit

1m 3ft

IMPORTANT - STRANGULATION HAZARD

Children have STRANGLED in cords. Keep the

Adapter cords and Sensor Pad cord WELL out

of the reach of children.

DO NOT put the Nursery Unit inside a crib

(cot) or play yard (play pen).

Because of the serious strangulation risk to

infants and toddlers, parents and caregivers

should NEVER place the Nursery Unit within 1

meter (3 feet) of a crib. NEVER use extension

cords with AC Adapters. ONLY use the AC

Adaptors provided.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Angelcare AC401de luxe Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Angelcare AC401de luxe

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info