Bedienungsanleitung Argo Bear (Seite 4 von 6) (Englisch)

665656

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

V 12/15

AIR SWING BUTTON: Press the AIR SWING button to increase the ventilation area in the room. The vertical fins will

swing towards the right and left. To stop them from swinging, press AIR SWING again and the indicator light will switch

off. The horizontal fins can be moved downwards or upwards.

TIMER BUTTON: Press the TIMER button to select the desired time interval. The selected time range is between 0.5 and

7.5 hours. The indicator light corresponding to the time will light up.

MODE BUTTON: When this button is pressed once, the basic setting is NORMAL; press the button again to select the

desired ventilation mode according to the following sequence:

NORMAL → NATURE → SLEEPING

COOL BUTTON: The COOL indicator light flashes if the water in the tank falls below the minimum level marked

on the tank, or if there is no water at all.

Before operating the unit in COOL mode, make sure that the water tank valves are properly secured. Next, pour

demineralised water into the tank between the minimum and maximum levels marked.

Press the COOL button: the unit will begin to emit cooler air. The COOL button will light up.

For improved cooling performance, add synthetic ice (not supplied) directly to the water in the tank, after leaving it in the

freezer for a few hours.

To deactivate the COOL function, press the corresponding button again.

PURIFIER BUTTON: activates the air purification function.

To turn the cooler off, press the ON/OFF button. Remove the plug from the socket.

NOTE: the unit will stop functioning with a 5-minute delay to allow the mesh filter to dry.

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES

Open the battery compartment on the rear of the remote control by sliding the cover out backwards. Insert 2 x AAA

batteries (not supplied) while making sure to match the poles

(refer to the picture below relative to the remote control assembly).

INFORMATION FOR THE CORRECT DISPOSAL OF BATTERIES IN ACCORDANCE WITH EUROPEAN DIRECTIVE

2006/66/EC

Replace batteries when they are depleted. At the end of their life, batteries must be disposed of separately from unsorted

waste. It must be must be delivered to appropriate separated waste disposal plants or to dealers that provide a similar

service. Separate waste disposal of batteries prevents potential negative effects on the environment and human health

resulting from inadequate disposal, and also allows the materials from which it is made to be recovered and recycled in

order to achieve significant savings in terms of energy and resources. The separate disposal obligation is underlined by

the crossed-out dustbin symbol appearing on the battery. Illegal disposal of the product by the user is subject to

administrative penalties as per current regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Bear Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Bear

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info