707157
85
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
8.16.4. Pads section
Pads Velocity Curve: Determines the velocity curve that is used by the pads.
Three settings are available: Linear (Lin), Logarithmic (Log), or Exponential (Exp).
Pads Aftertouch Curve: Determines the aftertouch curve that is used by the pads.
Three settings are available: Linear (Lin), Logarithmic (Log), or Exponential (Exp).
Pads Aftertouch Min: Sets the minimum aftertouch value that will be generated
by the pads.
Pads Aftertouch Max: Sets the maximum aftertouch value that will be generated
by the pads.
8.16.5. Keys section
Keys Aftertouch Curve: These parameters let you alter the aftertouch response of
KeyLab mkII’s keyboard. Three settings are available: Linear (Lin), Logarithmic
(Log), or Exponential (Exp).
Keys Aftertouch Min: Sets the minimum aftertouch value that will be generated
by the keyboard.
Keys Aftertouch Max: Sets the maximum aftertouch value that will be generated
by the keyboard.
8.16.6. MIDI Thru section
These two settings determine whether data will be passed between the MIDI and USB
connectors in both directions, only one direction, or not at all.
MIDI IN to USB: A setting of On allows data received at the physical MIDI In
connector to be passed over USB to your DAW or another USB device. A setting
of Off prevents this.
USB to MIDI Out: A setting of On allows data received via USB to be send to
external devices via the physical MIDI Out connector. A setting of Off prevents
this.
8.16.7. Continuous Pedal Calibration
: Each of the 5 pedal inputs has the same parameters in this section, so we'll cover them all at the
same time.
When the Mode of a Pedal is set to Control (as opposed to Switched Control), it is possible
to adjust the input to work with a wide range of variable pedals.
Pedal Min: sets the value to match the lower end of the resistor range
Pedal Max: sets the value to match the upper end of the resistor range
8.17. Import and Export buttons
You can also Import and Export all of the Device Settings, which allows you to configure any
KeyLab mkII with your preferred settings at once. An exported Device Settings file carries
the extension .keylabmkII_ds.
Arturia - User Manual KeyLab MkII - MIDI Control Center 80
85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arturia Keylab MKII 61 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Arturia Keylab MKII 61

Arturia Keylab MKII 61 Bedienungsanleitung - Deutsch - 98 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info