Bedienungsanleitung Atika FM 2 Vochtigheidsmeter (Seite 4 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch)

519942

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

You may not start this device unless you have

read these instructions and followed all notes

therein.

Keep the instructions in a safe place for future use.

Extent of delivery

 After unpacking, check the contents for

! That it is complete

! Check for possible transport damage

Report any damage or missing items to your dealer or the

manufacturer immediately. Complaints made at a later date will

not be acknowledged.

− Moisture measuring device

− Operating instructions

Normal intended use

• This moisture measuring device is only designed for measur-

ing the moisture content of wood and building materials as

well as for measuring the ambient temperature.

• The moisture content is measured sticking probes into the

material to be measured or to hold them on such materials.

• A sensor determines the temperature.

• Designated use also includes the adherence to the safety

notes and instructions contained in these operating instruc-

tions.

• Any other use is deemed not to be intended use. The

manufacturer is not liable for any type of damage resulting

from this: the user bears the sole risk.

• Arbitrary modifications on the device exclude a liability of the

manufacturer for damages of all kinds resulting from it.

Risidual risks

Even if used properly, residual risks can exist even if the

relevant safety regulations are complied with due to the design

determined by the intended purpose.

Residual risks can be minimised if the “Safety instructions” and

the “Normal intended use” as well as the whole of the operating

instructions are observed.

Observing these instructions, and taking proper care, will

reduce the risk of personal injury or damage to the equipment.

In addition, in spite of all the precautionary measures taken,

non-obvious residual risks can still exist.

Safety instructions

 Make yourself familiar with the equipment before using it, by

reading and understanding the operating instructions.

 Do not use the device for other than designated purposes

(see "Normal intended use" and "Working with the moisture

measuring instrument").

 Do not modify the device or parts of the device respectively.

 Only open the instrument for inserting/replacing the battery.

 Take environmental influences into consideration:

− Do not use the instrument in a humid or wet environment.

− Do not use the instrument in potentially explosive atmos-

pheres where inflammable liquids, gases or dusts are

present.

− Do not leave the instrument in the rain or use when rain-

ing.

− Do not expose the instrument to heavy vibrations.

− Do not expose the instrument extreme temperatures.

 Do not allow children to play with this instrument.

 Keep unused instruments in a dry, locked place out of the

reach of children and animals.

 To exclude the risk of injury always install the protective cap

when the instrument is not used.

Description of the device

 Protective cap

(spare parts-no. 362991)

Probe

! LC display

" LED

# ON and mode switch

$ Battery compartment cover

(spare part-no. 362992)

LC display

Battery low

° Battery change required

Instrument in “Building moisture mode”

° Construction materials such as mortar, concrete,

bricks, etc.

Instrument in “Wood moisture mode”

° Material from wood such as sawn timber, paper,

cardboard

Moisture content in %

°C Temperature in degrees Celsius

°F Temperature in degrees Fahrenheit

Battery

A 9V block battery (6LR61 / 6AM6) is required for the

instrument.

Inserting/changing:

1. Remove the battery compartment cover.

2. Insert the battery with the correct polarity.

3. Reattach the battery compartment cover.

Batteries may leak.

To prevent the instrument from getting damaged by a

leaking battery

° remove the battery from the instrument when the in-

strument is not used for a longer period of time

° remove used up batteries without delay.

Risk of explosion.

Do not short-circuit, charge, open batteries and do not

throw them in fire.

Keep unused batteries in a dry, locked place out of the

reach of children and animals.

Working with the moisture measuring device:

Powering up

Press the key # for a short time.

Selecting the measuring mode

1. Keep the key # pressed for 3 seconds. The indicated

symbol will flash.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika FM 2 Vochtigheidsmeter Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info