• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Connection and Operation
• The product‘s design complies with protection class I. Only an earthed mains
socket connected to the public power supply may be used as power supply to
the product.
• The mains socket into which the daily timer switch is inserted must be easily
accessible.
• The product is equipped with a protection against accidental contact. -
grated mechanism will release the holes of the receptacle only
of a power plug are inserted into the two holes at once.
• T
danger arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
• The product is only intended for use in dry indoor locations. No part of the product
should become damp or wet; never handle it if your hands are wet! Never place
the product in direct vicinity of a bathroom, shower
hazard due to electric shock!
• Use the product only in a temperate climate, never in a tropical climate.
• Do not operate the device in environments where there are high levels of dust,
ammable gases, vapours or solvents. There is a risk of re and explosion!
• Never use the daily timer switch in a vehicle.
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The con-
densation that forms might destroy the device. Moreover-
tric shock! -
tion has evaporated. This might take several hours. Only after this should the
product be plugged into the power supply and put into use.
• Never pull out the power plug from the front socket of the daily timer switch by
pulling on its cable.
area provided for this purpose on its sides.
• Do not overload the daily timer switch. Observe the connected load in the chapter
“T
• Always pull the switch timer out of the mains socket before cleaning it or when the
device will not be in use for a long time.
• Never pour any liquids above or next to the product. Y
a re or a fatal electric shock.
If any liquid has still managed to enter the device, immediately turn off the power
supply to the mains socket at which the daily timer switch is connected (turn off
the fuse/circuit breaker/residual current operated circuit breaker of the associ-
ated circuits). Only then can you unplug the daytime timer switch from the mains
socket and contact a specialist. Do not use the product any longer
• Do not connect in series! This can lead to an overloading of the switch timer!
There is a risk of re!
• Do not operate while covered! -
comes warm, which can lead to overheating and potentially a re if covered!
• Only voltage-free, when the plug is unplugged!
• Never touch a daily timer switch that shows signs of damage, as this could cause
a fatal electric shock!
First, switch off the mains voltage to the socket to which the daily timer switch is
connected (switch off at the corresponding circuit breaker or remove the safety
fuse or switch off at the corresponding RCD protective switch, so that the socket
is fully disconnected).
Only then can you remove the daily timer switch from the mains socket. Do not
use the damaged daily timer switch any longer and dispose of it in an environ-
mentally-friendly manner
Operating instructions
Mini daily timer switch, mechanical
Item no. 1528589
Intended use
The product has a socket which can be switched on and off with the integrated mechanical time
switch. Thereby
The product is only intended for use in dry indoor locations.
The product must be connected to a mains socket with earth contact. See chapter “T
Data“ for information on connection and the maximum permissible power consumption of the
connected electrical loads.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Moreo-
ver
the operating instructions carefully and do not discard them. If you pass the product on to a third
party
This product complies with the applicable national and European regulations.
companies and products are the trademarks of the respective owners.
Package Contents
• Mini daily timer switch
• Operating instructions
• Sticker set (type labels)
Up-to-date operating instructions
Download the latest operating instructions via the link www or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury
An exclamation mark in a triangle indicates important instructions in this operating
manual which must be adhered to.
The arrow
provided.
Observe the operating instructions!
Safety Instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material damag-
es resulting from failure to observe the safety instructions and the information
in these operating instructions regarding the proper handling of the product.
Furthermore, in such cases, the warranty/guarantee will be null and void.
a) General
• The product is not a toy
• Do not leave packing materials unattended. It may become a dangerous play -
thing for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
has visible damage,
no longer functions properly
has been stored under adverse ambient conditions for an extended period
of time or
has been exposed to considerable strain during transport.
• Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualied technician.
• Maintenance, adjustment and repair work may be carried out only by an expert
or a specialised workshop.
