Bedienungsanleitung Basetech 1528589 (Seite 4 von 6) (Deutsch, Englisch, Holländisch)

738537

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Preparation

Type labels in different languages are included in the package. Stick the language label in your

language over the German language label on the back of the daily timer switch.

Choose between permanent operation and switch operation

There is a slide switch on the side of the daily timer switch to select the desired type of opera-

tion:

Position “ ” The socket is permanently switched on; settings on the timer are irrelevant

Position “ ” The socket is automatically switched on or off by the daily timer switch

depending on the existing settings

Setting the time

Turn the outer setting ring with the imprinted times clockwise (observe the big arrow on the

inner ring), until the symbol “ ” on the inner ring displays the current time.

Turn the setting ring only clockwise, it can be moved easily.

It is not possible to turn it anti-clockwise! Do not exert any force! If the daily timer

switch is damaged due to that, the warranty will be void!

The daily timer switch only works when it is supplied with electricity, i.e. when it is connected

to an active mains socket.

Setting the on/off times

With the segments on the edge of the setting ring (48 shift segments for 24 hours), you can set

the times for switching on or off.

A segment when pressed down activates the socket (voltage on), a segment when pushed

upwards or pulled out switches the socket off (no voltage, the connected device is off).

Example: If you wish a connected appliance to be switched on every weekday between 6 and

10 o‘clock, press the segments between 6 and 10 downwards. All the other segments must

be pulled out.

Due to the design of the daily timer switch (mechanical operation and switch pro-

cess; 48 shift segments for 24 hours), deviations from the switching times will occur.

For the switch processes or switching times that require accuracy, electronic daily

timer switchs should be used instead.

However, the mechanical daily timer switch has the great advantage that a setting

can be made very quickly.

Connecting a device to the daily timer switch

• Switch the device off.

• Plug the device to the socket of the daily timer switch; push the plug completely into the

socket of the daily timer switch.

• Switch the device on.

• If the slide switch for the type of operation is in the position “ ”, the socket of the daily timer

switch is permanently switched on.

If the slide switch for the type of operation is in the position “ ”, the socket of the daily timer

switch will be automatically switched on or off depending on the segments on the setting ring.

Care and Cleaning

Before cleaning the product, disconnect the appliance from the daily timer switch. Disconnect

then the daily timer switch from the power supply by pulling it out of the mains socket.

Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these

could damage the housing or even impair operation.

Use a dry, lint-free cloth to clean the product.

Disposal

Electronic devices are recyclable material and do not belong in the household

waste. Dispose of an unserviceable product in accordance with the relevant statu-

tory regulations.

Technical Data

Operating voltage ......................... 230 V/AC, 50 Hz

Connection power ......................... Resistive load: max. 3680 W (230 V/AC, 16 A)

Inductive load: max. 460 W (230 V/AC, 2 A)

Devices with mainly resistive load are, e.g., light bulbs, heaters, etc.

Powered devices with inductive load are, e.g., engines, control gears, conventional

transformers, energy-saving bulbs, etc.

Protection type .............................. IP20

Switch type ................................... Micro-switch (single-pole)

Smallest switchable time unit ....... 30 min (48 switch segments for 24 hours)

Enhanced protection against

accidental contact ......................... yes

Ambient conditions ....................... Temperature 0 °C to +40 °C, air humidity 20% to 85%

relative, non-condensing

Dimensions ................................... 103 x 54 x 70 mm (L x W x H, including plug)

Weight .......................................... 110 g

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Basetech 1528589 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info