INSTALLATION AND SERVICE INSTRUCTIONS FOR HOT AIR FIREPLACE INSERTS
Important:
Inform your local chimneys sweep!
Read the complete installation and service instructions!
Keep to the regulations and orders of these instructions during installation and service of this fireplace insert!
Keep to the appropriate standards during fireplace insert installation and service!
Keep these instructions in a safe place!
These instructions contain the Equipment Certificate!
We recommend ordering a professional firm to install the insert.
Hot air fireplace inserts in accordance with EN 13 229 – W
Congratulations!
You have chosen a product of high quality, the hot air fireplace insert. Read carefully these service instructions. You will get the information
about function and operation of your fireplace insert; you will increase its value and its service life.
Also you can save fuel and protect the environment. An Equipment Certificate is included (you can download it also on
www.befhome.com).We ask you please to read this manual as well as the instructions for your specific model before beginning the
installation.
We can provide a guaranty for our products only when the installation and service instructions are kept.
Essential requirements
- It is necessary to ensure that the whole unit with connecting piece and chimney will be safe during operation. The whole unit must be
safe and easy to clean.
- THE DATA OF SAFETY PRECAUTIONS FROM THE POINT OF VIEW OF FIRE PROTECTION IN ACCORDANCE
WITH NATIONAL STANDARDS.
- Be especially careful to maintain a minimum distance from any combustible subjects during the fireplace installation in the
standard, according to
national norm
.
- The minimum safe distance from combustible material with combustibility degree of B, C1 and C2 is min. 200 mm. For a
combustibility degree of C3 and for unsubstantiated combustibility degree in accordance with national technical standards and
regulations it is necessary to double the distance.
- The unit may be used in a normal environment in compliance with national technical standards and regulations. When this
environment changes and there could be a temporary fire or explosion risk (e.g. at work with paint substances, at linoleum mounting,
etc.) the unit must be removed immediately.
Note: The fireplace insert must be situated a safe distance from other room equipment
Information about the combustibility level of some construction materials
The combustibility level of the construction material
A incombustible – granite, sandstone, concrete, special pargeting, bricks, ceramics facing
B hardly combustible - gypsum plasterboard
C1 hard combustible – leafy wood, plywood, hardened paper
C2 medium combustible – cork sheets, indie-rubber, floor material
C3 light combustible – wood-fibre sheets, polystyrene, polyurethane, PVC
Door adjusting and door unhanging for service
The front door is possible to unhang for more comfortable cleaning and service. First throw up safety pin on the top hinge (pict. 8). After, the
door can be uplifted and be unhung from the fireplace insert (pict. 9).
The door adjusting is possible due to adjustable bottom hinge. After dismounting of the frame (pict. 10), loose two screws M6 on the bottom of
the frame (pict. 11) and move hinge into the position requested. For easy access to screws of the hinges it is necessary to keep space between
veneer and bottom part of the frame. This space is important for additional demounting of door contact.
Pict. 8 Pict. 9 Pict. 10 Pict. 11
1 – Hinge
Adjusting of the door pressure:
Due to 2 screws M5 (pos.1), it is possible change the position of the
hung of the door frame. It is possible to change the pressure (increase or decrease) because of the
replacing of the sealing insulating tape.
