Bedienungsanleitung BeF Home Passive - HOT AIR FIREPLACE INSERTS (Seite 7 von 9) (Englisch)

810623

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

________________________________________________________________________________________________________________________________

Firma: BeF Home, s.r.o. Strana 7 (celkem 9) Platí od: 1. 4. 2014

Vydání: 4

 Coating (fireplace surround): The coating of the fireplace insert which leads into the room must be made of non combustible material of

grade A1 (e.g. tiles, plaster coat, iron or ceramic tiles). There must not be any direct contact between the coatings and the fireplace

insert. The coating may overlap only on the separate carrying frame which is clamped to the wall. For adjustment, maintenance of a

safety valve, a pump and accessories or possible repairs it is necessary to provide the surround with service holes. These holes are

necessary for these operations and it is not needful to build the surround.

 Ornamental beams: Ornamental beams are allowed in front of the fireplace coating at a distance of 1 cm at least if the ornamental beam is

not a part of the building and the intermediate space is such that it does not accumulate heat and the ornamental beam is not situated

within the area of the insert heat radiation ( pict.5)

obr. 5

Fire protection above a heat radiation area:

A minimum distance of 80 cm forwards and sideways must be retained in

front of the firebox hole (pict.5, position 1). If the protection against heat

radiation is from both sides, a distance of 40 cm is enough (pic. 5, position

2).

Fire prostection above a heat radiation area:

A minimum distance of 5 cm from the outer space of the insert coating to noncombustible building panels must be retained. Air space must be

clear so as not to accumulate heat (pict. 5, position 3). Building panels covering only small coated areas of the fireplace insert, e.g. floors, wall

coating and thermal insulation layers may abut onto the coating (pict. 5, position 4). Wider combustible building panels, e.g. ornamental beams,

may be at a distance of 1 cm from the insert coating (see Ornamental beams)

External combustion air income:

Hot AIR fireplace inserts are adjusted for direct connection for external combustion air inflow. Bellmouth of diameter of 120 – 150 mm for

external combustion air connection is ending on the back side (or bottom side) of the fireplace insert. Inflow for outdoor air connection for

combustion in a fireplace insert must have as few bends as possible. For air inflow within the distance of 1.5 m with one bend (max. 90°) it is

possible to use a pipe of diameter 100 mm. For air inflow within the distance of 3 m with one or two bends (total disjunction of angles 135°) it is

possible to use a pipe of diameter 125 mm. When there is longer distance and more bends, it is necessary to take into account air resistance

caused by friction of tube walls. It is possible to supply hot air fireplace inserts with automatic electronic regulation of the combustion process.

Automatic regulation consists of control unit, control damper and temperature sensor. Control dumper must be situated in supply pipes, as close

as possible to fireplace insert and connect hermetically onto bellmouth of the air inflow. After building of the fireplace, the dumper must be

accessible for service. When automatic regulation is in use, it is convenient to set up the hand-operated element in the 2/3 open position

(providing right proportion of the air for nominal output of the insert). Also, fireplace insert can be fitted with door contact for easy service

(position of the door contact is described below in paragraph “door adjusting and unhanging). More detailed description of connection and

installing you will find in installing document of Automatic regulation.

Firebox running:

Fireplace inserts are suitable for only closed spaces

Fuel:

Fireplace inserts can be operated only with the following fuel: dry wooden logs

ONLY DRY WOOD LIBERATES LITTLE HARMFUL POLLUTANTS DURING BURNING!!!

A fireplace insert is not suitable for waste burning!!!

Combustion air input:

It is necessary to supply a sufficient amount of external air into the room when using the fire. Both open and closed fireplaces require an

adequate amount of fresh air. The steps for combustion air input cannot be changed and combustion air inputs must be open during the working

operation of the firebox.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeF Home Passive - HOT AIR FIREPLACE INSERTS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info