Bedienungsanleitung BenQ PE 8700 (Seite 1 von 27) (Englisch)

468359

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

BenQ PE8700 Video Projector

BenQ PE8700 User’s Manual

BenQ PE8700 Video Projector

User’s Manual

Thank you for your purchase of this quality BenQ video projector! It has been designed to provide you with a home

theater viewing experience. For the best result, please read this manual carefully as it is your guide through the control

menus and operation.

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Do not use this projector near water, outdoors or otherwise exposed to the elements.

5. Clean only with a dry cloth.

6. Do not block any ventilation openings.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

8. Do not defeat the safety feature of the polarized or grounding type plug. A polarized type plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The third prong is

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the

replacement of the obsolete outlet.

9. The 12V trigger only outputs a DC 12V signal for triggering. Do not connect to any other power input or output.

This could cause damage to this unit.

10. Use only accessories specified by BENQ Corporation.

11. Keep the packing material in case the projector should ever need to be shipped.

12. Unplug this projector during lightning storms or when it will not be used for an extended period of time.

13. The lamp becomes extremely hot during operation. Allow the projector to cool down for approximately 45

minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life.

Excessive operation of lamps beyond rated life could cause them to explode in rare occasions.

14. Refer all servicing to qualified service personnel. Servicing is required when the projector has been damaged in any

way, including but not limited to objects having fallen or liquids having been spilled into the projector, exposure to

rain or condensing moisture, unexplained failure to operate normally, or the unit having been dropped.

This symbol is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute

a risk of electric shock.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ PE 8700 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info