Fig. 3
D
Q
G
P
R
S
T
4 5
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including
the following:
1. Before connecting the heater, check that the
voltage indicated on the rating plate
corresponds to the main voltage in your
home/office.
2. WARNING: In order to avoid
overheating, do not cover the heater ( )
Reference to product.
3. DO NOT position the heater directly under
a power socket.
4. DO NOT use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
5. If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its
service agent or similarly qualified person in
order to avoid hazard. The heater contains
no user serviceable parts. Should the
product suffer damage or breakdown, it must
be returned to the manufacturer or their
service agent.
6. Under the environment with electrical fast
transient, the product may malfunction.
7. DO NOT use this heater with a programmer,
timer or any other device that switches the
heater on automatically, since a fire risk
exists if the heater is covered or positioned
incorrectly.
8. Only touch the heater with dry hands.
9. DO NOT use this heater outdoors.
10.DO NOT position where it can be touched by
children, especially the very young.
11. Allow a safe area around the heater away
from furniture or other objects; at least 50 cm
from the top and sides and 200 cm at the
front. The heater is to be placed at least 3m
from water source.
12.DO NOT use this heater when it is lying on
its side.
13.DO NOT use the heater in rooms with
explosive gas (e.g. petrol) or while using,
oxygen, inflammable glue or solvent (e.g.
when gluing or varnishing parquet floors,
PVC etc.)
14.DO NOT insert any objects into the heater.
15.Keep the mains cord at a safe distance from
the main body of the heater.
16.If overheating should occur, the built-in
overheating safety device will switch off the
heater.
17.DO NOT place the cord under a rug.
18.The heater cannot be used adjacent to
curtains or combustible material. Curtains
or combustible material may be burned if
the heater was installed incorrectly.
19.This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
20.This heater is filled with a precise quantity of
special oil. Repairs requiring opening of the
oil container are only to be made by the
manufacturer or his service agent who
should be contacted if there is an oil leak;
21.When scrapping the heater, follow the
regulations concerning the disposal of oil.
DESCRIPTIONS (See Fig. 1, 2 & 3)
A. Heated Fins
B. Vents
C. Pull down handle
D. Power switch
E. Cord Storage
F. Power cord
G. Front castor assembly
H. Digital display
I. Power light
J. Mode light
K. Timer light
L. Mode button
M. Thermostat/timer button
N.Adjuster buttons
O. °F · °C button
P. Front wing nut
Q. Castor
R. Rear castor assembly
S. Rear wing nut
T. U-bolt
Technical Specifications
BOH2503D, Wattage: 2500W
ASSEMBLY INSTRUCTIONS (See Fig. 3)
Please make sure the heater has not been
plugged into any electricity outlet.
Carefully remove heater from box. Some
accessories are packed internally. Please make
sure you have all of the following accessories
prior to throwing away packaging.
2Castorassemblieswithfourcastors(R,G,&Q),
and 2 U Bolts with wing nuts (T, P, S).
Note: This unit is for FLOOR USE ONLY.
ENGLISH
1.Turntheheaterupsidedownandyouwillsee2
U-bolts(T)withwingnutsoverthefirstandlast
jointof theheater.
2.Unscrew thewingnuts(S& P)fromthe
U-bolts(T).
3.Startwiththefrontoftheunitandplaceone
holeofthefrontcastorassembly(G)totheL
shapeoftheU-bolt(T)andtheotherholeof
thecastorassemblyintotheotherendof the
U-bolt,thenscrew onthewingnut(P).
4.Repeatstep3fortherearcastorassembly,
usingwingnut(S)instead ofwingnut(P)and
rearcastorassemblies(R).
5.Use your hand to press the four castors (Q)
onto the four axes of the two foot plates until
you hear them click into place. Use your hand
to turn the castors and if they move smoothly
they have been installed properly.
6.Afterinstallationofthefrontandrearcastor
assembliesandthecastors turntheheaterthe
rightwayup:theheaterisnowreadyforuse.
NOTE: Makesurewhenassemblingthatthe
castorassemblieswithwheelsarepointing
outwards formaximumstability.
OPERATING INSTRUCTIONS
(See Fig. 1 & 2)
1. Ensure the power switch (D) is set to the OFF
(O) position.
2. Plug in heater.
3. Flip the power switch to the ON (-) position.
The power light (I) will illuminate red until the
unit is unplugged.
4. Press the mode button (L) once to activate
the unit. The mode light (J) will glow green to
indicate the heater is running. The unit will
automatically start on Setting 3 (High Heat).
5. Press the mode button until the desired heat
setting is shown on the digital display (H).
BOH2503D: 3=2500W, 2=1300W,1=1200W,
=Energy Saving Mode
After using the heater, press the mode button
until the unit is deactivated and the mode light
turns off, then turn the power switch to the OFF
position. Unplug the the heater from the socket.
SETTING THE THERMOSTAT
1.Setthedesiredheatsettingbypressingthe
modebutton.
2.Pressthethermostat/timerbutton(M)onceto
activate thermostatsetting.Theroom
temperatureandathermostaticonflashonthe
display.
3.Pressthe+ or-adjusterbuttons(N)toselect
thedesiredtemperature.(Range12°C-30°C)
4. The thermostat symbol will stop flashing. The
thermostat control will now automatically
maintain the preset temperature level by
turning the heater on and off.
5. Todeactivatethethermostatsetting, pressthe
thermostat/timer buttoncontinuouslyuntilthe
thermostatsymboldoesnotappearonthe
display.
NOTE: The Power light will remain lit during
operation.
NOTE: It is normal for the heater to cycle ON
and OFF as it maintains the preset
temperature.
FROST GUARD INSTRUCTION
Whentheheateris infrostguardmode,the
temperaturewillbemaintainedat5°C;thusthe
heaterwillbeintheoffstatusunless theroom
temperatureislowerthan5° C.Iftheroom
temperatureislowerthan5° C,theheaterwill
automaticallystartworkingandwillkeepturning
on&offallthetime,maintainingitsambient
temperatureof5°C.To activate,pressthemode
buttontoturntheuniton,thenpressthe
thermostat/timer buttontwice.The( )iconwill
displaytoindicatethatfrostguardisactivated.
USING THE TIMER
Programmable timer
The user can programme the heater to turn
OFF after a selected period or to come ON
at a preset time.
Setting the OFF timer
1. Select the mode and temperature you want
the heater to run.
2. Press the thermostat/timer button 3 times.
The OFF timer icon flashes.
3. Using either the (+) or (-) adjuster buttons,
programme the heater to turn off up to 24
hours later, in increments of 1 hour.
4. After setting the time, the digital display will
stop flashing to show the timer is activated.
The timer will count down until the
predetermined length of time has passed, and
the heater will then automatically switch off.
Setting the ON timer
1.Iftheheaterison,pressthethermostat/timer
controlbutton4times.TheONtimericonflashes.
2. Using either the (+) or (-) adjuster buttons,
Example - Switch OFF - The time is 1 pm.
The heater is running and you require the
heater to switch off at 10 pm; therefore, set
the time to 9 hours.
Example - 9 hours
K
L
M
N
O
