Bedienungsanleitung Black Decker GA100 T2 (Seite 2 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

586385

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Shredder

GA100 Instruction Manual

Recycling garden and organic household

waste into useful compost makes good sense.

The Black & Decker compost shredder quickly

reduces such waste to a fraction of its original bulk

and to a size which will compost far quicker than

unshredded material.

For your safety and for best results, read the

whole of this leaflet carefully before using your

Garden Shredder! (H1)

Assembly (Fig. A)

Unpack and check the loose parts.

You should have:

1 funnel

1 shredder

3 support legs

1 2-core “female” Safe ‘n’ Tidy connector

(UK only)

1 bag containing:

1 spanner

1 hexagonal key

3 bolts, nuts and washers

1 bag containing:

2 screws

2 washers

• Fit the funnel into the top of the shredder

in such a way that the slot width is at

right angles to the direction of the

discharge spout. Secure with the

2 screws and washers provided.

• Note: The spanner and hex key should

be stored under the cover plate.

Assembling the legs (Fig. B)

To assemble the legs, you will need to use

the spanner provided. Turn the shredder so

that it is resting on the large funnel.

Taking the screws, nuts and washers

provided, secure the support legs in the

base of the unit, ensuring that the legs are

pointing outwards.

Materials suitable for shredding

The garden shredder will shred most forms of

organic waste to be found in the home and garden.

For instance, prunings, hedge trimmings, twigs,

organic garden waste, kitchen waste, paper and

cardboard can all be reduced to shreds quickly

and easily.

Do not feed the shredder with stones, glass, metal

objects, bones, plastics or rags (H5).

Do not shred roots covered in soil as the blades

become blunt very quickly.

Use the main feeder funnel for small branches and

twigs (up to

⁄4"/6mm diameter) and thicker branches

(up to 1"/25mm diameter) should be inserted in the

side feeder.

Please refer to the section in this manual entitled

“Getting the best out of your shredder” for

further information.

Safety instructions

Electrical safety

• Your machine is designed for use on AC (mains)

electrical supplies only. Do not attempt to use on

any other supply.

• Plug your machine into a power point, never in a

light socket.

• Do not leave your machine unattended whilst it

is connected to the electrical supply. Switch off

and remove the plug whenever you leave

your machine.

• Always switch off and remove the plug from the

mains before cleaning, inspecting or adjusting

any part of the machine, before clearing a

blockage, if the supply cable has become

damaged or entangled, or before lifting, carrying

or storing (H8).

• Switch off and remove the plug from the

socket to inspect your machine for damage

and to rectify any faults after a hard object

enters the machine or if the machine starts to

vibrate abnormally.

• Do not move the shredder while the cutters are

still rotating.

Power supply cable

• The power supply cable should be regularly

inspected for signs of damage or ageing and

only used if in good condition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GA100 T2 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GA100 T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info