Bedienungsanleitung Black Decker GA100 T2 (Seite 3 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

586385

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

• Always keep the power supply cable away from

the machine - be aware of its position at all times.

• Never carry your machine by the cable or jerk

the cable to separate the connectors. Keep the

cable away from heat sources, oils or sharp

edges. Check the condition of your cable before

use and do not use if damaged.

• You can use an extension cable up to 40m

(130ft). This must be 2 core only, not lighter than

PVC sheathed flexible cord, code designation

H05VV-F, with 1.0mm

copper cross section.

For Australia/New Zealand use extension cords

complying to all regulations.

Clothing

• Always wear gloves when operating the

shredder (H4).

• We recommend the wearing of protective eye

glasses when operating the shredder (H2).

• To protect your feet, always wear stout shoes

or boots.

• Wearing shoes with rubber or man-made soles

will enhance your safety.

• Do not use the shredder barefoot or in

open sandals.

• Where long trousers to protect your legs.

• Always use ear protection if the sound level (H3)

seems uncomfortable when using your machine.

• Do not wear loose jewellery.

• Protect long hair from contact with the shredder.

Safety of others

• Do not allow children or any person who has not

read this instruction leaflet or who is not familiar

with the shredder to operate it.

• Do not allow children, animals or other persons

near your machine when in use - always keep

them at least 6m (20ft) away from the shredder.

• Remember that the operator/user is responsible

for accidents or hazards occuring to other

people or their property.

Working conditions

• Ensure that the shredder is standing on firm

ground when in use.

• Do not use your shredder in the rain or in

wet conditions (H7).

• Use only in daylight or good artificial light.

Using your machine

• Always be sure your machine is in a safe

operating condition.

• Before using your machine, disconnect it from

the electrical supply and check that the blade,

blade bolts and cutter assembly are not worn or

damaged. Damaged blades and worn bolts are

major hazards and must be replaced.

ion Manual

• Under no circumstances should you attempt to

turn your machine over on to its side whilst

running, or attempt to stop the blade - always

allow it to stop on its own. Do not put hands or

feet near or under rotating parts.

• Never operate the shredder with defective

guards or shields (H6).

• Replace worn or damaged parts for safety.

• Do not look directly into the funnel or shredder

outlet while operating the shredder, as loose

debris may be ejected. We recommend the

wearing of protective eye glasses when

operating the shredder.

• Under no circumstances put your hands in the

cutting area whilst the cutters are still rotating.

The blades will continue to rotate for a short

while after the machine is switched off.

• Never start the shredder without the body and

large feeder funnel being securely attached.

• Do not switch the motor off until the shredder is

completely empty, as it may clog and be difficult

to restart.

• Ensure that no hard objects, e.g. metal, stones

or glass, come into contact with the blades.

Care of your machine

• Store your machine in a dry place when not in

use, out of the reach of children.

• Do not use solvents or cleaning fluids to clean

your machine - use a blunt scraper to remove

grass and dirt. Always disconnect from the

electrical supply before cleaning.

• Do not operate your machine if any parts are

defective; discard all defective parts and fit new

parts before use.

• Use only Black & Decker recommended

replacement parts and accessories.

• Keep all nuts, bolts and screws tight to be sure

your machine is in a safe working condition.

Double insulation

Your machine is double insulated. This

means that all external metal parts are

electrically isolated from the power supply.

This is achieved by placing an extra

insulation barrier between the electrical and

mechanical parts. Double insulation means

greater electrical safety and obviates the

necessity of having the machine earthed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GA100 T2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker GA100 T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info