Bedienungsanleitung Black Decker GT5026 (Seite 6 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

665759

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

Vibration

The declared vibration emission values stated in the

technical data and the declaration of conformity have been

measured in accordance with a standard test method

provided by EN 60745 and may be used for comparing

one tool with another. The declared vibration emission value

may also be used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual

use of the power tool can differ from the declared value

depending on the ways in which the tool is used.

The vibration level may increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons

regularly using power tools in employment, an estimation

of vibration exposure should consider, the actual conditions

of use and the way the tool is used, including taking account

of all parts of the operating cycle such as the times when

the tool is switched off and when it is running idle in addition

to the trigger time.

Labels on tools

The following pictograms are shown on the tool:

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

 If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard

 Electric safety can be further improved by using a high-

sensitivity 30 mA residual current device (RCD).

Using an extension cable

Always use an approved extension cable suitable for the

power input of this tool (see technical data). The extension

cable must be suitable for outdoor use and marked

accordingly. Up to 30 m of 1.5 mm

HO5V V-F extension

cable can be used without loss of product performance.

Before use, inspect the extension cable for signs of damage,

wear and ageing. Replace the extension cable if damaged or

defective. When using a cable reel, always unwind the cable

completely.

Features

1. Front handle

2. Front handle switch

3. Trigger switch

4. Blade

5. Blade sheath

6. Guard

This hedge trimmer has the following features for

your benefit:

 Ergonomically formed handles for comfortable cutting.

 Machined blades for improved cutting.

 Dual action blades for reduced vibration.

Assembly

Warning! Before assembly, make sure that the tool

is switched off and unplugged and that the blade sheath

is fitted over the blades.

Fitting the handle (fig. A)

 Slide the handle (1) over the blades (4).

 Press the handle (1) into the location on the bottom

of the tool.

 Secure the handle with the 4 screws (7) supplied.

Fitting the guard (fig. B)

 Locate the guard (6) into the grooves on the tool.

 Secure the guard (6) using the two screws (8) supplied.

Warning! Never use the tool without the guard.

Fitting the blade tip guard (fig. C)

An optional tip guard (10) is provided to protect the end of the

blades (4) when cutting near a hard surface.

 Align the tip guard (10) with the 2 holes at the end of the

blade support.

 Secure the tip guard with the two screws (9) supplied.

Connecting the tool to the mains (fig. D)

Unless the tool is fitted with a mains cable, you will need

to connect an extension cable to the power inlet.

 Connect the female socket of a suitable extension cable

to the power inlet of the tool.

 Loop the cable through the cable restraint (11) as

shown to prevent the extension cable from becoming

detached during use.

 Insert the mains plug into a mains outlet.

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Wear safety glasses or goggles and ear protection

when operating this tool

Wear gloves when operating this tool.

Immediately disconnect the cable from the mains

if it is damaged or cut.

Do not expose the tool to rain or high humidity.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GT5026 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info