665759

Black Decker GT5026 Seite 7

7
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
7
ENGLISH
Warning! The extension cable must be suitable for outdoor
use. When using a cable reel, always unwind the cable
completely.
Residual risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These include:
Injuries caused by touching any rotating/moving parts.
Injuries caused when changing any parts, blades or
accessories.
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods make sure you take
regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF).
Use
Warning! Let the tool work at its own pace. Do not overload.
Before use, carefully check the tool and mains cable
for damage. Paying attention to guards, switches
and parts.
Ensure that the tool will operate properly and perform
its intended function.
Do not use the tool if damaged or defective.
Do not use the tool if the switch does not turn
it on and off.
If damaged, have the power toll repaired by an
authorised repair agent. Never attempt any repairs
yourself.
Carefully guide the cable in order to avoid accidentally
cutting it. A good way to control the cable is by putting
it over your shoulder.
For your safety, this tool is equipped with a double
switching system. This system prevents starting the tool
inadvertently and will only allow operation while holding
the tool with both hands.
Switching on and off
Switching on
Take hold of the front handle (1) with one hand so that the
front handle switch (2) is pushed into the body of the tool.
With the other hand, squeeze the trigger switch (3) to start
the tool.
Switching off
Release the front handle switch (2) or the trigger switch (3).
Warning! Never attempt to lock a switch in the on position.
Hints for optimum use
Start by trimming the top of the hedge. Slightly tilt the
tool (up to 15° relative to the line of cut) so that the blade
tips point slightly towards the hedge (fig. E). This will
allow the blades to cut more effectively. Hold the tool
at the desired angle and move it steadily along the
line of cut. The double-sided blade allows you to cut
in either direction.
To obtain a very straight cut, stretch a piece of string
along the length of the hedge at the desired height.
Use the string as a guideline, cutting just above it.
To obtain flat sides, cut upwards with the growth.
Younger stems move outwards when the blade
cuts downwards, causing shallow patches in the
hedge (fig. F).
Take care to avoid any foreign objects. Especially avoid
hard objects such as metal wire and railings, as these
could damage the blades.
Regularly oil the blades.
Guidelines for trimming (UK & Ireland)
Trim hedges and shrubs with seasonal leaves
(new leaves every year) in June and October.
Trim evergreens in April and August.
Trim conifers and other fast growing shrubs every
six weeks from May until October.
Guidelines for trimming (Australia & New Zealand)
Trim hedges and shrubs with seasonal leaves
(new leaves every year) in December and March.
Trim evergreens in September and February.
Trim conifers and other fast growing shrubs every
six weeks from October until March.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance, switch off
and unplug the tool.
After use, carefully clean the blades. After cleaning,
apply a film of light machine oil to prevent the blades
from rusting.
Regularly clean the ventilation slots in your tool using
a soft dry brush or dry cloth.
… 7 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker GT5026 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info