Bedienungsanleitung Blaupunkt frankfurt rcm 82 (Seite 15 von 18) (Englisch)

165672

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Frankfurt RCM 82

DEUTSCH

ENGLISH

ITALIANO

PORTUGUES

NEDERLAND

ESPAGÑOL

SVENSKA

FRANÇAIS

Acoustic Signal after the Actuati-

on of a Key (BEEP)

All functions which require for a keystroke

longer than two seconds (e.g. memorizing a

station) are confirmed by an acoustic signal

(BEEP).

For switching the BEEP tone on or off,

● press the DSC button 5.

The display G a gives you “BEEP ON”

or “BEEP OFF”.

● Using the rocker switch << / >> I you

can select between ‘BEEP ON’ (acou-

stic signal on) and ‘BEEP OFF’ (acou-

stic signal off).

For memorizing your adjustment,

● press the DSC button 5 once again.

Choosing the Display Colour

With this set you can match the display colour

to the colour of your vehicle’s dashboard

lighting. You can choose between green and

orange.

For changing the display colour,

● press the DSC button 5.

The display G a gives you “BEEP ON”

or “BEEP OFF”.

● Press the rocker switch << / >> I until

‘COLOUR’ lights up on the display

G a.

For changing the colour,

● press << / >> I,

and the display colour will change.

For storing this adjustment,

● press the DSC button 5 once again.

Theft Protection by Code LED

As a preventive measure, you can let a light-

emitting diode (LED) K blink in the car’s

interior when it is parked.

For modifying the setting,

● press the DSC button 5.

The display G a gives you “BEEP ON”

or “BEEP OFF”.

● Press the rocker switch

/ J until

‘LED’ and a number light up on the dis-

play G a.

● Via the rocker switch << / >> I, you

can adjust the following:

LED 0 - Blinking is off.

LED 1 - LED only blinks if the car

radio is connected via the

ignition.

LED 2 - LED blinks, if the car radio is

switched off (using the ON/

OFF-button, KeyCard or

ignition).

Loudness

Since your in-car sound quality is influenced

by the type of the installation (amplifier), the

type and arrangement of the loudspeakers,

and the vehicle itself, you may individually

programme at which level you want the set to

start boosting the basses (loudness).

For changing this loudness level,

● press the DSC button 5.

The display G a gives you “BEEP ON”

or “BEEP OFF”.

● Now press the rocker switch

/ J

until ‘LOUD’ and a number between 1

and 6 illuminate on the display G a.

● With the rocker switch << / >> I you

can match the above mentioned loud-

ness level to your personal require-

ments.

For memorizing this adjustment,

● press the DSC button 5 once again.

Preset Naming

When you select a station, the display G a

will give you the frequency and for RDS

stations also the station name later on, e.g.

91.3

BBC3. You can replace the frequen-

cy indication of all preset stations without

RDS code by entering an 8-digit name.

Note the following:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt frankfurt rcm 82 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt frankfurt rcm 82

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info