Bedienungsanleitung Bomann GSP 5707 (Seite 19 von 20) (Englisch)

552048

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

12/2011

Problem

Possible Causes

What To Do

Noise Motor hums

Dishwasher has not been used regularly. If you do not use it

often, remember to set it to fill and pump out every week, which

will help keep the seal moist.

Suds in the tub

Improper detergent

Use only the special dishwasher detergent to avoid suds.

If this occurs, open the dishwasher and let suds evaporate.

Add 4 l of cold water to the tub. Close and latch the dishwasher,

then start a short wash cycle to drain out the water.

Repeat if necessary.

Spilled rinse agent Always wipe up rinse agent spills immediately.

Stained tub interior

Detergent with colorant was

used

Make sure that the detergent is the one without colorant.

Dishes and flatware

not clean

Improper program Select a stronger program.

Improper basket loading

Make sure that the action of the detergent dispenser and spray

arms are not blocked by large dishware.

Spots and filming on

glasses and flatware

1. Extremely hard water

2. Low inlet temperature

3. Overloading the dish-

washer

4. Improper loading

5. Old or damp powder

detergent

6. Empty rinse agent dis-

penser

7. Incorrect dosage of

detergent

To remove spots from glassware:

1. Take out all metal utensils out of the dishwasher.

2. Do not add detergent.

3. Choose the longest cycle.

4. Start the dishwasher and allow it to run for about 18 to 22

minutes, then it will be in the main wash.

5. Open the door to pour 2 cups of white vinegar into the bottom

of the dishwasher.

6. Close the door and let the dishwasher complete the cycle.

If the vinegar does not work: Repe

at as above, except use 1/4

cup (60 ml) of citric acid crystals instead of vinegar.

Cloudiness on

glassware

Combination of soft water

and too much detergent

Use less detergent if you have soft water and select a shortest

cycle to wash the glassware and to get them clean.

Yellow or brown film

on inside surfaces

Tea or coffee stains

Using a solution of 1/2 cup of bleach and 3 cups of warm water to

remove the stains by hand.

You have to wait for 20 minutes after a cycle to let the heating

elements cool down

before cleaning interior; otherwise, burns will

happen.

Iron deposits in water can

cause an overall film

You have to call a water softener company for a special filter.

White film on inside

surface

Hard water minerals

To clean the interior; use a damp sponge with dishwasher deter-

gent and wear rubber gloves. Never use any other cleaner than

dishwasher detergent for the risk of foaming or suds.

The detergent dis-

penser lid cannot be

closed properly

Clogged detergent residue

is blocking the catch

Clean the detergent from the catch

Detergent left in

dispenser cups

Dishes block detergent

Cups

Re-loading the dishes properly.

Steam Normal phenomenon

There is some steam coming through the vent by the door latch

during drying and water draining.

Black or gray marks

on dishes

Aluminum utensils have

rubbed against dishes

Use a mild abrasive cleaner to eliminate those marks.

Water standing on

the bottom of the tub

This is normal

A small amount of clean water around the outlet on the tub bot-

tom keeps the water seal lubricated.

Dishwasher leaks

Overfill dispenser or rinse

aid spills

Be careful not to overfill the rinse aid dispenser. Spilled rinse aid

could cause oversudsing and lead to overflow

ing. Wipe away any

spills with a damp cloth.

Dishwasher isn't level Make sure the dishwasher is level.

Error Codes

When some malfunctions happen, the appliance will indicate error codes to warn you

LED’s Codes Meanings Possible Causes

LED 2 = Multi-Tab

LED 3 = Child lock

LED 4 = 9h

LED 5 = 6h

LED 6 = 3h

LED 7 = Start/Pause

LED2, LED3 flash Door open

The door is opened when the dishwasher

is operating

LED2, LED4 flash Water inlet

Water inlet malfunction

LED2, LED5 flash Water drainage

Water drainage malfunction

LED2, LED6 flash Temperature sensor

Temperature sensor malfunction

LED2, LED7 flash Overflow/leakage

Overflow occurs/Water leakage occurs

LED3, LED4 flash Water leakage

Water leakage occurs

LED3, LED5 flash Heating element

Abnormal heating

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GSP 5707 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann GSP 5707

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info