Bedienungsanleitung Bomann KS 263 (Seite 5 von 9) (Englisch)

552085

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

11/2012

NSTALLATION

Location

Sufficient ventilation around the device is necessary in order for the heat to dissipate properly and to

guarantee efficient cooling operation at low power consumption. For this purpose, leave sufficient

space around the device.

- Minimum clearance of 5 cm between rear side and wall,

- at least also 5 cm at both sides and on top of the device.

- Leave proper space in front of the device in order to open the door at an angle of 160°.

IMPORTANT:

- Do not expose the device to direct sunlight.

- Do not place near heaters, next to a stove or any other heat sources.

- Do not use the device outdoors.

- Only install at a location with an ambient temperature suitable for the climate class of the device.

For information on the climate class, please refer to chapter ‘Specifications’ or to the rating label lo-

cated in the interior or on the rear side of the device.

- Avoid installation at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be

susceptible to corrosion under such circumstances.

- Do not place the device near volatile or combustible materials (e.g. gas, fuel, alcohol, paint, etc.)

and in rooms which may have poor air circulation (e.g. garages).

- Only place on a steady and safe surface.

- If the device is not horizontally leveled, adjust the feet accordingly.

Electrical Requirements

Please look at the rating label to know the rating voltage and connect the appliance to the appropriate

power supply. The voltage is 220-240V.

Electrical Connection

Ensure the voltage and frequency of the power being corresponds to those on the rating plate.

Only insert the plug into an electrical socket which is earthed properly. If the electrical socket to

which the appliance must be connected is not appropriate for the plug, let replace the socket by a

specialist, rather than using a adaptors or the like as they could cause overheating and burns.

Grounding Instructions

This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the

risk of electric shock by providing a path of least resistance for the electric current. This appliance is

equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be

plugged into an appropriate outlet that is installed and earthed in accordance with all local standards

and requirements.

WARNING:

- Improper connection of the equipment earthing conductor can result in the risk of an electric shock.

- Check with a qualified electrician if you are in doubt whether the appliance is properly earthed.

- Do not modify the plug provided with the appliance. If the plug does not fit properly to the outlet,

please have a qualified electrician to install a proper outlet.

- If power cord is damaged or has any sign of being broken, special power cord must be selected or

purchased from its manufacturer or service for replacement.

- Protect the mains cable. Ensure that it does not turn into a trip hazard. The wall outlet must be

freely accessible at all times.

- Do not overload the wall outlet; do not use an extension cable. Overloaded cables can cause fire

and electric shock.

- Do not touch the plug with wet hands..

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann KS 263 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann KS 263

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info