Bedienungsanleitung Bomann KS 263 (Seite 8 von 9) (Englisch)

552085

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

11/2012

- Allow warm dishes to cool down before putting them in the device.

- Do not open the door longer then necessary.

- Only set the temperature as low as needed. The ideal temperature in the fridge is 7°C.

It should be measured in the upper shelf, as far as possible in the front.

- The device should be defrosted regularly.

- Make sure the door sealing is in good order for the door to close properly.

AINTENANCE

LEANING

Cleaning and Care

For hygienic reasons, clean the interior and accessory parts regularly.

WARNING:

- Always disconnect the plug or turn off/ unscrew the fuse before cleaning. Pull the plug and not the

cable.

- Do not use steam cleaners for cleaning the device; moisture could enter electrical components.

Risk of electric shock! Hot steam could damage the plastic parts. The device must be dry before

restarting operation.

- Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or

cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with

such substances. Do not use abrasive cleaning agents.

Pls. do as follows:

- Remove all food and keep covered at a cool location.

- Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).

- After thorough drying, restart operation.

WARNING:

- Do not bend the cooling coils.

- Do not use arenaceous abrasives.

Reverse the Bulb

Lamp specifications: 220-240V, max. 10W

To turn off the device, set the temperature control to setting 0 - OFF.

Disconnect the plug or turn off the fuse!

- Remove the screw from the lamp cover.

- Press on the lamp cover and remove to the back.

- Replace defect illuminant.

- Reattach the lamp cover and fasten the screw.

- Reconnect the device and turn on.

Repairs

WARNING

Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs

constitute a risk for the user and will void the warranty!

What if . . . Troubleshooting

The design of the device ensures a trouble-free operation as well as a long life cycle. Nevertheless, if

any defect occurs during operation, please check if it is caused by improper operation.

The following problems can be solved by you by checking for the possible cause.

PROBLEM

POSSIBLE CAUSE

SOL

TION

The device is

not working

prop

erly or at

all

Is the plug securely connected to the mains?

Has the safety mechanism of the wall socket

been triggered?

Is the temperature control properly set?

Is the place unqualified?

Do food items or shelves and/or drawers

prevent

the door from closing properly?

Is the ventilation of the device hedged?

Connect the plug properly to the sock

et, turn on

the fuse, and contact a technician if necessary.

Check the settings.

Check the ambient temperature.

Arrange the food or shelves and/or drawers

properly.

Clear the ventilation slits, install the device freely

Loud noise

during opera-

tion

Does the device not stand vertical or horizontal?

Adjust the feet accordingly.

Liquid flow sounds in the cooling circuit are

normal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann KS 263 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann KS 263

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info