582989
2
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
7
Overview of programmes > Refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max.
Type of
laundry Additional functions; information
Resistentes/Algod.
(Cottons/clrds) : - 90 °C
7 kg/
4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of
cotton or linen
TurboPerfect i*, EcoPerfect j,Fácil (Easy-iron), Skin Care
(Water plus)
+ Prelav. (Prewash)
Clinic Wash Ă: - 60 °C Hard-wearing fabrics made of cotton or linen
TurboPerfect i*, EcoPerfect j,Fácil (Easy-iron), Skin Care
(Water plus);
for particularly sensitive skin, longer wash cycle at selected tempera-
ture, higher water level, additional rinse cycle
Sintéticos (Easy-care) : - 60 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
TurboPerfect i, EcoPerfect j,Fácil (Easy-iron), Skin Care (Water
plus)
+ Prelav. (Prewash)
Mix (Mixed fabrics) : - 40 °C Fabrics made of cotton or easy-care fabrics TurboPerfect i, EcoPerfect j,Fácil (Easy-iron), Skin Care (Water
plus); different types of laundry can be washed together
R. de cama (Bed linen) : - 40 °C Delicate bed linen or dark-coloured fabrics made of
cotton and dark easy-care fabrics
TurboPerfect i, EcoPerfect j,Fácil (Easy-iron), Skin Care (Water
plus); Reduced rinse and final spin cycle
Delicado/Seda
(Delicates/silk) : - 40 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin,
synthetic fibres or blended fabrics (e.g. curtains)
TurboPerfect i, EcoPerfect j,Fácil (Easy-iron), Skin Care (Water
plus); No spin between rinse cycles
ÿ Lana/Lã (Wool) : - 40 °C Handä or machine-washable fabrics made of wool or
containing wool
Particularly gentle wash programme to avoid shrinkage of laundry,
longer programme breaks (fabrics rest in the detergent solution)
Rápido 15 (Rapid) : - 40 °C Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
Short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Sport $: - 40 °C Fabrics made from microfibre TurboPerfect i, EcoPerfect j,Fácil (Easy-iron), Skin Care (Water
plus)
Additional programmes 2 (Rinse), Centrif. adicional (Spin), > (Drain), Centrif. delicado (Gentle spin)
*Reduced load for additional TurboPerfect i function.
As a short programme, Mix (Mixed fabrics) 40 °C, with a maximum spin speed, is ideal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartments I and II.
8908 / 9000436761
9000436761 WAE24472EP /...
Robert Bosch Hausgeräte GmbH
Carl-Wery Str. 34
81739 München / Germany
8
Safety instructions
Read the instruction manual and installation instructions and all other information enclosed with the washing
machine and act accordingly.
Retain the documents for subsequent use.
Risk of electric shock Never pull the cable to disconnect the mains plug.
Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover / cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury The washing machine door can become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine is in operation.
Consumption values
Programme Additional
function Load Electricity
consumption***Water*** Programme
duration***
Resistentes/Algod. (Cottons) :7 kg 0.25 kWh 60 l 2:36 h
Resistentes/Algod. (Cottons) 40 °C** 7 kg 0.69 kWh 60 l 2:36 h
Resistentes/Algod. (Cottons) 60 °C** 7 kg 1.33 kWh 60 l 2:39 h
Resistentes/Algod. (Cottons) 60 °C* EcoPerfect j7 kg 1.05 kWh 47 l 3:08 h
Resistentes/Algod. (Cottons) 90 °C 7 kg 2.00 kWh 64 l 2:47 h
Sintéticos (Easy-care) 40 °C** 3 kg 0.55 kWh 55 l 1:17 h
Mix (Mixed fabrics) 30 °C 3 kg 0.24 kWh 32 l 1:03 h
Delicado/Seda (Delicates/silk) :2 kg 0.06 kWh 31 l 0:41 h
Delicado/Seda (Delicates/silk) 30 °C 2 kg 0.21 kWh 31 l 0:41 h
Lana/Lã (Wool) :2 kg 0.10 kWh 39 l 0:40 h
Lana/Lã (Wool) 30 °C 2 kg 0.19 kWh 39 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
As a short programme for coloureds, select the programme Mix (Mixed fabrics) 40 °C with the maximum spin speed.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Care
Before washing for the first time
Do not put any laundry in the machine. Turn on the tap, add approximately 1 litre of water and then
½ a measuring cup of detergent into compartment II. Turn the programme selector to Sintéticos (Easy-
care) 60 °C and choose Inicio/Pausa + Carga (Start/Pause). At the end of the programme, turn the
programme selector to Stop.
Machine housing, control panel
Wipe with a soft, damp cloth.
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Remove detergent and cleaning agent residue immediately.
Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove draw completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not be
necessary if the correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool
down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Stop and disconnect the mains plug.
2. Drain the detergent solution -> page 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16 Close the washing machine door properly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter > page 10, Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump -> page 10. Drainage hose
/ waste pipe blocked; Clean the drainage hose at the siphon -> page 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, appliance leaking. Call customer services.
Risk of electric shock. Disconnect the
mains plug.
Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to
Stop
and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the
retainer and pull it from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover
until the detergent solution begins to flow out. When the service flap is
half full, close the pump cover and empty the service flap. Repeat the
above steps until all the detergent solution has completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in
the detergent solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the > (Drain) programme.
Drainage hose at the siphon
Turn the programme selector to
Stop
and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual
water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose
clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2.
Select any programme (apart from
Centrif. adicional
(Spin) /
>
(Drain)).
3. Choose Inicio/Pausa + Carga (Start/Pause)
. Let the programme run for
approximately 40 seconds.
4. Turn the programme selector to Stop. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
Risk of scalding.
Allow the detergent solution to cool down.
Turn off the tap.
11
What to do if ...
ʑWater is leaking out. Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
Inicio/Pausa + Carga (Start/Pause) not selected?
Tap not turned on?
Filter blocked? Clean the filter -> page 10.
Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
Safety function active. Programme stopped? -> page 4.
c(without final spin) selected?
-> page 3, 4.
Can be opened by emergency release only?-> page 9.
ʑProgramme does not
start.
Inicio/Pausa + Carga (Start/Pause) or (Finished in) time selected?
Washing machine door closed?
Childproof lock active? Deactivate -> page 5.
ʑDetergent solution is not
drained.
c(without final spin) selected?
-> page 3, 4.
Clean the detergent solution pump -> page 10.
Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
Not a fault - water below the visible area.
ʑSpin result not
satisfactory.
Distribute large and small items of laundry evenly in the drum.
Fácil (Easy-iron) selected? > page 5.
Selected speed too low? > page 5.
ʑSpin cycle performed
several times.
Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑResidual water in the
compartment for care
products.
Not a fault - the action of the care product is not affected.
Clean the insert if necessary -> page 9.
ʑOdour formation in the
washing machine.
Run programme Resistentes/Algod. (Cottons/clrds) 90 °C without
laundry. Use standard detergent.
ʑStatus display³þ
flashing.
Appliance has detected
a detergent overload.
Too much detergent used?
If foam is escaping from the detergent drawer:
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into compartment II (not with outdoor or down fabrics).
Reduce the detergent dosage for the next wash cycle.
ʑIntense noise formation,
vibrations and
wandering during the
spin cycle.
Are the appliance feet fixed?
Secure the appliance feet > Installation instructions.
Transportation safety devices removed?
Remove the transportation safety devices > Installation
instructions.
ʑDisplay panel/indicator
lamps do not function
during operation.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑProgramme sequence
longer than usual.
Not a fault - unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑDetergent residues
on the laundry.
Occasionally, phosphate-free detergents contain water-insoluble
residues.
Use the (Rinse) cycle or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
Turn the programme selector to Stop and remove the mains plug from the socket.
Turn off the water supply and call customer services > Installation instructions.
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch WAE24468GB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info