56
lay
> is
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋjÿ>$Ăg.
c>nt
on
~uʋʋʋIndividual settings
ʑOptions buttons
You can change the spin speed and the temperature before the selected programme starts
and while it is running. The effects depend on the programme progress.
ʑV (Temperature)
You can change the displayed washing temperature. The maximum selectable temperature
depends on the current programme.
ʑ (Finished in)
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The "finished in" time can be set in
increments of one hour up to a maximum of 24 hours. Press the (finished in) button
repeatedly until the required number of hours is displayed (h = hour). Press Inicio/Pausa +
Carga(Start/Pause).
ʑ (spin speed in rpm)
You can change the displayed spin speed. The maximum selectable spin speed depends on
the model and on which programme is currently selected.
ʑAdditional functions > and overview of programmes, see page 7
TurboPerfect iFor washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load > Overview of
programmes, page 7.
EcoPerfect jFor saving energy with a washing performance comparable to that of
the standard programme.
Fácil S(Easy-iron)
Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
Skin Care
(Water plus)
Increased water level and additional rinse cycle, extended washing
time. For areas with very soft water or for further enhancing the spin
result.
ʑChildproof lock and reloading
$Childproof lock/
Appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON/OFF: Press and hold the Inicio/Pausa + Carga(Start/Pause)
button for 5 seconds after the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES +oReload
If you want to add subsequent items of laundry after the programme
has started, press the Inicio/Pausa + Carga(Start/Pause) button. The
machine checks whether reloading is possible.
YES + illuminated: Reloading is possible.
NO flashes: wait until YES + light up.
Note: do not open the door until both the YES + symbols are lit.
NO: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the
Inicio/Pausa + Carga(Start/
Pause)
button.
ʑInicio/Pausa + Carga (Start/Pause)
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑSignal
Important information
Protecting the laundry and the machine
Empty pockets.
Look out for metal items (paperclips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the additional function TurboPerfect i.
Pre-treat any stains as necessary.
intense Do not load as much laundry.
Choose a programme with pre-wash (pre-wash at 30 °C).
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the
programme selector to Resistentes/Algod. (Cottons/clrds) 30 °C and press Inicio/Pausa + Carga(Start/
Pause). After approx. 10 minutes, press Inicio/Pausa + Carga(Start/Pause)to pause the programme. Once
the required soaking time has elapsed, press Inicio/Pausa + Carga(Start/Pause) again to continue the
programme, or select a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the
manufacturer's instructions into fabric softener compartment ~ (rinse first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's instructions! Do not use the washing machine for bleaching clothes!
