666583
3
Zoom out
Zoom in
Vorherige Seite
1/5
Nächste Seite
Delta-Sander
item-no. 12370
CE
This tool is interference-suppressed
according to
CE EN 55014 + EN 61000
I N S T R U C T I O N - M A N U A L
Before using electric power-tools, please read and
understand the attached safety-instructions!
The Delta-Sander is used for grinding jobs of different
materials, especially at corners or edges.
Additional safety-hints for Delta-Sanders:
Be sure to wear a dust-mask during all grind-
ing jobs.
Be sure the machine is switched off, before con-
necting to the power-outlet.
Remove all nails, screws or other metal-parts from
the surface of your workpiece, in order to prevent
damages of the sanding-paper or the velcro-plate.
Do not try to work on extremely small workpieces.
Protect your workpiece against slipping. Probably
you have to use clamps, to fix your workpiece.
Do not start sanding, before the machine has
reached its maximum speed.
Do not touch moving parts of the machine by your
hands during your work.
Do not stop the machine by pressing the sanding-
plate, after having switched-off the machine.
Be sure, that the machine has come to a comple-
te stop, before laying-down.
Attention! The Delta-Sander must not be used
for wet grinding jobs!
Discription
6. On-/Off-switch
7. Speed adjustment
8. Sanding-plate with velcro-sheet
9. Sanding paper
10. Adaptor for vacuum-cleaner
Technical dates
Voltage 230 V-/50 Hz
Power consumption 280 W
No-load speed 6.000-9.000 min
-1
Size of sanding paper 90x90x90 mm
Sound pressure level (LPA) 70,5 dB(A)
Sound power level (LWA) 83,5 dB(A)
Vibration 5,8 m/s²
(according to EN 50144/13)
Protection class / II
Be sure to wear dust-mask and ear-protection
during use!
Recommended nominal operating time: approx. 20
minutes under permanent load.
Rest after permanent operation: approx. 5-10 minu-
tes.
Changing the sanding-paper
Do not use damages and worn-out sanding-paper.
Always disconnect the machine from the power-
supply, before changing the sanding-paper.
Remove the worn-out sanding-paper from the
velcro-plate. When mounting a new sanding-
paper, let the holes in the sanding-paper fit with
the holes in the velcro-plate.
Always clean the velcro-plate, when changing the
sanding-paper.
Due to the triangular shape of the sanding-paper
and the construction of the sanding-plate, the
machine is suitable for jobs at hard-to-reach
places, e.g. edges, angles etc., which can only be
reached with the tip or the edge of the sanding-
paper.
Whenever one tip or edge of the sanding-paper is
worn-out, just remove, turn by 120° and fix again
on the velcro-plate, as described above.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bruder Mannesmann 12370 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info