• When the call is answered, proceed with your
conversation and replace the handset on completion.
To change numbers stored in the memory
To change or replace telephone numbers stored in
the MEMORY, simply repeat the process used for
storing the original numbers, but key in the new
number. The number stored in that location is
automatically replaced with the new one you are
entering.
Additional features
To redial a telephone number at the touch of
a button
• Pick up the handset.
• Press the REDIAL button.
• The last dialled number is redialled automatically
and shown on the display.
Using the secrecy button
Using the SECRECY button allows you to talk to
someone in the same room whilst on a call, without
the person on the other end of the line hearing your
conversation.
• During a call, press and release the SECRECY
button. You will now be able to talk without the
person on the other end of the line hearing your
conversation.
• The SECRECY LED will glow.
• Release the SECRECY button again to continue
your call.
Using the Call timer facility
Relate 600 allows you to time the length of a call
simply by pressing the timer button. The display
shows the time in minutes and seconds.
• Lift the handset and dial the number required.
• When your call is answered, press timer button,
the display will show the length of the previous call.
• Press the timer button again to start the timer.
• The timer will automatically stop when the handset
is replaced.
Using the ‘Call My Bill’ function
• Pick up the handset.
• Press the CALL MY BILL button.
• Listen to the billing information about your last
phone bill.
• Replace the handset.
Using Call My Bill and button C as extra
memory stores
To re-programme Call My Bill and button C
• Pick up the handset and lift the directory label.
• Press START button A (a single ‘beep’ will be heard).
• Press button C or CALL MY BILL button.
• Key in the phone number you wish to store
(up to 16 digits).
• Press button B to confirm (two ‘beeps’ will be
heard).
• Replace the handset and directory label.
To restore button Call My Bill and button C
(to factory setting)
• Pick up the handset and lift the directory label.
• Press START button A (a single ‘beep’ will be
heard).
• Press button C or CALL MY BILL button twice.
• Press button B to confirm (two ‘beeps’ will be heard).
• Replace the handset and directory label.
Using the recall button
If your Relate 600 is connected to a PBX, the RECALL
button enables you to use features provided by the
switchboard. Please contact your communications
manager or PBX supplier for details.
The RECALL button can also be used in conjunction
with BT Select Services.
Using your Relate 600 with a PBX
If your Relate 600 is to be connected to switchboard,
make sure that the switchboard uses Timed Break
Recall. For further help and advice with this, contact
BT on FREEfone 0800 800 154.
