Bedienungsanleitung Caldera Vacanza - serie 2018 (Seite 34 von 40) (Englisch)

784923

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Spa Care and Maintenance

FILTER CARTRIDGES REMOVAL &

CLEANING FOR AVENTINE MODEL

(USE MONARCH FILTER CLEANER)

1. Turn the power to the spa OFF, then proceed as follows:

2. Push down slightly and turn filter basket counterclockwise to unlock,

then pull the basket and weir out.

3. Carefully pull up the filter cartridge and bring it out of the spa.

4. Rinse cartridge using a garden hose. Rotate and separate filter

pleats while spraying water to remove all debris possible. Let the

filter dry and then look for calcium deposits (scaling) or an oil film. If

you find these, you will need to deep clean your filter cartridge with

a “spa filter cleaning” solution to break down and remove mineral

deposits and oils.

5. Install filter then replace basket and weir by inserting and rotating

clockwise to lock into position.

CARE OF THE SPA PILLOWS

The spa pillows will provide years of comfort if treated with care. They

have been positioned above the water level to minimize the bleaching

effects of chlorinated water, and other spa water chemicals. To extend

their life, whenever the spa shell is being cleaned, the spa pillows should

be removed and cleaned. Body oils can be removed with a mild soap

and water solution. ALWAYS rinse off the spa pillows thoroughly to

remove any soap residue. If the spa is not going to be used for a long

period of time (that is during a vacation, or if the spa is winterized), or

when the spa water is being super-chlorinated, the spa pillows should be

removed until the next spa use.

To remove and replace the spa pillows:

1. Carefully lift one end of the pillow away from the spa shell.

2. Continue lifting one end until all pillow retainers are released from

the pillow.

IMPORTANT: Just pulling the pillow straight up and out of the shell

recess will eventually damage the pillow. This abuse is not covered

under warranty.

3. To reinstall the spa pillow, carefully bend the pillow slightly to allow

one of the pillow retainers to slip into the recess in the back of the

pillow.

4. Keeping the pillow slightly bent, slide the other pillow retainer into

the recess in the back of the pillow.

5. After all the pillow retainers are in place, press the pillow down into

the recess in the spa shell.

CARE OF THE EXTERIOR

SPA SHELL

Your CALDERA spa has an acrylic shell. Stains and dirt generally will not

adhere to your spa’s surface. A soft rag or a nylon scrubber should easily

remove most dirt. Most household chemicals are harmful to your spa’s

shell (see below for detailed information on cleaning agents). Always

rinse off any spa shell cleaning agent with fresh water.

IMPORTANT:

1. The following products are the ONLY approved cleaning agents

for your

CALDERA

spa shell: plain water,

CALDERA

Spa Shine,

Brillianize® or Soft Scrub®. The use of alcohol or any other

household cleaner other than those listed to clean the spa shell

surface is NOT recommended. DO NOT use any cleaning products

containing abrasives or solvents since they may damage the shell

surface, specifically: Simple Green®, Windex® or Spa Mitt. NEVER

USE HARSH CHEMICALS! Damage to the shell by use of harsh

chemicals is not covered under the warranty. Always rinse off any

spa shell cleaning agent with fresh water.

2. Iron and copper in the water can stain the spa shell if allowed to go

unchecked. Ask your

CALDERA

dealer about a Stain and Scale

Inhibitor to use if your spa has a high concentration of dissolved

minerals. (Watkins recommends Stain & Scale Defense.)

3. Keep all cleaners out of the reach of children and use care when

applying.

CARE OF THE ECOTECH CABINET

The ECOTECH cabinet consists of rigid polymers that combine the durability of

plastic, with the beauty of wood.

Cleaning your ECOTECH cabinet is as easy as spraying the cabinet with a mild

soap and water solution to remove any stains and residue.

CARE OF THE SPA COVER

WARNING: The cover is a manual safety cover that meets or

exceeds all prevailing requirements of ASTM 1346-91 for spa safety

covers when installed and used correctly as of the date of manufacture.

Non-secured, or improperly secured covers are a hazard.

Open the cover to its fully open position before use.

FILTER

CARTRIDGE

BASKET

WEIR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caldera Vacanza - serie 2018 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caldera Vacanza - serie 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info