ENGLISH
12
Sub-woofer Low Pass Filter (LPF)
User has 5 seconds to use the encoder volume knob to select the 4 different Low Pass filter Flat, 80Hz, 120Hz or 160Hz.
The Sub-woofer LPF control is only applicable if the unit is equipped with the optional subwoofer line out, and only
if the unit is connected to an optional sub-woofer speaker.
The Sub-woofer LPF option will only appear in the Audio Menu if the “Sub-woofer” function is activated by pressing
the “Sub-w” button on control panel.
X-BASS
User has 5 seconds to use the encoder volume knob to select the 3 different Bass Boost level: Low, Mid, or High.
BASS
BASS LEVEL(Level)
User has 5 seconds to use the encoder volume knob to adjust the desired Bass level range from -6 to +6.
BASS -CFQ (C.Frq).
User has 5 seconds to use the encoder volume knob to adjust the desired Bass Center Frequency to 60Hz, 80Hz, 100Hz,
or 200Hz.
BASS-Q: (BassQ)
User has 5 seconds to use the encoder volume knob to adjust the desired Bass Quality Factor to 2N, 1N, 1W or 2W.
Figure 1 shows the Bass Quality factor (Curve characteristics) of each step.
MIDDLE
MIDDLE (LEVEL)
User has 5 seconds to use the encoder volume knob to adjust the desired Middle level range from -6 to +6.
MIDDLE-CFQ (C.FRQ)
User has 5 seconds to use the encoder volume knob to adjust the desired Middle Range Center Frequency to 500Hz,
1KHz, 1.5KHz, or 2.5KHz.
MIDDLE-Q (MID-Q)
User has 5 seconds to use the encoder volume knob to adjust the desired Middle Quality Factor to 2N, 1N, 1W or 2W.
Figure 2 shows the middle Quality factor (Curve characteristics) of each step.
DUAL ZONE OPERATION
“2-ZONE” DUAL A/V ZONE MULTI ENTERTAINMENT OPERATION:
This unit is equipped with the most advanced “Dual A/V Zone” feature.This function is useful if the user would like to select
different modes of the Audio and Video (AV) output source for Front and Rear Speakers and TFT Screens. For example, user
can select to listen to Tuner music for front speakers and rear speaker for DVD movie.And if the user has One or more
TFT screens installed in the rear seat or inside the Car, the Dual A/V Zone function allow the users to enjoy TWO different
Video sources. For example, on the front in-dash Built-In TFT screen can display the video from the Game Console and the
other screen in the rear seat can display video from DVD Movie or other A/V source.The detail operation as follow:
ON/OFF OPERATION
- “Off” is the default setting.
- Long press the “2-Zone” button on the control panel or remote control to switch between Dual Zone On or Off.The
“2-Zone” will appear on the LCD after Dual Zone is selected “on”.
TO SELECT FRONT / REAR AV SOURCES
- Once “ON” is selected, Short Press the “AUDIO” button repeatedly to change between the F-Zone (Front ) and the R-
Zone (Rear) sources.
- If Front Zone “F-Zone” is selected, user have 10 seconds to use the Volume UP / DOWN button to navigate through
different modes:Tuner > DVD > AV - In are available for selection for Front AV Output.
- If Rear Zone “R-Zone” is selected, user have 10 seconds to use the Volume UP / DOWN button to navigate through
different modes:Tuner > DVD > AV - In are available for selection for Rear AV Output
- If no selection is being made within 5 seconds, the unit will resume to the previous mode.
TO OPERATE FUNCTION OF FRONT / REAR SOURCES
- The Front Panel & Remote control, is defaulted to control the FRONT source's function / operation.
- When DUAL ZONE is turned “ON”, the Mode button is used to change between the Front Source & Rear Source.
Press the mode button repeatedly to change between Front and Rear
- The LCD will display the Rear Source mode for 10 seconds. User has 10 seconds to make the desired operation on the
Rear Source's function on the Front Panel or Remote The LCD will automatically switch back to the Front Source after
10 seconds.And the Front Panel and Remote now is resumed to operate for Front Source's function again.
THE DEFAULT SETTING WHEN DUAL ZONE IS “ON”
- When DUAL ZONE is turned on, the audio output will be muted for about 1 second.
- The default source / mode for Front ZONE is Tuner & for Rear ZONE is “DVD”
- The default Volume level is “12” for both Front & Rear ZONE audio output. (or the Volume Level set as VOL PGM Level
set in the Menu)
- The LCD display is defaulted to display the Front Mode.
- When Dual Zone is “ON”, the audio functions Bass / Treble / Middle / Balance / Fader / Sub-woofer / iX-bass will not be
available.
THE DEFAULT SETTING WHEN DUAL ZONE IS IN “OFF” MODE
- The default audio output reverts to what the user selected for the FRONT Zone source when DUAL ZONE IS “OFF”.
For example:When the DUAL Zone is “ON “, user has selected DVD for Front ZONE & Tuner for Rear ZONE. Once
DUAL ZONE is turned “OFF”,Audio Output for all 4 speakers becomes “DVD” mode.
AUDIO OPERATION
AUDIO MENU
Short Press “AUDIO“ button to access the Audio Menu. User can navigate thru the Audio Menu items by pressing the /
“AUDIO” button repeatedly, or by pressing the Tuning Up or Tuning Down Button. Once the desired menu item appears on
the display, adjust that option by using the encoder volume knob within 5 seconds.The following menu items can be adjusted
as described above.The unit will automatically exit the Audio Menu after five seconds of inactivity.
SUBWOOFER
Sub-woofer (Level)
User has 5 seconds to use the encoder volume knob to adjust the Sub-woofer lever from '00' to
The Sub-woofer level control is only applicable if the unit is equipped with the optional subwoofer
line out, and only if the unit is connected to an optional sub-woofer speaker.
The Sub-woofer level control option will only appear in the Audio Menu if the “Sub-woofer”
function is activated “ON” by pressing the “Sub-w” button on control panel.
