Bedienungsanleitung Cambridge SoundWorks Desktop Theater 5.1 DTT2500 Digital (Seite 7 von 26) (Englisch)

750733

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Speaker PlacementInstallation Sequence

1. Read all of the instructions

before installing the speaker

system.

2. Using the placement instruc-

tions as a guide, position the

satellites, the center channel

speaker and subwoofer around

your computer. Install the

Desktop Stands and Floor

Stands as appropriate. If you

wish to substitute a powered

subwoofer for the subwoofer

that comes with the DTT2500

Digital, read Substituting a

powered subwoofer page 5.

3. Connect the satellite speakers,

center channel speaker, and

subwoofer to the back of the

Decoder Amplifier.

4. Connect the Dolby Digital output

of your digital program source

(typically a DVD player) to the

Dolby Digital input of the

Decoder Amplifier.

5. Connect your normal audio

signal sources via the Line In

and Rear In inputs. An owner of

a Sound Blaster Live! sound

card with a Digital DIN output

should use the supplied cable to

connect it to the Digital DIN

input instead.

6. With the Decoder Amplifier’s

power switch “off”, connect the

power supply adaptor to the

Decoder Amplifier.

7. Turn on the power. Use the

SPEAKER TEST mode to position

and balance the speakers.

8. You may wish to experiment

with speaker placement briefly

before concealing the connecting

cables and making the installa-

tion more permanent.

9. The unit is ready for you to

enjoy. Refer to the Quick

Reference guide for information

about settings for specific

program sources like DVD, CDs,

Video CD and games.

The Front Satellites. The left front

and right front satellites play

stereo music, the off-screen sounds

of video playback and the front

channels of four channel games.

These satellites should be placed

to the sides of your monitor (see

Diagram A). Be sure to have a

clear line of sight from your

listening position to these

satellites. The satellites intended

for front placement have 3 meters

(9 feet) of cable.

Install the satellite’s Desktop

Stands when using them on the

desktop (see page 6).

The satellites may also be hung

on the wall behind the monitor

using the screw and wall anchors

provided (see Mounting The

Speakers, page 7).

If you wish to save desktop

space, use the hook and loop

fasteners to attach the satellite

speakers to the sides of the

computer monitor (see Diagram B).

The Center Channel Speaker. The

center channel speaker provides

the on-screen effects and dialog in

Dolby Digital, Dolby Surround or

Creative Multi Speaker Surround

modes. It should be placed as close

to the center of your computer

monitor as possible.

CREATIVE

MULTI SPEAKER SURROUND

DTT 3500 DIGITAL

MUSIC MOVIE FOURPOINT

DOLBY

DIGITAL

DOLBY SURROUND AUDIO MODE SPEAKER TEST MUTE

LL RR

MASTER CENTER SUBWOOFER SURROUND

PRO LOGIC

ANALOG IN

DIGITAL IN

POWER

STEREO

0420000547 REV. B SINGLE 2/9/01, 1:50 PM7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge SoundWorks Desktop Theater 5.1 DTT2500 Digital Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info