Bedienungsanleitung Canon jx210p (Seite 72 von 86) (Englisch)

424325

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

71Troubleshooting

 Printing Stops Before It Is Completed

 Printing Speed Not as Fast as Expected

 Printer Status Monitor Is Not Displayed

 The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is

Displayed

If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, the confirmation screen

asking to send the machine usage information will be displayed three months and then six

months after the installation. After that, it will be displayed every half a year for about four years.

Cause Action

Printing documents with plenty of

photographs or illustrations.

Printing large data such as photos or graphics takes time for the machine and

the computer to process, during which the machine may appear to have

stopped operating.

In addition, when printing data that uses a large amount of ink continuously on

plain paper, the machine may pause temporarily. In either case, wait until the

process is complete.

Note

If you are printing a document with a large printing area or printing multiple

copies of a document, printing may pause to allow the ink to dry.

The machine has been printing

continuously over a long period.

If the machine has been printing continuously for a long time, the Print Head

may overheat. To protect the Print Head, the machine may stop printing at a line

break for a period of time and then resume printing.

In this case, interrupt your print session at a convenient time and turn the

machine off for at least 15 minutes.

Additionally, if the machine has been printing graphics or photos with intense

colors continuously over a period of time, the machine may stop printing to

protect the Print Head. In this case, printing will not resume automatically. Turn

the machine off for at least 15 minutes.

Caution

The Print Head and the surrounding area can become extremely hot inside the

machine. Never touch the Print Head or nearby components.

Paper may not be loaded correctly. Make sure that paper is loaded in the Rear Tray.

If the machine has run out of paper, load paper.

Note

Printing speed may not improve noticeably by following the instructions below, depending on your

system environment.

Cause Action

Print quality is set too high. Change the print quality setting appropriately in the printer driver.

(1)Open the printer properties dialog box.

Refer to the On-screen Manual.

(2)On the Main sheet, select Standard or Draft for the Print Quality setting.

Cause Action

Printer status monitor is not enabled. Make sure that Enable Status Monitor is selected on the Option menu of the

printer status monitor.

(1)Open the printer properties dialog box.

Refer to the On-screen Manual.

(2)On the Maintenance sheet, click View Printer Status.

(3)Select Enable Status Monitor on the Option menu if it is not selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon jx210p Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon jx210p

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info