Bedienungsanleitung Casio 5325 (Seite 7 von 9) (Englisch)

624831

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Operation Guide 5325

E-48

 After 10 lap times are recorded, the b Lower Dial Hand will point to the mark. This indicates that no

more lap times will be recorded.

 If you perform a lap time operation that is not recorded (because 10 times are already in memory) and

that lap is the fastest lap, it will be recorded as the fastest lap.

 Performing a new elapsed time operation after resetting the stopwatch will delete previously recorded

lap times.

 An ongoing elapsed time measurement operation is not affected by pulling out the crown.

 The x

Second Hand, which indicates the 1/20 (0.05)-second count during stopwatch operation, moves

only 30 seconds after an elapsed time measurement operation is started or restarted, or after a lap time

is cleared. After that, the x

Second Hand stops.

 When elapsed time passes 60 minutes, the z

Hour Hand and v Upper Dial Hand will perform one full

rotation.

To recall lap data

1. While in the Stopwatch Mode, pull out the crown to enter the Data Recall Mode.

2. Rotate the crown to select other laps.

 The b

Lower Dial Hand will indicate the lap number of currently shown time.

 The b

Lower Dial Hand will indicate FL (fastest lap) when the fastest lap time is shown.

3. To return to the Stopwatch Mode, push the crown back in.

E-49

Using the Countdown Timer

The countdown timer can be conﬁ gured within a range of one minute to 60 minutes. An alarm sounds for

about 10 seconds when the timer reaches zero.

Hands and Indicators

x Second Hand: Indicates countdown or elapsed seconds.

c Minute Hand: Indicates countdown or elapsed minutes.

b Lower Dial Hand: Points to TR.

 All hands move counterclockwise during a countdown.



E-50

To specify the countdown start time

1. In the Timekeeping Mode, press C three times to enter the Countdown

Timer Mode.

 The b

Lower Dial Hand will move to TR.

2. In the Countdown Timer Mode, pull out the crown. This enters the

countdown start time setting mode.

 If you do not perform any operation with the crown for about two minutes

after pulling it out, crown operations will become disabled and the hand

will not move if you rotate the crown. If this happens, push the crown back

in and then pull it out again.

3. Rotate the crown to set the countdown start time.

 The maximum countdown start time setting is 60 minutes. To set a

countdown start time of 60 minutes, move the c

Minute Hand to 12 o’clock.

 See “Using the Crown” (page E-3) for information about high-speed hand

movement.



E-51

To perform a countdown timer operation

A B

Start Stop Zero Reset

 A time-up alert sounds for 10 seconds when the countdown reaches 0, and then the timer displays the

start time.

 The alarm will not sound if battery power is low.

 Pulling out the crown while a countdown is in progress will stop the countdown and enter the

countdown start time setting mode.

Important!

 Time calibration signal reception is disabled while the watch is in the Countdown Timer Mode.

To stop the alarm

Press any button.

E-52

Using the Alarm

When the alarm is turned on, an alarm will sound for about 10 seconds each day when the time in the

Timekeeping Mode reaches the preset alarm time. This is true even if the watch is not in the Timekeeping

Mode.

Hands and Indicators

z Hour Hand: Indicates the currently set alarm time hour.

x Second Hand: Indicates the current alarm ON/OFF setting.

c Minute Hand: Indicates the currently set alarm time minute.

v Upper Dial Hand: Indicates the hour setting of the current alarm time in

24-hour format.

b Lower Dial Hand: Points to AL.



+ @

E-53

To change the alarm time setting

1. In the Timekeeping Mode, press C four times to enter the Alarm Mode.

 The b

Lower Dial hand will move to AL.

2. Pull out the crown to enter the alarm setting mode.

 If you do not perform any operation with the crown for about two minutes after pulling it out, crown

operations will become disabled and the watch hands will no longer move when you rotate the

crown. If this happens, push the crown back in and then pull it out again.

 You can toggle between the hour and minute setting mode, and the hour only setting mode by

pressing C.

Hour/Minute

Hour

3. Rotate the crown to set the alarm time.

 The z Hour Hand will also move.

 See “Using the Crown” (page E-3) for information about high-speed hand movement.

4. Press C to switch to the hour setting mode.

 The z

Hour Hand will move slightly left and right to indicate the z Hour Hand setting mode.

 Check the 24-hour time indicated by the v

Upper Dial Hand to see if the current setting is a.m. or

p.m.

5. Rotate the crown to adjust the hour setting only.

 See “Using the Crown” (page E-3) for information about high-speed hand movement.

E-54

6. After the setting is the way you want, push the crown back in to exit the alarm setting mode.

 The alarm always works based on the time kept in the Timekeeping Mode.

 The watch will return to the Timekeeping Mode automatically if you do not perform any operation in

the Alarm Mode for about two or three minutes.

To turn the alarm on or off

In the Alarm Mode, press A to toggle the alarm between on and off. The x

Second Hand will indicate the

current ON/OFF setting.

Note

 The alarm will not sound if battery power is low.

 The alarm will not sound if the watch is in the Power Saving sleep state.

To stop the alarm

Press any button.

E-55

Adjusting Home Positions

Strong magnetism or impact can cause the hands and/or day indicator setting to be off, even if the watch

is able to perform the time calibration signal receive operation.

Auto Home Position Adjustment

Auto correction of hand home positions corrects the hand position automatically.

 Auto correction is performed in the Timekeeping Mode only.

 Auto correction corrects the positions of all hands. For the day Indicator, you must perform the manual

adjustment procedure under “To adjust home positions” (page E-56).

 If the v

Upper Dial Hand is 12 hours off of the current correct time, correct the setting using the

procedure under “To adjust home positions” (page E-56).

Manual Home Position Adjustment

Perform the procedure in this section if auto home position adjustment is not possible for some reason.

 Hand home position adjustment is not required if the time and day settings are correct.

Note

 Any time after you enter the home position adjustment mode in step 2 of the following procedure, you

can return to the Timekeeping Mode by pushing the crown back in. In this case, any adjustments you

made before the watch returned to the Timekeeping Mode will be applied.

 If you do not perform any operation with the crown for about two minutes after pulling it out, crown

operations will become disabled and hands will not move if you rotate the crown. If this happens, push

the crown back in and then pull it out again.

Casio 5325 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5325

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info