Bedienungsanleitung Ciclo CM 8.2 Master (Seite 6 von 10) (Englisch)

588919

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Clock / Zeit

Adjustment of the clock format

Default: 24

Set with right button, store with left button

Here you can select between 24- or 12-hour format (AM/PM).

SET HR / SET HF

Adjustments for the optional heart rate measurement. To use this

function you need the optional heart rate-set (available at your local

dealer).

HR OFF/ON / HF EIN/AUS

Switch heart rate on/off (ON/AN – OFF/AUS)

Default: OFF/AUS

Set with right button, store with left button

Here you can switch on/off the heart rate measuring.

HR INISCAN

To start this function, simultaneously press the left and right buttons

briefly, jump setting with left button.

To initialize the heart rate transmitter (for first use or after battery/trans-

mitter change):

First, activate the heart rate transmitter (chap. 2.2) then press the left

and right buttons simultaneously. A percentage will be displayed in the

upper display. If transmitter has been initialized successfully, the next

setting option will be displayed.

If transmission could not be initialized (e.g. transmitter was not activa-

ted) “error” will be displayed in the upper display. By pressing the left

and right buttons simultaneously the search for the transmitter will be

started again, to jump this setting press left button.

Fitness / Fitness

Adjustment of the fitness level.

Default: 3

Set with right button, store with left button.

Range 1-4, corresponding to the following levels:

1 – low fitness

2 – average fitness

3 – good fitness

4 – high fitness

Here you set your personal fitness level, necessary for the CICLOInZone

calculation.

Sex / Geschlecht

Set with right button, store with left button.

Change between

m = male and f = female.

The sex is needed for the CICLOInZone

-calculation and the calorie

consumption.

Weight / Gewicht

Range: 20 to 220 kg

Set with right and left button, store with left button.

The weight is needed for the CICLOInZone

-calculation and the calorie

consumption.

Birthdate /Gebjahr

Adjust with right and left button, store with left button.

Default: 1960

Range: 1920 to 2006

The year of birth is necessary for the CICLOInZone

-calculation.

InZone

Here you can start the CICLOInZone

-calculation by short pressing

of right and left button simultaneously (see also chap. 4 for

CICLOInZone

In order to ignore the calculation, just press short left button.

In order to obtain an exact calculation of ones personal CICLOInZone

it is necessary to insert the personal data relative to fitness-level, sex,

weight and birthdate.

In order to calculate the CICLOInZone

position the chest belt correct-

ly, take up a rest position (remain seated and relaxed) and start the

CICLOInZone

calculation by short pressing of right and left button

simultaneously.

The CM 8.2 will then start to time 5 minutes. During this time, stay

seated, relaxed and calm, as the CM 8.2 will measure the minimum

heart rate reached during this period (heart rate at rest) and will store

this value for the subsequent calculation.

After the 5 minutes the lower value of the calculated personal

CICLOInZone

appears in the display.

Lower HR / untere HF

A lower heart rate limit can be set here or (after CICLOInZone

-calcula-

tion) the calculated value is shown.

When the current heart rate is lower than this value, the CM 8.2 shows

an arrow (t) as an optical alarm.

Range: 0 to 220 bpm

Adjust with right and left button, store with left button

Upper HR / obere HF

An upper heart rate limit can be set here or (after CICLOInZone

calculation) the calculated value is shown.

When the current heart rate is higher than this value, the CM 8.2 shows

an arrow as an optical alarm.

Range: 0 to 240 bpm

Adjust with right and left button, store with left button

Max HR / Max HF

Shows the maximum heart rate, calculated with CICLOInZone

Range: 0 to 240 bpm

Adjust with right and left button, store with left button

SET MISC

Here you can switch on the powerdown-mode or make a reset (delete

all values).

Choose with centre button

Powerdown / STROMSPAR

Switch on the powerdown-mode (e.g. before changing of the battery,

to save the values).

To switch it on, press right and left button short simultaneously, display

fades out and CM 8.2 is in powerdown-mode. By short pressing of any

button, CM 8.2 starts again and shows normal mode.

Reset / Löschen

Here you can delete all values (including the total values). For this press

right and left button short simultaneously, display shows ‘reset’ and

then normal mode.

If you only want to delete the day values only, simultaneously press all

three buttons for three seconds in normal mode.

PC-LINK

To start PC transmission.

Select with centre button.

LINK / VERBINDEN

If USB-Interface has been connected, start connection by pressing left

and right buttons simultaneously. For further actions, see chapter 7.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo CM 8.2 Master Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo CM 8.2 Master

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info