Bedienungsanleitung Citronic MPCD-X3 (Seite 4 von 18) (Englisch)

455890

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Page 4 of 18

General Functions and Controls

1. USB PORT 1 - This is the USB port where you insert your USB mass storage device (up

to 32gb)

2. SOURCE SELECT - Use this button to select CD/USB1/USB2/MIDI music. Hold the

SOURCE SELECT button for 2 seconds to enter MIDI mode.

3. BRAKE, START DIAL

a. BRAKE DIAL – When the BRAKE dial is rotated to MIN, play stops instantly; when

the dial is rotated from MIN up to MAX, play slows down before coming to a

complete stop.

i. When in VINYL mode, the BRAKE dial determines the deceleration speed

until play stops, when the top of the jog wheel is held down

(Note: It is advised

to hold the side of the jog wheel with one hand while doing this as any movement from the jog

wheel at this point will cause the unit to go in to scratch mode)

ii. When in CD DJ mode, this BRAKE dial determines the deceleration speed

until play stops when the PLAY/PAUSE button is pressed.

b. START DIAL - When the START dial is rotated to MIN, play will start instantly.

When the dial is rotated between MIN up to MAX, play starts slowly before reaching

full playback speed.

i. When in the VINYL mode, this START dial determines the acceleration speed

until full playback speed is reached when using the jog wheel to scratch,

backspin or stop the track.

ii. When in the CD DJ mode, this START dial determines the acceleration speed

until full playback speed is reached when the PLAY/PAUSE button is pressed.

4. TEMPO RANGE BUTTON - Press the button to choose pitch percentage adjustment

percentage. ±6%, ±10%, ±16%, and ±100%. With this button you can also switch the

PITCH SLIDER on or off by pressing and holding it for 2 seconds.

5. KEY LOCK - This button turns on or turns off the KEY LOCK function. This function

allows you to use the PITCH SLIDER to speed up or slow down playback speed but

without altering the tonal pitch of the track.

6. TOGGLE BUTTON (WHEEL MODE) - Press the TOGGLE button to select the operation

mode: VINYL/CD DJ/A.CUE SCRATCH.

a. VINYL - When wheel mode is set to VINYL, use the JOG WHEEL to activate the

scratch effect by touching the surface of JOG WHEEL and moving it clockwise and

anti clockwise.

b. CD DJ - When wheel mode is set to CD DJ use the JOG WHEEL to pitch bend and

frame search.

c. A.CUE SCRATCH

i. IN PLAYBACK MODE - While music is playing, the JOG WHEEL can be used

to return the unit to last set CUE point (using the IN button). Simply touch

the JOG WHEEL and unit will immediately return to the last set CUE point.

ii. IN CUE MODE - While the music is not playing (CUE mode), tapping the JOG

WHEEL will start the playback. Hold your finger on the jog wheel to continue

playback. When your finger is released the music will stop and go back to

the last CUE point.

7. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. Move the

slider down to speed up the music and move the slider up to slow down the music.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Citronic MPCD-X3 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info