Bedienungsanleitung Citronic MPCD-X3 (Seite 5 von 18) (Englisch)

455890

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Page 5 of 18

8. JOG WHEEL

a. The JOG WHEEL will act as a frame search control when the track is in the pause or

cue mode, allowing you to set a point. Pressing play with create an IN point.

b. The wheel also works as a pitch bend during playback. Turning the wheel clockwise

will increase the pitch percentage up to 100%, and turning the wheel

counterclockwise will decrease the pitch percentage down to -100%. The pitch

bend will be determined on how long you turn the jog wheel continuously.

c. The JOG WHEEL can be used with the hold of the TIME and RATIO knob to set

effects and samples parameter adjustment.

There are several varied modes which can be adjusted for Jog Wheel light ring.

1. To select light ring you desired; press PRESET button to enter internal menu, and turn

FOLDER knob to search “JOG MODE” menu.

2. Turn the TRACK knob to select the different MODES you want to adjust.

3. Press SHIFT button and turn TRACK knob to adjust the setting value.

a. MODE 1 - Will show the playing point indicator around the ring. You can adjust the

setting value range 1 of smallest indicator to 23 of full circle indicator.

b. MODE 2 - Will indicate the playing point opposite (on->off / offon) when the Jog

Wheel is touched. You can adjust the setting value range 1 of smallest indicator off to

23 of full circle off.

c. MODE 3 - Will show the playing point indicator around the ring and flash to the playing

level in both sides. You can adjust the setting value range 1 of smallest playing point

indicator to 23 of full circle indicator.

d. MODE 4 - Will flash to the playing level around the ring.

e. MODE 5 - Will always be on. You can adjust the setting brightness range 1 to 100.

f. MODE 6 - Will flash related to the setting speed. You can adjust the setting speed range

1 of fast flash to 100 of slow flash.

g. MODE 7 - Will show the playing point similar to trail effect.

h. MODE 8 - Will light when the JOG WHEEL is touched.

9. T

AP BUTTON - This button is used for manual BPM. When in manual BPM mode, tap this

button to the beat of the current track. Hold the TAP button for 1 second to activate Auto

BPM.

10. PITCH BEND BUTTONS - The desired pitch of CD increase when button “+” is held and

decreases when button “-” is held. The music returns to the original pitch when either

button is released.

11. BANK BUTTONS 1~4 - These buttons are used to store either four cue points or four

samples. (For more information go to SAVE BUTTON)

The stored CUE points will become samples when you change to another CD or USB

device to play.

12. SAMPLE BUTTON - Press this button, then press the desired BANK button to set the

sample loop mode (LED on). When sample mode is set, then sampler will mix the music

together. Press the SAMPLE button again to set the sample single mode (LED flashing),

press the SAMPLE button again to cancel sample function..

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Citronic MPCD-X3 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info