646306
17
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
17 EN
1. Make sure that the device is not connected to the mains power.
2. Fill the measuring cup (5) up to the MAX marking with water.
3. Pull the seal plug (9) from the water reservoir (6). Please note that it cannot be com-
pletely detached from the device.
4. Pour the water from the measuring cup into the water res-
ervoir.
5. Press the plug rmly into the opening of the reservoir.
Make sure that the water reservoir has been rmly sealed
shut.
Use
CAUTION!
Danger of scalding! This device works with hot steam! Use the device with care and
only ever hold it by the handle while you are operating it.
Never direct the steam at people, animals or plants. This can cause severe scalding.
Never attempt to smooth clothes while somebody is wearing them.
Only use the device in places where heat and moisture cannot cause any damage.
Shortly after use, place it down on a water-resistant and heat-resistant surface.
Never use the device without water to prevent damage to the device.
Open the water reservoir only to ll it. Otherwise keep it closed during operation.
The device should only be used when the control lamp has gone out. Operating
temperature has then been reached. If the device is used before the control lamp
has gone out, hot water may escape – danger of scalding!
Before using the device, read the care instructions for the fabric which is to be
smoothed. Some fabrics and also leather and suede must not be steamed!
Test the device rst on a small, inconspicuous spot before you treat a fabric for the
rst time.
Do not hold down the steam release button continuously during use. This reduces
the steam pressure.
Never leave the device unattended while it is connected to the mains power and
keep children and animals away from it.
Remove the mains plug from the plug socket after use or when taking a break to
prevent personal injury or damage to property.
Delicate items of clothing should be steamed inside out.
Trousers are easier to smooth if they are hung up by the trouser legs.
1. If you have not already done so, mount the attachment of your choice (see the
Mounting / Removing Attachments” chapter) and pour water into the water reservoir
(see the “Filling the Water Reservoir” chapter).
2. Insert the mains plug into a properly installed plug socket that is easily accessible.
The control lamp (3) lights up and the device starts to heat up.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cleanmaxx Z 01926 - DF-A002 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info