Bedienungsanleitung Clifford Concept 50 (Seite 20 von 23) (Englisch)

468917

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

How to interpret the LED status indicator

The LED on your car’s dashboard or console will inform you of the system status:

LED Condition Meaning

Off

System is disarmed and in normal operating mode (i.e., valet mode is off)

Valet mode is on, the vehicle can be driven or serviced without having to disarm

Flashing (ignition off)

System is armed and protecting your vehicle

Flashing (ignition on)

Anti-carjacking feature was activated — 20-second countdown to engine shutdown:

Enter your disarming code IMMEDIATELY

Pause between flashes

Either a malfunction (see page 15) or an intrusion was attempted (see page 17)

High-output Medallion™ Siren

All the electronics for the system’s siren are built into your Concept 50’s main control

unit, rather than the siren itself. This protects the circuitry from engine heat, dirt and

exposure to the elements (in contrast, the electronics of other alarm companies’ sirens are

part of the siren itself and, therefore, far more susceptible to failure). In addition to greatly

enhancing long-term reliability, your Concept 50 also provides these additional features:

Personalized Siren Sounds: Most alarm sirens have a single “warble” tone. A few

offer “six-tone” sirens that either cannot be adjusted or require the physical

destruction of certain circuit wires in order to change the sounds (the change is

permanent and cannot be changed again). Your Concept 50 Medallion Siren

circuitry is different. As shipped from the factory, the siren sounds six different

alarm sound patterns. However, you may turn any of the six different alarm sound

patterns on or off to create a different combination of sound patterns. In all, there

are 64 different combinations you may select. You may set your own Personalized

Siren Sounds so if you hear a siren at a distance, you will know for sure whether it

is your car or someone else’s. See User-selectable features on pages 19–21.

QuietChirps™: You can control the volume of the normal arm/disarm chirps. As

shipped from the factory, your system issues full-volume chirp acknowledgments. If

you prefer, you may reduce the chirp volume to a level that is clearly audible, yet

less obtrusive. See the User-selectable features section on pages 19–21.

Long-term chirp silencing: Whenever you wish, you may silence your Concept

50’s arm/disarm chirps until you decide to restore them. The parking light flashes

will continue to provide visual confirmation of remote controlled arming and

disarming. See

User-selectable features

on pages 19–21, also see the

Remote

QuickAccess features on page 16.

Remote controlled chirp muting: Remote controlled chirp muting capabilities are

especially valuable when parking late at night in a quiet residential area. To arm or

disarm silently, simply press button 3 (channel 3) on your remote control instead of

the usual button 1 (channel 1).

Siren duration: When the system detects an intrusion attempt, the alarm is set to

sound for 30 seconds. However, if you prefer, you may change it to 60 seconds.

See the

User-selectable features

section on pages 19–21.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clifford Concept 50 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info