Bedienungsanleitung Clifford Concept 50 (Seite 18 von 23) (Englisch)

468917

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Multiple-event TotalRecall™

The system’s non-volatile memory records the identity of the last eight activated or

malfunctioning triggers and/or sensors, which allows your installer to instantly track down

malfunctions and save you substantial servicing costs. To identify the triggers and/or sensors

held in the system’s non-volatile memory, simply perform the following procedure:

1. With the ignition OFF, flick the PlainView valet switch to its latched side.

2. Press button I to “arm” the system, then again to “disarm.”

3. The LED will blink 1–6 times to indicate the most recently activated trigger or

sensor, pause, then blink 1–6 times to indicate the next most recently activated

trigger or sensor, and so on for the last 8 activations (beginning with the most recent).

4. Write down the number of blinks between pauses and refer to the chart below:

Number of LED blinks per cycle Trigger/sensor that was activated or malfunctioned

1 blink

Magnetic Resonance Sensor

2 blinks

Glass tampering sensor

3 blinks

Door trigger

4 blinks

Trunk trigger

5 blinks

Hood trigger

6 blinks

Proximity Sensor or other optional sensor

Headlight reminder

If you turn the ignition off and open the driver’s door to exit the car without having turned

off the headlights, you will be reminded to turn them off with a distinctive warning tone.

If your vehicle already has a similar warning feature, you may turn off your Concept

50’s Headlight Reminder. See the User-selectable features section on pages 19–21.

Remote QuickAccess™

For the greatest ease of use, the Remote QuickAccess features permit you a quick and

easy way of controlling, with just the remote, the most commonly used features. You

can control either of these features any time via your remote control. Here’s how:

QuickAccess Valet Mode: To enter valet mode remotely, transmit channel 10

(press the LevelShift button on the side of the remote control twice, then press

button 2). The parking lights will flash twice and the dashboard LED will stay on

to indicate the system is in valet mode. To exit valet mode remotely, transmit

channel 10 again and the system will exit of valet mode with one parking light

flash and the LED will turn off. (NOTE: If you enter valet mode via the remote

control, exit valet mode in the same manner. If you use the PlainView switch to

enter valet mode, use the switch to exit valet mode.)

QuickAccess Long-Term Chirp Silencing: To silence the chirps, transmit channel 9

(press the LevelShift button on the side of the remote control twice, then press

button 1). The parking lights will flash twice to indicate that long-term chirp

silencing is on. To restore the chirps, transmit channel 9 again and the system will

confirm restoration of the chirps with one flash of the parking lights.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clifford Concept 50 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info