634453
19
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
MAINTENANCE
WARNING! Before carrying out any repairs or
servicing work, you must ensure that the product
has been disconnected from the power supply. Repairs
and maintenance work other than those described
within this instruction manual may be performed only by
an authorised service agent.
1. SERVI
CE AND STORAGE
To ensure long and reliable service, carry out the following
maintenance regularly. Servicing and cleaning work on the
product and the removal of the guards may only be carried
out after the motor has been switched off and the plug
disconnected from the power supply.
1). Regularly check for obvious defects such as loose,
dislodged or damaged chain and guide bar, loose
fixings and worn or damaged components.
2). Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using the product.
3). If the cutting device should happen to fail despite the
care taken in manufacturing and testing, repair should be
carried out by an authorised specialist.
4). Do not clean the product while it is running.
5). Ensure that all the fastening elements (screws, nuts,
etc.) are tight at all times so that you can safely work with
the product.
6). Check the pr
oduct frequently for signs of wear. Replace
worn or damaged parts.
7). Store your product in a dry place. To ensure a long
service life all screw parts should be cleaned and then oiled.
8). Clean the product with a brush or cloth. Do not use any
solvents or water to remove dirt.
9). The component that is subject to most wear is the cutting
device. You should therefore check the condition of the cutting
device and its mounting at regular intervals.
- If the cutting device is worn or blunt it must be replaced
immediately.
- If the product starts to vibrate excessively, this means
that the cutting device has not been balanced correctly or
has suffered deformation due to impacts. In this case it
must be repaired or replaced.
26/02/2013 v1
19
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cobra S32E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info