634453
20
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
Fig. 11a
raking cylinder with fine needles
Fig. 11b
2. REPL
ACING/CHANGING THE CUTTING DEVICE
WARNING! Always switch the product off,
disconnect it from power supply and let it cool down
before changing/replacing the cutting device!
WARNING! Always use the correct cutting device
according to the intended use! Observe the technical
requirements of this product (see the Technical specifications
section) when purchasing and using cutting devices!
Cutting devices are very sharp and become hot
during use! Handle them carefully!
Wear safety gloves when handling cutting devices in order to
avoid injuries like burns and cuts!
WARNING! Make sure the two bolts are completely
tight before using the product, don't use the product
if any of the bolts are missing or loose.
If a bolt thread is damaged, it must be replaced before the
machine can be used safely. You can replace it with one of a
suitable size.
The product has two functions, scarifying or raking. The
scarifying cylinder is preassembled on the product. The
raking cylinder is included in the supply box. The cylinder
can be changed a
ccording to the different applications. (See Fig.
11a, 11b)
1). Rem
ove the grass catcher.
2). Place the product upside down on a flat stable ground to
access the underbody.
3). Loosen the two bolts (22a) with a suitable wrench,
remove them together with the spring washers (22b) and
the attached cutting device (21 or 23). (See Fig. 12a).
4). To remove the cutting device, first lift the bearing and
then pull it off of the drive shaft (25).
Fig. 12a
Fig. 12b
5). Alig
n and insert the respective cutting device: Slide
the hex nut into the socket of the driving shaft (25) and fix
the bearing to the support with the bolts (22a) and spring
washers (22b). (See Fig. 12b).
26/02/2013 v1
20
scarifying cylinder with blades
22a
22b
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cobra S32E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info